Re: [Ekiga-list] Timeout? Call out OK call in from Diamon unseen or broken

[ael <law_ence dev ntlworld com>]

Philippe Laliberte wrote:
> Hello,
> 
> I am running into a little problem. I did dig into the wiki but to no
> avail.
> 
> Set-up:
> 
> Fedora 7.
> kernel-2.6.22.9
> Firewall disabled. selinux disabled
> Ekiga 2.0.11
> 
> Router Modem ADSL SpeedTouch 780
> Firewall disabled (once I get Ekiga working I'll test what I can close)
> VoIp turned off
> 
> Modem routing Configuration
> 
> Protocol    Port Range    Translate To ...    Trigger Protocol   
> Trigger Port   Any            5000 - 5100    5000 - 5100       
> -                               -
> UDP           3479 - 3479    3479 - 3479    UDP                         
> 3479
> UDP           3478 - 3479    3478 - 3479    UDP                         
> 3478

I can't quite decode the above. If you trigger on 3478 (UDP) and then
open 5000 -5100 (UDP) then it should be ok. I am not sure that is what
you have above is it? I can't make out the first line ending in
5000-5100: how does that relate to the two following lines?

ael