Re: [Ekiga-list] Microphone can only be opened by using a different program



I have some similar problems.

On Tue, Mar 18, 2008 at 4:32 PM,  <a stammler freenet de> wrote:
> Hi,
>
>  When Ekiga starts, my microphone sound is not received by Ekiga (as shown
>  by the meter in the Audio tab and also by the silence returned by echo
>  test calls) even though I can hear it on my loudspeakers. Both volume
>  switches are at zero and cannot be moved (they jump back to zero).

I have found that on my system, if I happen to have PulseAudio running
and try starting Ekiga, I have no sound uptill I kill PA.

Also my switches will not move, jump back, until i call
500 for a test. Then they work fine.

Also I have noticed that when I and start Ekiga and it does not come
up  and appears, from looking at the terminal, that it has not come
up, BUT if I look at the process, I find it is showing a process, but
no GUI. I then kill that process and Ekiga will then come up ok with
it's GUI.

***************snip*************************
Peace........................ed

-- 
Edward Dunagin-Dunigan-Dunnigan
Bozeman, MT 59718
mobile 406-570-0992
Landline 406-556-7282
VOIP:sip:edunagin 69 144 82 213:5063;transport=udp
http://doas.montanalinux.org


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]