Re: [Ekiga-devel-list] alien registrar problem

[Damien Sandras <dsandras seconix com>]

Le mardi 23 juin 2009 à 16:15 +0200, Michael Rickmann a écrit :
> Am Dienstag, den 23.06.2009, 15:02 +0200 schrieb Damien Sandras:
> > Le mardi 23 juin 2009 à 14:39 +0200, Michael Rickmann a écrit :
> > > I can not convince recent git revisions of ekiga to register with my
> > > phone provider (1und1.de). I get an "could not register (Forbidden,
> > > please check that username and password are correct)" answer, same error
> > > on Linux and Windows. I tested from behind a FritzBox as a NAT router:
> > > git-Linux no, git-WinXP no, git-Win7RC no, 3.02-WinXP yes. On a
> > > different computer with an official IP: git-Linux no. For attached d4
> > > log I started up Ekiga which was registering to ekiga.net. Then I
> > > manually enabled my other account sip.1und1.de resulting in above error.
> > > Then I shut down again. This behaviour seems not related to the number
> > > of accounts but to, ekiga.net or not.
> > > Additionally, Ekiga crashes on Windows only, when I delete an account.
> > > There may be a connection between the two errors and the difference in
> > > crashing may be caused by the difference in gmconf storing.
> > > The registering problem may be related to what thomas schorp reported in
> > > http://mail.gnome.org/archives/ekiga-devel-list/2009-June/msg00036.html .
> > > At that time I was still happy with my Windows version connecting to
> > > ekiga.net. Does ekiga.net not require a password? Can I register with
> > > any string? That seems to be the case.
> > 
> > It tells:
> > SIP/2.0 403 Keine RFC1918-IPs erlaubt
> > 
> > That seems to be the reason. Not sure why. You should try a capture with
> > only that account active, for clarity.
> > -- 
> snip
> 
> Yes that is the only German string in there saying no RFC1918-IPs
> allowed. I attach the 1und1only log. Admittedly network setup of my
> computer here is a bit complicated. It has two interfaces, one to the
> free internet and one to our lab network where also the nameservers
> are. 
> 
> Kernel-IP-Routentabelle
> Ziel            Router          Genmask         Flags Metric Ref    Use
> Iface
> 192.168.21.0    *               255.255.255.0   U     0      0        0
> eth1
> link-local      *               255.255.0.0     U     1000   0        0
> eth1
> localnet        *               255.255.0.0     U     0      0        0
> eth0
> default         gr-physio1-145. 0.0.0.0         UG    100    0        0
> eth0
> 
> I checked ekiga.net requires a password. However, Ekiga seems to pick up
> a password change only the next time it is started.
> I will report the d4 log from home this evening.

What happens is that your contact field has 2 IP addresses :
- 1 public IP
- 1 private IP (with lower priority)

The remote SER is misconfigured and rejects the packets because one of
the IPs is private while the public one is reachable. You should contact
them.

Btw, is that a recent trunk ? Something else seems to be broken (without
affecting the failure you see or being related to it).
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   Be IP           : http://www.beip.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras ekiga net