Re: [Evolution] palm treo 600 sync

["Veerapuram Varadhan" <vvaradhan novell com>]

On Thu, 2005-12-01 at 03:22 +0000, techy darkerforce com wrote:
> Sorry, I am running FC4 and as for evo-pilot, can't seem to find a
> version even close.  The only one comes from the old ximian days.
>
> There is a SUSE version which has numerous dependencies, before I
> attempt that attack, any other ideas ?
>
> tnx again ...
Ok, this weird synaptic-mouse-pad seems dangerous at times.. it clicked
"send button" before I finish writing my mail...

I was about to say.. "Hope this helps", before hitting send. 

V. Varadhan

> lr
>
> On Sun, 2005-11-27 at 10:14 +1100, Andrew Greig wrote:
> > Hi,
> > You haven't told us what distro and version you are using.  Have you
> > installed evolution-pilot?  I suspect not, because the conduits
which
> > you are missing normally only turn up after it's installed.
> >
> > To see if the kernel is handling the synch OK you could see how you
get
> > on with JPilot.
> >
> > Andrew Greig
> > Melbourne, Australia
> >
> >
> >
> >
> > On Fri, 2005-11-25 at 09:23 -0500, Techy wrote:
> > > ok, this is the biggie, I have (as you saw from the subject) a
palm
> > > treo
> > > 600 which I want to sync with evo and have had no luck with.  The
> > > basics
> > > are;
> > >
> > > HW: Dell Inspiron 300M
> > > Palm connecting via USB.
> > >
> > > When I connect the 1st time, I do get a connect on the palm quick
> > > sync,
> > > clean-up and that's it.  message file shows:
--------------------------------------------------------------------------
> > > Nov 23 11:01:52 vader kernel: drivers/usb/serial/usb-serial.c: USB
> > > Serial suppor t registered for Sony Clie 5.0
> > > Nov 23 11:01:52 vader kernel: visor 2-1:1.0: Handspring Visor /
Palm
> > > OS
> > > converte r detected
> > > Nov 23 11:01:52 vader kernel: usb 2-1: Handspring Visor / Palm OS
> > > converter now attached to ttyUSB0
> > > Nov 23 11:01:52 vader kernel: usb 2-1: Handspring Visor / Palm OS
> > > converter now attached to ttyUSB1
> > > Nov 23 11:01:52 vader kernel: usbcore: registered new driver visor
> > > Nov 23 11:01:52 vader kernel: drivers/usb/serial/visor.c: USB
> > > HandSpring
> > > Visor /  Palm OS driver v2.1
> > > Nov 23 11:02:01 vader kernel: usb 2-1: USB disconnect, address 4
---------------------------------------------------------------------------
> > > If I try to re-sync I get:
> > > Nov 23 11:05:47 vader kernel: usb 2-1: Handspring Visor / Palm OS
> > > converter now attached to ttyUSB2
> > > Nov 23 11:05:47 vader kernel: usb 2-1: Handspring Visor / Palm OS
> > > converter now attached to ttyUSB3
> > > Nov 23 11:05:49 vader kernel: visor ttyUSB1: visor_write -
> > > usb_submit_urb(write bulk) failed with status = -19
> > > Nov 23 11:06:01 vader last message repeated 2 times
> > > Nov 23 11:06:02 vader kernel: usb 2-1: USB disconnect, address 5
---------------------------------------------------------------------------
> > > One thing I noticed, in Tools/Pilot/Conduits I only see:
> > > Expense
> > > MAL
> > > MemoFile
> > > Sendmail
> > > Time
> > > (all of which are disabled except Memofile)
> > >
> > > I thought a while back this is where I put contacts, calendar,
to-do,
> > > etc. the things I really want to sync.
> > >
> > > Also, if I do a pilot-xfer -L -p /tmp/pilot wait a sec, hit the
sync
> > > button I get a connect success and it does list all the apps /
files.
> > > And it currently sync's 100% with JPilot which is okay, but I use
evo
> > > 100% and to swich apps for things like that are foolish.
> > >
> > > Any help / direction is appreciated.
> > >
> > > Lance 
> > > _______________________________________________
> > > Evolution-list mailing list
> > > Evolution-list gnome org
> > > http://mail.gnome.org/mailman/listinfo/evolution-list
> > Andrew Greig
> > ABN 52 219 423 734
> > 15 Leslie Ave Boronia Vic 3155
> > 0418 581 649
> > algreig bigpond net au
> >
> >
> >
> >
> > Yours faithfully
> >
> > Andrew