I prefer to fix this issue... Could you try with -d 4 a few times,
hopefully it will register once, and send me the file when it registers?
Alternatively, you could use ekiga normally (without -d 4) and start
wireshark in the same time, and give me the 20-30 packets exchanged
shown in wireshark, if you know how to do it..
On 13/01/13 02:59, Jan Laugesen wrote:
> Hi,
> When I'm using the "ekiga.exe -d 4" it's not registering...I thought it's never
> registering when u open in debug? It is registering when I'm opening Ekiga. It's
> fine with me to use the old version, since it's working ;)
>
http://pastebin.ca/2301664
> Thx
>
> *Gesendet:* Freitag, 11. Januar 2013 um 15:00 Uhr
> *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
> *An:* "Ekiga mailing list"<ekiga-list gnome org>
> *Betreff:* Re: [Ekiga-list] Log
> In the 3.2.7 log the registration is not successful, please give me a
> log where 3.2.7 does register.
>
> On 11/01/13 13:57, Jan Laugesen wrote:
> > Hi,
> > hope it's right now with the %limit thing....
> > here is the log 4.0:
http://pastebin.ca/2301327
> > here is the log 3.2.7:
http://pastebin.ca/2301329
> > yeah, registration works in that case.
> > Thanks
> >
> > *Gesendet:* Freitag, 11. Januar 2013 um 10:34 Uhr
> > *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
> > *An:* "Ekiga mailing list"<ekiga-list gnome org>
> > *Betreff:* Re: [Ekiga-list] Log
> > Jan, your case is a bit difficult, I need to things:
> >
> > 1. with network enabled, and the account *name* as xyz%limit and account
> > *user* as usual (Mediadev24, not ...%limit... !!!), give me the -d 4 log
> >
> > 2. give me the -d 4 log of ekiga 3.2.7 working. To install that ekiga,
> > uninstall first ekiga, uninstall gtk, install ekiga 3.2.7 from
> >
http://eugen.dedu.free.fr/aa, start ekiga and check if account
> > parameters are ok, and finally restart ekiga with -d 4 and give us the
> > log. (Registration works in this case, is that right?)
> >
> > Thank you!
> >
> > On 03/01/13 05:57, Jan Laugesen wrote:
> > > Sry, will only reply to my own post in the future.
> > > Here is the log with network disabled
http://pastebin.ca/2298893
> > > Here is the log with network enabled
http://pastebin.ca/2298895
> > > Thanks
> > >
> > > *Gesendet:* Mittwoch, 02. Januar 2013 um 20:51 Uhr
> > > *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
> > > *An:* "Ekiga mailing list"<ekiga-list gnome org>
> > > *Betreff:* Re: [Ekiga-list] Log
> > > Jan, do not answer to other's posts, but to your own post.
> > >
> > > Now, please send us a -d 4 output with network enabled and one with
> > > network disabled.
> > >
> > > On 20/12/12 17:43, Jan Laugesen wrote:
> > > > thx so far. here is the log with enable network turned off
> > > >
http://pastebin.ca/2295297
> > > > still unregistered even it's turned off and i restart Ekiga.
> > > > Here is the log after i changed the account-name
http://pastebin.ca/2295299
> > > > it says processing now.
> > > > it is the ip pool ending address on my router, the one u asked about.
> > > >
> > > > *Gesendet:* Donnerstag, 20. Dezember 2012 um 16:47 Uhr
> > > > *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
> > > > *An:* "Ekiga mailing list"<ekiga-list gnome org>
> > > > *Betreff:* Re: [Ekiga-list] Log
> > > > The first problem was solved, but another one surfaced: your
> > > > firewall/router changes packets, for ex. it adds the address
> > > > 192.168.254.100, is this address of a firewall/router? I see this:
> > > >
> > > > SIP/2.0 200 OK
> > > > CSeq: 2 REGISTER
> > > > Contact:<sip:Mediadev24@192.168.254.100:5060>;expires=3600
> > > >
> > > > and:
> > > >
> > > > 2012/12/20 23:02:56.531 0:05.609 Pool:3840
> > > > SIP REGISTER returned no Contact addresses we requested, not really
> > > > registered.
> > > >
> > > > Also, send me a log with Enable network detection checked off and tell
> > > > me if it works.
> > > >
> > > > Finally, send me a log with: rename name of account to xyz%limit, quit
> > > > ekiga, restart it and send me the log (and tell me if it works).
> > > >
> > > > On 20/12/12 16:07, Jan Laugesen wrote:
> > > > > I see, that's why. Here is the new log
http://pastebin.ca/2295275
> > > > >
> > > > > *Gesendet:* Donnerstag, 20. Dezember 2012 um 15:43 Uhr
> > > > > *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
> > > > > *An:* "Ekiga mailing list"<ekiga-list gnome org>
> > > > > *Betreff:* Re: [Ekiga-list] Log
> > > > > On 20/12/12 15:05, Jan Laugesen wrote:
> > > > > > Thx for the link. I'm done with the set-up and an Ekiga window (like a
> > > cmd) is
> > > > > > opening every time I'm logging on, but the status is still unregistered.
> > > I have
> > > > > > tried re-booting and filling in the account-information again, but
> > seems it's
> > > > > > not helping.
> > > > >
> > > > > The command window is normal, it is because it is a testing .exe for my
> > > > > purposes, I can do one without it...
> > > > >
> > > > > Please send me a log with this new version.
> > > > >
> > > > > > On 20/12/12 13:02, Jan Laugesen wrote:
> > > > > > > Trying again....Here is the link
http://pastebin.ca/2295222
> > > > > >
> > > > > > Ok, this bug was fixed 1-2 weeks ago. You can use
> > > > > >
http://eugen.dedu.free.fr/ekiga-setup-4.1.0-git-37_gb092039-ok.exe,
> > > > > > which has the fix (or wait until a new release appears).
_______________________________________________
ekiga-list mailing list
ekiga-list gnome org
https://mail.gnome.org/mailman/listinfo/ekiga-list
