Re: [Ekiga-list] Could not register (Requested terminated) w/ ekiga-3.2

[Eugen Dedu <Eugen Dedu pu-pm univ-fcomte fr>]

Mounir Lamouri wrote:
> Eugen Dedu wrote:
> > Mounir Lamouri wrote:
> > > No answer since some days (and output sent a few days ago).
> > > Should I file a bug ?
> > I have not sent your output when "you arrive at home"...
> I sent it but the attached file was very large and I receive a "message
> needs to be moderated" message. I suppose it never has.
>
> You should find the log here : http://dpaste.com/25304/

Hi Mounir,

I looked at our output.

First, I see several assertion failed inside, from gmconf /apps/ekiga 
keys.  Do you know how does it happen that this key for ex. is not 
string???  What is its value?
** (ekiga:24853): CRITICAL **: entry_get_string: assertion `gmconf key 
/apps/ekiga/general/personal_data/short_status is of type 
GM_CONF_STRING' failed

Second, I think the problem is that the address you request registration 
from is private, look:
2009/04/03 18:04:03.386	  0:00.980	  subscriber:0x495b54b0	SIP	Sending 
PDU (550 bytes) to: 
rem=udp$86.64.162.35:5060,local=udp$192.168.1.62:5060,if=192.168.1.62%wlan0
REGISTER sip:ekiga.net SIP/2.0
Route: <sip:ekiga.net:5060;lr>
CSeq: 2 REGISTER
Via: SIP/2.0/UDP 
192.168.1.62:5060;branch=z9hG4bK42270903-091f-de11-8176-00112494cbef;rport

Ekiga cannot accept private addresses.  It seems the same problem was 
with Ren Min.  It is important I think to understand:
- why this happens
- how to inform the user about that <- I will think about that

Note that mee too I use a internet box (freebox, as you) and use private 
address for my machine and the freebox does NAT, however, my line is:
Via: SIP/2.0/UDP 
82.238.108.175:5060;branch=z9hG4bK8a32fd1c-2222-de11-83ec-001b639fea73;rport

so it does not put my private address, but my public one.

I notice also in your output that stun is not used.  Could you look at 
preferences, general, general settings that disable net detection is 
off?  Anyway, the problem with your setup is that all the gmconf keys 
seem unreadable (see the assertions above)!!

Before doing anything else, could you save your ekiga gmconf keys 
(/apps/ekiga) to have this "bug" reproducible?

Cheers,
Eugen