Re: [Ekiga-list] Timeout? Call out OK call in from Diamon unseen or broken

[Damien Sandras <dsandras seconix com>]

Hi,

Le dimanche 21 octobre 2007 �9:20 +0100, Philippe Laliberte a �it :
> Hello,
> 
> I am running into a little problem. I did dig into the wiki but to no avail.
> 
> Set-up:
> 
> Fedora 7.
> kernel-2.6.22.9
> Firewall disabled. selinux disabled
> Ekiga 2.0.11
> 
> Router Modem ADSL SpeedTouch 780
> Firewall disabled (once I get Ekiga working I'll test what I can close)
> VoIp turned off
> 
> Modem routing Configuration
> 
> Protocol    Port Range    Translate To ...    Trigger Protocol    
> Trigger Port   
> Any            5000 - 5100    5000 - 5100        -                      
>           -
> UDP           3479 - 3479    3479 - 3479    UDP                        
>    3479
> UDP           3478 - 3479    3478 - 3479    UDP                        
>    3478
> 
> Nat detection always Symetric.
> 

That's the cause of your problem.

Are you sure port are correctly forwarded ?
Are you sure your router does not have SIP conntracking (in which case
you could disable STUN and port forwarding alltogether).
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   NOVACOM         : http://www.novacom.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras ekiga net