Re: [Ekiga-list] Difference between 500 and 520 echoes

[Eugen Dedu <Eugen Dedu pu-pm univ-fcomte fr>]

On 21/03/12 17:19, Eugen Dedu wrote:
> On 21/03/12 17:13, geo cherchetout wrote:
> > Le 21/03/2012 16:30, *Eugen Dedu* a écrit fort à propos :
> >
> > > > 5060:5100
> > >
> > > Could you increase these values to 5060:65000 for example and retry?
> >
> > Done.
> >
> > > Also, check off all g726* audio codecs.
> >
> > Not any g726 audio codec whas enabled. Only PCMA, PCMU, Speex and iLBC
> > are.
>
> You are right, sorry. Please check off h263 and mp4v-es video codecs and
> try again.
>
> In fact, I noticed two strange things in your log:
> - your packet is greater than about 1500 bytes, yet it is still received
> by ekiga.net. You are connected via a cable (Ethernet), not wi-fi, is
> that right?
> - you do not use 5060 port, but another one, however here it works with
> another port too, maybe it would be useful to bind to the classical 5060
> port (/apps/ekiga/protocols/sip/listen_port)

And especially this one:
2012/03/20 17:52:12.955   0:29.348         CallSetup:0x56873700 STUN
  Could not get a pair of adjacent port numbers from NAT
which means that it did not succeed to bind to two adjacent ports, which 
is very very strange...

> > sip:500 ekiga net works perfectly.
> >
> > sip:520 ekiga net : A communication with PCMA-H261 codecs seems to be
> > established and doesn't automatically finishes.
>
> THAT is the problem, I do not know why you do not receive the BYE
> message from 520. Here it works...


--
Eugen