Re: [Ekiga-devel-list] Camera fails after a call.

[Vehyla <vehyla gmail com>]

I have a whole lot in dmesg actually.  I will include an attachment but here
is all the different errors clipped out. 

usb 1-5: reset high speed USB device using address 2
uvcvideo: Failed to resubmit video URB (-19).
uvcvideo: Failed to query (130) UVC control 1 (unit 0) : -32 (exp. 26).
uvcvideo: Failed to query (1) UVC control 2 (unit 0) : -32 (exp. 26).
usb 1-5: control timeout on ep0in
usb 1-5: control timeout on ep0out
uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
2:3:3: cannot set freq 16000 to ep 0x86
uvcvideo: Failed to resubmit video URB (-19).
uvcvideo: Failed to query (131) UVC control 1 (unit 0) : -32 (exp. 26).
uvcvideo: Failed to query (135) UVC control 2 (unit 2) : -110 (exp. 2).



Damien Sandras wrote:
> 
> Le mardi 07 août 2007 à 21:48 +0200, Damien Sandras a écrit :
>> Le lundi 06 août 2007 à 11:50 -0700, Vehyla a écrit :
>> > I am currently working to get Ekiga to work on RHEL 4.5 x86_64.  I have
>> a
>> > Quickcam Pro 5000 and I'm using the uvcvideo drivers from
>> > http://linux-uvc.berlios.de/  The camera seems to start up fine and I
>> can
>> > make a call to another machine without problems.  However after I
>> disconnect
>> > from my call the camera usually doesn't come back and it fails with one
>> of
>> > two errors listed below:
>> > 
>> > Error while setting the frame size   (Most common error)
>> > 
>> > Your driver doesn't seem to support any of the color formats supported
>> by
>> > Ekiga.
>> >  Please check your kernel driver documentation in order to determine
>> which
>> > Palette is supported.
>> > 
>> > If I close ekiga (which also never closes I always have to hit force
>> quit or
>> > ctl-C, but maybe that should be a differnt post) I can start it back up
>> and
>> > everything seems to work fine for another phone call.  I'm including a
>> > debug6 for my session when the camera ends with the "Error while
>> setting the
>> > frame size"  Please let me know if anyone has heard of this or has any
>> > suggestions.  Also let me know if I did not give sufficient information
>> to
>> > help debug the problem.  Thanks.
>> > http://www.nabble.com/file/p12020791/ekiga.recieve ekiga.recieve 
>> 
>> Luc Saillard tells me that it could be a bug in the camera or in the
>> driver.
>> 
>> If you plug the camera and unplug it, does it work again ?
>> 
>> Luc told me that he has seen a patch to fix that problem but it never
>> got applied :-/
>> 
>> See :
>> <luc> damien: the first logitech fusion has the bug too, i've seen some
>> patch to try to fix the bug ... but i don't know if it was applied
>> <luc> damien: and don't plug anything (like mouse, keyboard, usb1.1
>> device) on the same usb bus
>> <luc> else the camera is set in usb1.1 ans only some resolution are
>> available (at least for the logitech fusion)
> 
> Also, do you have a dmesg log when the problem occurs ?
> -- 
>  _     Damien Sandras
> (o-      
> //\    Ekiga Softphone : http://www.ekiga.org/
> v_/_   NOVACOM         : http://www.novacom.be/
>        FOSDEM          : http://www.fosdem.org/
>        SIP Phone       : sip:dsandras ekiga net
>                        
> 
> _______________________________________________
> Ekiga-devel-list mailing list
> Ekiga-devel-list gnome org
> http://mail.gnome.org/mailman/listinfo/ekiga-devel-list
> 
http://www.nabble.com/file/p12042071/dmesg.out dmesg.out 
http://www.nabble.com/file/p12042071/dmesg.out dmesg.out 
-- 
View this message in context: http://www.nabble.com/Camera-fails-after-a-call.-tf4225653.html#a12042071
Sent from the Ekiga Dev mailing list archive at Nabble.com.