Re: Able to build 0.3.5 release src, unable to build SVN src



Hi Richard,

f-spot is still using glade-2. and badly...

So, if you want to modify the f-spot.glade file, here's the required
steps...

1) get a fresh f-spot.glade from svn
2) open it with glade-2, don't edit anything, save the file
3) svn diff f-spot.glade > fspotsuckswithgladefile (or any other
name...)
4) open the f-spot.glade with glade-2, do what you have to...
5) patch -p0 -R < fspotsuckswithgladefile

and compile...

"the power of ml archive" had the answer for weeks ;);)

regards

s



On Wed, 2007-03-21 at 11:51 -0400, Richard Bronosky wrote:
> getting closer...
> 
> Now, I'm trying to open the glade file and get:
> Failed to load /home/rbronosky/development/f-spot/trunk/src/f-spot.glade.
> The following required catalogs are unavailable: gnomecanvas
> 
> Based on http://glade.gnome.org/docs/catalogintro.html I tried to
> check "pkg-config --variable=catalogdir glade-3" but it returned
> nothing.
> 
> I have libgnomecanvas2-0 installed, but glade-3 still gave me this
> error.  So I tried guile-gnome0-canvas, same error.  I've installed
> hundreds (no exaggeration) of packages trying to learn to do one
> simple thing to f-spot.
> 
> Okay, I'm willing to accept that I'm going about this all wrong.  I
> started a week ago trying to show my wife "the power of open source"
> by adding a shortcut to "remove tag from selection"  I thought it
> would be as easy as adding an accelerator tag to the f-spot.glade xml
> and recompiling.  I finally got it to recompile, but there is no
> shortcut.
> 
> I'd like to know 2 things:
> 1. How should go about making interface tweaks?
> 2. How can I learn to actually develop on the application?  That's
> where I ultimately want to go with this.
> 
> I feel like I start what should be a simple task only to find 3
> technologies I know nothing about.  I spend 3 days skimming the
> surface of each of those 3 technologies.  During which, I find they
> each involve 3 technologies that will take me 3 days each to skim the
> surface of.  I'm 28 and in good health, but I don't think I'll be
> alive long enough to get my photos organized.
> 
> On 3/21/07, Bengt Thuree <bengt thuree com> wrote:
> > Hi
> >
> > Had the same problem.
> > Unfortunately I did not really save the proper procedure for what I did
> > to solve it.
> >
> >
> > You need to modify the gnome-doc-utils.make file and ensure that the
> > syntax is correct.
> > The IF statements should be preceeded with a <TAB>
> > and changed to be proper IF ENDIF.
> >
> > I'll attach a diff, which is properly not correct, but could be used as
> > a reference.
> >
> > /Bengt
> >
> > On Wed, 2007-03-21 at 10:46 -0400, Richard Bronosky wrote:
> > > That got me past the autogen.  Now during the make, I'm getting and
> > > error out of gnome-doc-utils.make that is ungooglable.
> > >
> > > rbronosky IT-f1-rbronosky-p:~/development/f-spot/trunk$ make
> > > cd . && autoheader
> > > make  all-recursive
> > > make[1]: Entering directory `/home/rbronosky/development/f-spot/trunk'
> > > Making all in dbus-sharp
> > > make[2]: Entering directory
> > > `/home/rbronosky/development/f-spot/trunk/dbus-sharp'
> > > gmcs -debug -target:library -out:NDesk.DBus.dll -unsafe  -r:Mono.Posix
> > > ./Address.cs                     ./AssemblyInfo.cs
> > > ./Authentication.cs             ./Bus.cs
> > > ./BusObject.cs                  ./Connection.cs
> > > ./DBus.cs                       ./DProxy.cs
> > > ./ExportObject.cs
> > >                 ./Introspection.cs              ./Mapper.cs
> > >          ./MatchRule.cs                  ./Message.cs
> > >   ./MessageFilter.cs       ./MessageReader.cs
> > > ./MessageWriter.cs              ./Protocol.cs
> > > ./Server.cs                     ./Signature.cs
> > > ./SocketTransport.cs              ./Transport.cs
> > > ./UnixNativeTransport.cs        ./UnixTransport.cs
> > > ./Wrapper.cs
> > > make[2]: Leaving directory `/home/rbronosky/development/f-spot/trunk/dbus-sharp'
> > > Making all in dbus-sharp-glib
> > > make[2]: Entering directory
> > > `/home/rbronosky/development/f-spot/trunk/dbus-sharp-glib'
> > > gmcs -debug -target:library -out:NDesk.DBus.GLib.dll
> > > -r:../dbus-sharp/NDesk.DBus.dll ./AssemblyInfo.cs
> > > ./GLib.IO.cs                    ./GLib.cs
> > > make[2]: Leaving directory
> > > `/home/rbronosky/development/f-spot/trunk/dbus-sharp-glib'
> > > Making all in docs
> > > make[2]: Entering directory `/home/rbronosky/development/f-spot/trunk/docs'
> > > ../gnome-doc-utils.make:474: *** missing separator.  Stop.
> > > make[2]: Leaving directory `/home/rbronosky/development/f-spot/trunk/docs'
> > > make[1]: *** [all-recursive] Error 1
> > > make[1]: Leaving directory `/home/rbronosky/development/f-spot/trunk'
> > > make: *** [all-recursive-am] Error 2
> > >
> > >
> > >
> >
> >
> 
> 
> -- 
> .!# RichardBronosky #!.
> _______________________________________________
> F-spot-list mailing list
> F-spot-list gnome org
> http://mail.gnome.org/mailman/listinfo/f-spot-list
> 
-- 
Stephane Delcroix
stephane delcroix org




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]