Re: [Ekiga-list] audio input not working

[Giorgio <gio_6b yahoo it>]

Il 22/03/2011 15:53, Eugen Dedu ha scritto:
> On 14/03/11 19:19, Giorgio wrote:
> > Il 14/03/2011 18:17, Eugen Dedu ha scritto:
> > > On 13/03/11 19:43, Giorgio wrote:
> > > > When I run echo test I hear the message but I get no echo of my voice.
> > > > Same during call: I hear the voice but my friend don't hear me.
> > > >
> > > > Of course my hardware works normally with others SW. In Windows 7 
> > > > Ekiga
> > > > audio works with same hardware.
> > > >
> > > > OS: Linux Mandriva 2010.2 64 bit,
> > > > Ekiga 3.2.6
> > >
> > > You need to send us the debug output (-d 4).
> > The file has been created during the following operations:
> >
> > 1) start Ekiga from terminal with this command/ekiga -d 4
> > 2>ekiga_debug_1.txt/
> > 2) wait till opening is complete
> > 3) call echo test
> > 4) wait end of echo test message
> > 5) speak several times into microphone
> > 6) close Ekiga
> >
> > hope it's what you asked for.
> > Attached you'll find the compressed version of file.
>
> Giorgio, here is what opal developer says about your bug:
>
> > Sorry, I have never seen this one before!
> >
> > My only guess is something in the audio has gone wrong and it is very 
> > quickly sending RTP packets, like as fast it can.
> >
> > Other than operating system problems, I can't think of anything that 
> > would make a UDP write run out of buffers. Just doesn't take that 
> > long to get a packet out onto the wire as a rule!
>
> I do not know what to do.
>
> The only solution I see to solve this issue is to look with wireshark 
> if RTP packets are indeed leaving the machine very very fast (look at 
> their time); for ex. if you see 100 packets in 0.01 sec then we know 
> that the problem is indeed that the sending speed is too high.
I installed Wireshark in my Linux Mandriva 2010.2 64 bit and now I need 
to understand how to use it.
As soon as I get information about packet speed I'll let you know.


> Another idea is to check the latest (unstable) release of ekiga, 3.3.0 
> if you can...

I searched the site for 3.3.0 to understand if it's easy to install it 
but I don't found

Thank you for answer.