Re: [orca-list] Pluginsystem for Orca using libpeas



Howdy,
i took a look at your issues here all in order:
1. review keys not working: i dont see this here. i can move the review to an button and simulate an right or leftclick.
what i did: open orca settings Orca + space, review (KP_4 and KP_6) to "ok" button, press multiply to klick on it. worked for me. Orca simulated the klick, closed the preferences dialog and reloads the settings.

2. you are right, i deleted some .ui files because those are not needed anymore. but forgott about that the translation is still refering to. i usualy test without remove my orca setup. so the file still exist in my filesystem. so i dont got this error. pull again, make should work now. before i remove the file i have to change the translations as well.

3. hmm sadly i dont own an braille device to verify, but i do just call the same function as it was called before. so i wonder why the braille behaves different. maybe can you remove your installed orca from filesystem and just reinstall it using make install? maybe some python caching is behaving bad here.

cheers chrys

Am 11.06.21 um 17:48 schrieb Patrick ZAJDA:

I noticed a different behavior about brail: for date and time plugin for example, I would expect the message not to stay displayed.

Braille message are displayed for a specific delay.

Or is it the expected behavior for the moment to keep the message displayed until something else is spoken?


Le 11/06/2021 à 17:40, Patrick ZAJDA a écrit :

Hi again Chrys,


Thanks for your answer.

Another thing: with the latest commit I cannot do "make":

Making all in po
make[1] : on entre dans le répertoire « /home/pzajda/git/orca-plugin/po »
make orca.pot-update
make[2] : on entre dans le répertoire « /home/pzajda/git/orca-plugin/po »
make[2]: ***  Aucune règle pour fabriquer la cible « ../src/orca/orca-setup.ui », nécessaire pour « orca.pot-update ». Arrêt.
make[2] : on quitte le répertoire « /home/pzajda/git/orca-plugin/po »
make[1]: *** [Makefile:322: orca.pot] Error 2
make[1] : on quitte le répertoire « /home/pzajda/git/orca-plugin/po »
make: *** [Makefile:471: all-recursive] Error 1


I even tried to clone the repo again in the case I would have made a mistake.


Best regards.


Le 11/06/2021 à 16:52, Linux A11y a écrit :
Howdy Patrick,

Sounds like i missed something somewhere. I m currently shopping but will take a look as soon as i stay back at home and find some time. I let you know.

Thanks for testing and reporting!

Von meinem iPhone gesendet

Am 11.06.2021 um 15:20 schrieb Patrick ZAJDA <patrick zajda fr>:

Hello Chrys and all,


Since I use Orca with the plugin system, I cannot use Orca mouse functions as joining the mouse cursor to current position nor left/right click, I always have the "unable to get position" message.


Is there something I missed?


Best regards,


Patrick


Le 11/06/2021 à 12:49, chrys a écrit :
Howdy,

cool, that you get it installed :). let me know if you find any issues in orca with plugin system git.
great that is getting tested, thanks!

Am 11.06.21 um 12:39 schrieb Patrick ZAJDA:
Hello,


Right, I've just done it on Debian Buster.

I only had to install the backports version of meson after installing all dependencies of libpeas (sudo apt build-dep libpeas) and I also installed the python3 versions of libpeas dependencies then I followed these instructions: https://www.linuxfromscratch.org/blfs/view/svn/gnome/libpeas.html


Now I can run orca with the plugin system.

It is not the cleanest way to proceed as I overwritten installed binaries by Debian but I have not encountered any issue.


Hop this could help some other people.


Le 10/06/2021 à 18:56, Didier Spaier via orca-list a écrit :
Hi,

I would go for: 3. Build libpeas from source.

Make a package for it just took 40 seconds on my laptop.

I'll leave for others to tell you how to do that for Ubuntu.

Cheers,
Didier


Le 10/06/2021 à 18:44, Geoff Shang a écrit :
On Thu, 10 Jun 2021, chrys wrote:

if this commit is true, you need at least version 1.26 of libpeas from January 2020.
Debian Bullseye (the next release) has libpeas 1.28.

Unfortunately, it doesn't appear to be in buster-backports.

I looked at the version in Bullseye. It actually has fewer dependencies than the version in Buster, and many of them are the same version or are covered by packages in Buster.

However, it depends on libpython3.9, and as the version of Python in Buster is 3.7.3 and one of the dependencies for libpython3.9 is libc6 >= 2.29 which is higher than the version in Buster, trying to pull in libpeas from Bullseye will result in an upgrade of libc6 which will suck in a whole lot of other packages.

As I see it, your choices are:

1.  Upgrade to Bullseye.  Bullseye is currently frozen and is likely to release soon, so this might be safe enough to do. I'm going to do this on one of my systems for a similar reason - I need Python > 3.7.  You should read the release notes first though as there may be important changes (you should do this anyway).

2.  Pull in libpeas from Bullseye anyway and accept all the upgraded packages.  This will result in a partially upgraded system which is probably not a good idea, especially given that lib6 will be upgraded.

3.  Build libpeas from source. I have no idea at all how involved this is and it may well be more work than it's worth, particularly given the dependencies.

4.  Wait for Bullseye to release.

HTH,
Geoff.
_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
-- 
Patrick ZAJDA
_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
--
Patrick ZAJDA

_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Orca wiki: https://wiki.gnome.org/Projects/Orca
Orca documentation: https://help.gnome.org/users/orca/stable/
GNOME Universal Access guide: https://help.gnome.org/users/gnome-help/stable/a11y.html
--
Patrick ZAJDA




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]