Re: [Ekiga-list] Log

[Eugen Dedu <Eugen Dedu pu-pm univ-fcomte fr>]

There is something fishy here.  In 3.2.7 log network detection detects 
an address (120.28.176.142) different than in 4.0.0 (180.190.15.16).  Do 
you know why and what are those two addresses?

On 16/01/13 05:07, Jan Laugesen wrote:
> Hi,
> It did register now, so here is the log: http://pastebin.ca/2303131
> I had to end the process via the taskmanager before Ekiga was closing.
> Even it says registered, ppl are not able to hear me when I'm making
> outbound calls.
> Thanks
>
> *Gesendet:* Dienstag, 15. Januar 2013 um 17:35 Uhr
> *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
> *An:* "Ekiga mailing list"<ekiga-list gnome org>
> *Betreff:* Re: [Ekiga-list] Log
> I prefer to fix this issue... Could you try with -d 4 a few times,
> hopefully it will register once, and send me the file when it registers?
>
> Alternatively, you could use ekiga normally (without -d 4) and start
> wireshark in the same time, and give me the 20-30 packets exchanged
> shown in wireshark, if you know how to do it..
>
> On 13/01/13 02:59, Jan Laugesen wrote:
>   >  Hi,
>   >  When I'm using the "ekiga.exe -d 4" it's not registering...I thought it's never
>   >  registering when u open in debug? It is registering when I'm opening Ekiga. It's
>   >  fine with me to use the old version, since it's working ;)
>   >  http://pastebin.ca/2301664
>   >  Thx
>   >
>   >  *Gesendet:* Freitag, 11. Januar 2013 um 15:00 Uhr
>   >  *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
>   >  *An:* "Ekiga mailing list"<ekiga-list gnome org>
>   >  *Betreff:* Re: [Ekiga-list] Log
>   >  In the 3.2.7 log the registration is not successful, please give me a
>   >  log where 3.2.7 does register.
>   >
>   >  On 11/01/13 13:57, Jan Laugesen wrote:
>   >  >  Hi,
>   >  >  hope it's right now with the %limit thing....
>   >  >  here is the log 4.0: http://pastebin.ca/2301327
>   >  >  here is the log 3.2.7: http://pastebin.ca/2301329
>   >  >  yeah, registration works in that case.
>   >  >  Thanks
>   >  >
>   >  >  *Gesendet:* Freitag, 11. Januar 2013 um 10:34 Uhr
>   >  >  *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
>   >  >  *An:* "Ekiga mailing list"<ekiga-list gnome org>
>   >  >  *Betreff:* Re: [Ekiga-list] Log
>   >  >  Jan, your case is a bit difficult, I need to things:
>   >  >
>   >  >  1. with network enabled, and the account *name* as xyz%limit and account
>   >  >  *user* as usual (Mediadev24, not ...%limit... !!!), give me the -d 4 log
>   >  >
>   >  >  2. give me the -d 4 log of ekiga 3.2.7 working. To install that ekiga,
>   >  >  uninstall first ekiga, uninstall gtk, install ekiga 3.2.7 from
>   >  >  http://eugen.dedu.free.fr/aa, start ekiga and check if account
>   >  >  parameters are ok, and finally restart ekiga with -d 4 and give us the
>   >  >  log. (Registration works in this case, is that right?)
>   >  >
>   >  >  Thank you!
>   >  >
>   >  >  On 03/01/13 05:57, Jan Laugesen wrote:
>   >  >  >  Sry, will only reply to my own post in the future.
>   >  >  >  Here is the log with network disabled http://pastebin.ca/2298893
>   >  >  >  Here is the log with network enabled http://pastebin.ca/2298895
>   >  >  >  Thanks
>   >  >  >
>   >  >  >  *Gesendet:* Mittwoch, 02. Januar 2013 um 20:51 Uhr
>   >  >  >  *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
>   >  >  >  *An:* "Ekiga mailing list"<ekiga-list gnome org>
>   >  >  >  *Betreff:* Re: [Ekiga-list] Log
>   >  >  >  Jan, do not answer to other's posts, but to your own post.
>   >  >  >
