Re: [orca-list] orca remane quite on popup windo

[Joanmarie Diggs <jdiggs igalia com>]

Did you assign a keybinding to "cycle debug level at run time"? There 
are instructions on the wiki page to do that.

When you start Orca with debugging enabled (orca --debug), you can use 
the "cycle debug level" keybinding to enable "all" debugging.

When you have enabled all debugging, then you should perform the steps 
to reproduce the problem.

Once you have reproduced the problem, you should restart orca. When you 
restart Orca you do not want to use --debug.

HTH.
--joanie

On 4/28/20 07:03, bittukumar jaiswal via orca-list wrote:
> some how I am not able to understand how to give that debug file.
> I have assigned key for debug : orca+delete.
> Created folder by pressing Alt+F2: orca --debug
> that much is fine but after that whatever      steps are there I am
> not able to understand how to do.
> Kindly help...
>
>
> On 4/27/20, Joanmarie Diggs <jdiggs igalia com> wrote:
> > Thanks for the clarifications. But I'm afraid it's not enough
> > information for me to do anything in Orca. If you are able to capture a
> > full debug.out for me, I might be able to get a better understanding of
> > what, if anything, I can do in Orca to solve this problem for you.
> >
> > Information on how to capture a full debug.out can be obtained here:
> > https://wiki.gnome.org/Projects/Orca/Debugging
> >
> > --joanie
> >
> > On 4/27/20 12:33, bittukumar jaiswal wrote:
> > > Sorry list I forgot to mention one more thing that,
> > > Screen reader is not speaking anything if I plug earphone not in my ear
> > > phone or on my laptop speakers.
> > > If I press any command any ki or remain silent aur it might be the
> > > another issue but what I understand that I am not able to hear any sound
> > > after plugging headphone to my laptop till  I select the audio device
> > > After selecting the device as I mentioned in my my last email that I
> > > press tab key 2 times and hit enter to select my headphone as a sound
> > > device. I am able to hear all the sounds.
> > > I am extremely sorry for my earlier mistake and confusion.
> > > Hope that helps.
> > >
> > >
> > > On Mon, Apr 27, 2020, 9:56 PM bittukumar jaiswal
> > > <bittukjaiswal gmail com <mailto:bittukjaiswal gmail com>> wrote:
> > >
> > >      I think that screen reader is not able to identify the popup because
> > >      when I am using Arrow keys to navigate within the list or if I use
> > >      tab key to navigate still screen reader do not read anything it
> > >      remains silent.
> > >      Hope that helps
> > >
> > >
> > >      On Mon, Apr 27, 2020, 9:13 PM Joanmarie Diggs <jdiggs igalia com
> > >      <mailto:jdiggs igalia com>> wrote:
> > >
> > >          I'm afraid I don't understand your point. Looking at my debug.out
> > >          captured when reproducing the steps you described, I noticed
> > >          that Orca
> > >          was indeed speaking the popup window. But I didn't hear Orca say
> > >          anything. So I tried again putting on my headphones first and
> > > then
> > >          plugging them in to my computer. Orca started speaking the popup
> > >          window
> > >          through the headphones. Thus at least from what I'm seeing,
> > >          there is no
> > >          Orca bug. If you are telling me that Orca isn't doing the same
> > >          thing for
> > >          you, then it would be extremely helpful to have a full debug.out
> > >          from
> > >          you. Your debug output would tell me if:
> > >
> > >          1. Orca is speaking the popup, but you're just not hearing it.
> > >          2. Orca is seeing the popup but choosing to ignore it.
> > >          3. Orca has no idea the popup is even there.
> > >
> > >          Thanks!
> > >          --joanie
> > >
> > >          On 4/27/20 11:27, bittukumar jaiswal via orca-list wrote:
> > >           > but i am able to select the device.
> > >           > how?
> > >           > After plugging the yearphone, I press Tab key 2 time and hit
> > >          enter.
> > >           > success.
> > >           >
> > >           > best regards
> > >           > Bittukumar Jaiswal
> > >           >
> > >           >
> > >           > On 4/27/20, Joanmarie Diggs <jdiggs igalia com
> > >          <mailto:jdiggs igalia com>> wrote:
> > >           >> Actually, Orca is presenting the dialog to me, but it does
> > >          so in the
> > >           >> device which was just plugged in rather than the speakers
> > >          which were
> > >           >> being used. If Orca is not speaking anywhere, please send me
> > >          a full
> > >           >> debug.out.
> > >           >>
> > >           >> Thanks again!
> > >           >> --joanie
> > >           >>
> > >           >> On 4/27/20 11:16, Joanmarie Diggs wrote:
> > >           >>> Confirmed. Will take a look. Thanks!
> > >           >>> --joanie
> > >           >>>
> > >           >>> On 4/27/20 11:12, bittukumar jaiswal via orca-list wrote:
> > >           >>>> hi list!
> > >           >>>> when I am plugging my yearphone to my laptop system shows
> > >          a dilog box
> > >           >>>> to select the audio device but Orca do not speak anything.
> > >           >>>> using:
> > >           >>>> ubuntu 20.04 LTS
> > >           >>>> Gnome desktop
> > >           >>>>
> > >           >>>>
> > >           >>>
> > >           >>
> > >           >>
> > >           >
> > >           >