[Ekiga-list] colour format related problem with ekiga

[sudhish vln <sudhish vln gmail com>]

Hello,

I have recently installed gspca driver (gspcav1-20071224) for a web camera. lsusb utility gave the following result

###########################################################################
[root@localhost linux-2.6.29.4]# lsusb
Bus 004 Device 013: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 Webcam.
###########################################################################


The desktop i currently use runs linux (fedora 11 .2.6.29.4-167.fc11.x86_64).

 Installation of the web cam driver was successfull. lsmod displays the kernel objects as shown below.
#########################################################################
[root@localhost linux-2.6.29.4]# lsmod |grep gspca
gspca                 660336  0
gspca_zc3xx            49648  0
gspca_main             22768  1 gspca_zc3xx
videodev               38704  3 sn9c20x,gspca,gspca_main
########################################################################


dmesg utility gave the following result:

#########################################################################
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=0ac8, idProduct=303b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: PC Camera
usb 4-1: Manufacturer: Vimicro Corp.
usb 4-1: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
gspca: main v2.5.0 registered
gspca: probing 0ac8:303b
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe 3wr vga 1 0xe001
zc3xx: probe sensor -> 0013
zc3xx: Find Sensor MI0360. Chip revision e001
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registered
usbcore: registered new interface driver gspca
gspca driver 01.00.20 registered
###########################################################################

And last but not the least, /dev/video0 exists.

So it can be seen that there is no fault on the driver registration side or device recognition.

But when Ekiga tries to detect the device, the following error pops up.

"YOUR DRIVER DOES'NT SEEM TO SOPPORT ANY OF COLOUR FORMATS SUPPORTED BY EKIGA".

I have enclosed the complete dialogue.

I have seen that this is a problem faced by many since the year 2009. somebody should have found the solution for this.

Any help is appreciated.

Regards,

Sudhish

Attachment: ekiga.png
Description: PNG image