Re: Problems compiling.

["Jaap A. Haitsma" <jaap haitsma org>]

You should run autogen.sh as a normal user

Just check cheese out with your normal account and run

./autogen.sh
make
sudo make install

On Feb 9, 2008 11:39 PM, Leon Moctezuma <densedev gmail com> wrote:
> probably you had some reason, I had it on a Fat32 patition, but i now I get
> the  following...
>
> >
> > $ ./autogen.sh
> > /usr/bin/gnome-autogen.sh
> > checking for autoconf >= 2.57...
> >   testing autoconf2.50... not found.
> >   testing autoconf... chmod: Beim Setzen der Zugriffsrechte für
> „conf9736.sh": Operation not permitted
> >
> >
> >
> > found 2.61
> > checking for automake >= 1.7...
> >   testing automake-1.10... not found.
> >   testing automake-1.9... found 1.9.6
> > checking for libtool >= 1.5...
> >   testing libtoolize... found 1.5.24
> > checking for glib-gettext >= 2.2.0...
> >   testing glib-gettextize... found 2.14.1
> > checking for intltool >= 0.35.0...
> >   testing intltoolize... found 0.36.2
> > checking for pkg-config >= 0.16.0...
> >   testing pkg-config... found 0.22
> > checking for gnome-doc-utils >= 0.4.2...
> >   testing gnome-doc-prepare... found 0.12.0
> > checking for gnome-common >= 2.3.0...
> >   testing gnome-doc-common... found 2.20.0
> > Checking for required M4 macros...
> > Checking for forbidden M4 macros...
> > **Warning**: I am going to run `configure' with no arguments.
> > If you wish to pass any to it, please specify them on the
> > `./autogen.sh' command line.
> >
> > Processing ./configure.ac
> > Running libtoolize...
> > You should add the contents of `/usr/share/aclocal/libtool.m4' to
> `aclocal.m4'.
> > cp: Erhalten der Zeiten für „config.guess": Operation not permitted
> > libtoolize: cannot copy `/usr/share/libtool/config.guess' to
> `config.guess'
> > cp: Erhalten der Zeiten für „config.sub": Operation not permitted
> > libtoolize: cannot copy `/usr/share/libtool/config.sub' to `config.sub'
> > cp: Erhalten der Zeiten für „ltmain.sh": Operation not permitted
> > libtoolize: cannot copy `/usr/share/libtool/ltmain.sh' to `ltmain.sh'
> > leonox leonox:~/proyectos/trunk$ sudo ./autogen.sh
> > [sudo] password for leonox:
> > Sorry, try again.
> > [sudo] password for leonox:
> >
> > /usr/bin/gnome-autogen.sh
> > checking for autoconf >= 2.57...
> >   testing autoconf2.50... not found.
> >   testing autoconf... found 2.61
> >
> > checking for automake >= 1.7...
> >   testing automake-1.10... not found.
> >   testing automake-1.9... found 1.9.6
> > checking for libtool >= 1.5...
> >   testing libtoolize... found 1.5.24
> > checking for glib-gettext >= 2.2.0...
> >   testing glib-gettextize... found 2.14.1
> > checking for intltool >= 0.35.0...
> >   testing intltoolize... found 0.36.2
> > checking for pkg-config >= 0.16.0...
> >   testing pkg-config... found 0.22
> > checking for gnome-doc-utils >= 0.4.2...
> >   testing gnome-doc-prepare... found 0.12.0
> > checking for gnome-common >= 2.3.0...
> >   testing gnome-doc-common... found 2.20.0
> > Checking for required M4 macros...
> > Checking for forbidden M4 macros...
> > **Warning**: I am going to run `configure' with no arguments.
> > If you wish to pass any to it, please specify them on the
> > `./autogen.sh' command line.
> >
> > Processing ./configure.ac
> > Running libtoolize...
> > You should add the contents of `/usr/share/aclocal/libtool.m4' to
> `aclocal.m4'.
> > cp: konnte den Eigentümer für „config.guess" nicht erhalten: Operation not
> permitted
> >
> > libtoolize: cannot copy `/usr/share/libtool/config.guess' to
> `config.guess'
> > cp: konnte den Eigentümer für „config.sub" nicht erhalten: Operation not
> permitted
> >
> > libtoolize: cannot copy `/usr/share/libtool/config.sub' to `config.sub'
> > cp: konnte den Eigentümer für „ltmain.sh" nicht erhalten: Operation not
> permitted
> > libtoolize: cannot copy `/usr/share/libtool/ltmain.sh' to `ltmain.sh'
> > leonox leonox:~/proyectos/trunk$ cd  ..
> > leonox leonox:~/proyectos$ cd ..
> > leonox leonox:~$ cd truk
> > bash: cd: truk: No such file or directory
> > leonox leonox:~$ cd trunk
> > leonox leonox:~/trunk$ sudo ./autogen.sh
> >
> > /usr/bin/gnome-autogen.sh
> > checking for autoconf >= 2.57...
> >   testing autoconf2.50... not found.
> >   testing autoconf... found 2.61
> >
> > checking for automake >= 1.7...
> >   testing automake-1.10... not found.