>   >  >  >  Now, please send us a -d 4 output with network enabled and one with
>   >  >  >  network disabled.
>   >  >  >
>   >  >  >  On 20/12/12 17:43, Jan Laugesen wrote:
>   >  >  >  >  thx so far. here is the log with enable network turned off
>   >  >  >  >  http://pastebin.ca/2295297
>   >  >  >  >  still unregistered even it's turned off and i restart Ekiga.
>   >  >  >  >  Here is the log after i changed the account-name http://pastebin.ca/2295299
>   >  >  >  >  it says processing now.
>   >  >  >  >  it is the ip pool ending address on my router, the one u asked about.
>   >  >  >  >
>   >  >  >  >  *Gesendet:* Donnerstag, 20. Dezember 2012 um 16:47 Uhr
>   >  >  >  >  *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
>   >  >  >  >  *An:* "Ekiga mailing list"<ekiga-list gnome org>
>   >  >  >  >  *Betreff:* Re: [Ekiga-list] Log
>   >  >  >  >  The first problem was solved, but another one surfaced: your
>   >  >  >  >  firewall/router changes packets, for ex. it adds the address
>   >  >  >  >  192.168.254.100, is this address of a firewall/router? I see this:
>   >  >  >  >
>   >  >  >  >  SIP/2.0 200 OK
>   >  >  >  >  CSeq: 2 REGISTER
>   >  >  >  >  Contact:<sip:Mediadev24@192.168.254.100:5060>;expires=3600
>   >  >  >  >
>   >  >  >  >  and:
>   >  >  >  >
>   >  >  >  >  2012/12/20 23:02:56.531 0:05.609 Pool:3840
>   >  >  >  >  SIP REGISTER returned no Contact addresses we requested, not really
>   >  >  >  >  registered.
>   >  >  >  >
>   >  >  >  >  Also, send me a log with Enable network detection checked off and tell
>   >  >  >  >  me if it works.
>   >  >  >  >
>   >  >  >  >  Finally, send me a log with: rename name of account to xyz%limit, quit
>   >  >  >  >  ekiga, restart it and send me the log (and tell me if it works).
>   >  >  >  >
>   >  >  >  >  On 20/12/12 16:07, Jan Laugesen wrote:
>   >  >  >  >  >  I see, that's why. Here is the new log http://pastebin.ca/2295275
>   >  >  >  >  >
>   >  >  >  >  >  *Gesendet:* Donnerstag, 20. Dezember 2012 um 15:43 Uhr
>   >  >  >  >  >  *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
>   >  >  >  >  >  *An:* "Ekiga mailing list"<ekiga-list gnome org>
>   >  >  >  >  >  *Betreff:* Re: [Ekiga-list] Log
>   >  >  >  >  >  On 20/12/12 15:05, Jan Laugesen wrote:
>   >  >  >  >  >  >  Thx for the link. I'm done with the set-up and an Ekiga window (like a
>   >  >  >  cmd) is
>   >  >  >  >  >  >  opening every time I'm logging on, but the status is still
> unregistered.
>   >  >  >  I have
>   >  >  >  >  >  >  tried re-booting and filling in the account-information again, but
>   >  >  seems it's
>   >  >  >  >  >  >  not helping.
>   >  >  >  >  >
>   >  >  >  >  >  The command window is normal, it is because it is a testing .exe for my
>   >  >  >  >  >  purposes, I can do one without it...
>   >  >  >  >  >
>   >  >  >  >  >  Please send me a log with this new version.
>   >  >  >  >  >
>   >  >  >  >  >  >  On 20/12/12 13:02, Jan Laugesen wrote:
>   >  >  >  >  >  >  >  Trying again....Here is the link http://pastebin.ca/2295222
>   >  >  >  >  >  >
>   >  >  >  >  >  >  Ok, this bug was fixed 1-2 weeks ago. You can use
>   >  >  >  >  >  >  http://eugen.dedu.free.fr/ekiga-setup-4.1.0-git-37_gb092039-ok.exe,
>   >  >  >  >  >  >  which has the fix (or wait until a new release appears).
> _______________________________________________
> ekiga-list mailing list
> ekiga-list gnome org
> https://mail.gnome.org/mailman/listinfo/ekiga-list
>
>
>
>
> _______________________________________________
> ekiga-list mailing list
> ekiga-list gnome org
> https://mail.gnome.org/mailman/listinfo/ekiga-list