Re: [Ekiga-list] Can't call landlines with other provider

[Reimundo Heluani <rheluani gmail com>]

On Thu, 2009-08-13 at 18:53 +0200, yannick wrote:
> Reimundo Heluani a écrit :
> > Hello List, I am new to SIP and I just built ekiga 3.2.5 from source on
> > a LFS Linux 86x_64 2.6.29.5. I can run the echo test and it works fine,
> > but if I try to use my voipdiscount.com account, about 10 seconds after
> > dialing out it says "User not available" regardless of the phone dialed.
> > 
> > The problem is that I don't really know how to start debugging this, is
> > there a debug mode for Ekiga?
> > 
> 
> Yes, please provide us a debug output:
> http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output
> 
Allright, so I can see this line

"2009/08/13 12:28:54.066   0:10.376         CallSetup:0xf0358910 SIP
PDU is likely too large (1615 bytes) for UDP datagram."

is this related to 

http://bugzilla.gnome.org/show_bug.cgi?id=341518

and if so, my MTU on my ethernet card can be to 4000 and it still fails.
Also, the echo test still works and the log shows those lines anyways.
Finally, running from another Linux and Ekiga 3.2.0 I can call with
voipdiscount.com and the logs don't show those lines abot the PDU being
too large.

R.

> > Another issues I have (that may be completely unrelated) are
> > 
> > 1) If I check on General Settings --> Disable Network detection, then
> > the Ekiga.net account doesn't register (it says Globally not accepted) 
> > 
> 
> That is not an issue, it only means your current setup prevent
> end-to-end communication and you need a helper for that. Left it uncheck.
> 
> > 2) I have pulseaudio running on my system and I have to use the
> > "Default" (PTLIB/ALSA) sink therefore, but my card (and webcam) are
> > constantly bombarded. If I have pavucontrol open and test any sound from
> > Ekiga, the cpu goes to 99% activity and I have to kill he stream.
> > 
> 
> Does it work better without pulse audio? If so, please report a bug to
> pulse audio.
> 
> > I know I'm not giving enough information but I don't really know where
> > to begin, I you could point me in any direction to start debugging I'll
> > be thankful. 
> > 
> > I just installed ptlib-2.6.4, opal-3.6.4 but no pwlib.
> > 
> > Cheers, 
> > 
> > R.
> > 
> > _______________________________________________
> > ekiga-list mailing list
> > ekiga-list gnome org
> > http://mail.gnome.org/mailman/listinfo/ekiga-list
> > 
> > 
> 
> _______________________________________________
> ekiga-list mailing list
> ekiga-list gnome org
> http://mail.gnome.org/mailman/listinfo/ekiga-list