> >   testing automake-1.9... found 1.9.6
> > checking for libtool >= 1.5...
> >   testing libtoolize... found 1.5.24
> > checking for glib-gettext >= 2.2.0...
> >   testing glib-gettextize... found 2.14.1
> > checking for intltool >= 0.35.0...
> >   testing intltoolize... found 0.36.2
> > checking for pkg-config >= 0.16.0...
> >   testing pkg-config... found 0.22
> > checking for gnome-doc-utils >= 0.4.2...
> >   testing gnome-doc-prepare... found 0.12.0
> > checking for gnome-common >= 2.3.0...
> >   testing gnome-doc-common... found 2.20.0
> > Checking for required M4 macros...
> > Checking for forbidden M4 macros...
> > **Warning**: I am going to run `configure' with no arguments.
> > If you wish to pass any to it, please specify them on the
> > `./autogen.sh' command line.
> >
> > Processing ./configure.ac
> > Running libtoolize...
> > You should add the contents of `/usr/share/aclocal/libtool.m4' to
> `aclocal.m4'.
> > Running glib-gettextize... Ignore non-fatal messages.
> > Copying file mkinstalldirs
> > Copying file po/Makefile.in.in
> >
> > Please add the files
> >   codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
> >   progtest.m4
> > from the /aclocal directory to your autoconf macro directory
> > or directly to your aclocal.m4 file.
> > You will also need config.guess and config.sub, which you can get from
> > ftp://ftp.gnu.org/pub/gnu/config/.
> >
> > Running intltoolize...
> > Running gnome-doc-common...
> > Running gnome-doc-prepare...
> > You should add the contents of '/usr/share/aclocal/gnome-doc-utils.m4' to
> 'aclocal.m4'.
> > Running aclocal-1.9...
> > aclocal: couldn't open directory `/root/gnome-pilot/macros': No such file
> or directory
> >
> >
>
>
> On Feb 9, 2008 11:06 PM, Jaap A. Haitsma <jaap haitsma org> wrote:
>
> >
> >
> >
> > On Feb 9, 2008 10:59 PM, Leon Moctezuma <densedev gmail com> wrote:
> > > Hi I'm Leon,
> > >
> > > Today I downloaded the project  from the Ubuntu's repository and really
> > > liked  the
> > > project, unfortunately the part of video recording hangs my computer, so
> I
> > > wanted
> > > to check the svn version, hopping that the problem is already solved, if
> > > it's  not
> > >  the case  I'm disposed to help you finding it. I have  seen that you
> have
> > > some ideas
> > > on using OpenGL, maybe I can help in that area.
> > >
> > > I'm trying to compile but  I'm having some troubles...
> > >
> > > > $ ./autogen.sh
> > > > /usr/bin/gnome-autogen.sh
> > > > checking for autoconf >= 2.57...
> > > >   testing autoconf2.50... not found.
> > > >   testing autoconf... chmod: Beim Setzen der Zugriffsrechte für
> > > „conf9109.sh": Operation not permitted
> > > > found 2.61
> > > > checking for automake >= 1.7...
> > > >   testing automake-1.10... not found.
> > > >   testing automake-1.9... found 1.9.6
> > > > checking for libtool >= 1.5...
> > > >   testing libtoolize... found 1.5.24
> > > > checking for glib-gettext >= 2.2.0...
> > > >   testing glib-gettextize... found 2.14.1
> > > > checking for intltool >= 0.35.0...
> > > >   testing intltoolize... found 0.36.2
> > > > checking for pkg-config >= 0.16.0...
> > > >   testing pkg-config... found 0.22
> > > > checking for gnome-doc-utils >= 0.4.2...
> > > >   testing gnome-doc-prepare... found 0.12.0
> > > > checking for gnome-common >= 2.3.0...
> > > >   testing gnome-doc-common... found 2.20.0
> > > > Checking for required M4 macros...
> > > > Checking for forbidden M4 macros...
> > > > **Warning**: I am going to run `configure' with no arguments.
> > > > If you wish to pass any to it, please specify them on the
> > > > `./autogen.sh' command line.
> > > >
> > > > Processing ./configure.ac
> > > > Running libtoolize...
> > > > You should add the contents of `/usr/share/aclocal/libtool.m4' to
> > > `aclocal.m4'.
> > > > cp: Erhalten der Zeiten für „config.guess": Operation not permitted
> > > > libtoolize: cannot copy `/usr/share/libtool/config.guess' to
> > > `config.guess'
> > > > cp: Erhalten der Zeiten für „config.sub": Operation not permitted
> > > > libtoolize: cannot copy `/usr/share/libtool/config.sub' to
> `config.sub'
> > > > cp: Erhalten der Zeiten für „ltmain.sh": Operation not permitted
> > > >
> >
> > It works fine here on Ubuntu.
> > I see that copying of some files fails. Can it be that the directory
> > you checked the code out is not writeable?
> >
> > Jaap
> >
>
>