Jan, do not answer to other's posts, but to your own post.
Now, please send us a -d 4 output with network enabled and one with
network disabled.
On 20/12/12 17:43, Jan Laugesen wrote:
> thx so far. here is the log with enable network turned off
>
http://pastebin.ca/2295297
> still unregistered even it's turned off and i restart Ekiga.
> Here is the log after i changed the account-name
http://pastebin.ca/2295299
> it says processing now.
> it is the ip pool ending address on my router, the one u asked about.
>
> *Gesendet:* Donnerstag, 20. Dezember 2012 um 16:47 Uhr
> *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
> *An:* "Ekiga mailing list"<ekiga-list gnome org>
> *Betreff:* Re: [Ekiga-list] Log
> The first problem was solved, but another one surfaced: your
> firewall/router changes packets, for ex. it adds the address
> 192.168.254.100, is this address of a firewall/router? I see this:
>
> SIP/2.0 200 OK
> CSeq: 2 REGISTER
> Contact:<sip:Mediadev24@192.168.254.100:5060>;expires=3600
>
> and:
>
> 2012/12/20 23:02:56.531 0:05.609 Pool:3840
> SIP REGISTER returned no Contact addresses we requested, not really
> registered.
>
> Also, send me a log with Enable network detection checked off and tell
> me if it works.
>
> Finally, send me a log with: rename name of account to xyz%limit, quit
> ekiga, restart it and send me the log (and tell me if it works).
>
> On 20/12/12 16:07, Jan Laugesen wrote:
> > I see, that's why. Here is the new log
http://pastebin.ca/2295275
> >
> > *Gesendet:* Donnerstag, 20. Dezember 2012 um 15:43 Uhr
> > *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
> > *An:* "Ekiga mailing list"<ekiga-list gnome org>
> > *Betreff:* Re: [Ekiga-list] Log
> > On 20/12/12 15:05, Jan Laugesen wrote:
> > > Thx for the link. I'm done with the set-up and an Ekiga window (like a cmd) is
> > > opening every time I'm logging on, but the status is still unregistered. I have
> > > tried re-booting and filling in the account-information again, but seems it's
> > > not helping.
> >
> > The command window is normal, it is because it is a testing .exe for my
> > purposes, I can do one without it...
> >
> > Please send me a log with this new version.
> >
> > > On 20/12/12 13:02, Jan Laugesen wrote:
> > > > Trying again....Here is the link
http://pastebin.ca/2295222
> > >
> > > Ok, this bug was fixed 1-2 weeks ago. You can use
> > >
http://eugen.dedu.free.fr/ekiga-setup-4.1.0-git-37_gb092039-ok.exe,
> > > which has the fix (or wait until a new release appears).
_______________________________________________
ekiga-list mailing list
ekiga-list gnome org
https://mail.gnome.org/mailman/listinfo/ekiga-list
