GNOME.org
 

Re: [orca-list] Orca silent

Hi,
Yeah, I found one more bug - the speech often stops in Firefox,
perticulary after some links, which doesn't happen with speech-dispatcher.
But this case is another point in favour of a build-in ESpeak driver in
Orca - you have speech-dispatcher, but it doesn't work for some reason -
what would you do?
Use speakup? Using another screen reader to restore speech in Orca,
really? You may not even have a working speakup, if at all.
Using SSH from another machine? Even worst How many people have several
machines in their disposal - I don't.
Crying for help? Sorry, I prefer to be independent, and that's one of
the reasons I use Linux those days.

So the solution is easy - having drivers for several speech systems,
picking the first that works and switching to another driver whenever
the current one fails.
Thank you Peter for working on this - don't give up.

Best wishes,
Zahari

На 27.08.2015 в 10:36, Peter Vágner написа:

Hello,
Direct eSpeak support for orca has some performance issues, I don't
think that is viable for day to day use.
In order to fix your locale issues, you might like to try regenerating
the locale data.

In your favorite text editor open a file
/etc/locale.gen
If it's missing then try to reinstall glibc
sudo pacman -S glibc
If this does not work, then try to update your system.
If it still does not work try
sudo pacman -Sy glibc
Finally if you have got the file
/etc/locale.gen
showing in your text editor of choice uncoming the locales you wish to
generate respective data for. I suggest uncommenting the line
#en_US.UTF-8 UTF-8
If you need other locales you can also uncomment them e.g.
#en_GB.UTF-8 UTF-8
Once uncommented save the file and run the following command in your
terminal
locale-gen

Now try to repeat tests with speech-dispatcher as suggested by Storm
earlier.

If it does not work, then we need to work out if you are using
pulseaudio or alsa and try to diagnose what's going on here.
Recently we had a conversation on getting kali linux to play sounds with
Don Raikes. I think I have tried to explain a lot of alsa vs pulseaudio
stuff in there. You may like to check that discussion.

If it still does not work for you after doing and checking all this
please ask, we'll try to come up with more possible solutions.

Greetings

Peter

On 27.08.2015 at 04:03 Storm Dragon wrote:

Hi,
I haven't seen that particular error with speech-dispatcher before. If
it is vital that you get Orca up and running before any other solution
can be found, you could try installing the orca version with built in
espeak support. If you would like to do so:
git clone https://github.com/pvagner/orca
cd orca
./autogen.sh --prefix=/usr --sysconfdir=/etc --localstatedir=/var
make
sudo make install
I'm not sure how to pick espeak from the list without having speech,
maybe Peter can help out with that. If there is a way to do it that
is. Maybe when the direct espeak code gets added, it will be included
in the orca -t options so it will be possible to select it from the
CLI. Sorry I can't do any better than this, but maybe it will be
enough to get you up and running.
HTH
Storm
On Wed, Aug 26, 2015 at 09:48:33PM -0400, Al Sten-Clanton wrote:

Hi, Storm, and thanks for the suggestions.  I'm sorry to say that
trying either spd-say "hello" or the command speech-dispatcher gives me

setlocale: No such file or directory

I installed speech-dispatcher-git and got the same thing.  (I had to
use this Windows machine to get the link." I think there's a man page
for setlocale, but I couldn't figure out what it had to do with
speech-dispatcher.  I certainly couldn't figure out how any relevant
file or directory by that name got removed or where it's supposed to be.

Anybody have any ideas?

Al

On 8/26/2015 7:46 PM, Storm Dragon wrote:

Howdy,
Did you try:
spd-say "hello"
Does it speak?
If not, try:
killall -9g speech-dispatcher && speech-dispatcher
then repeat the above step again:
spd-say "hello"
If that still doesn't speak, try upgrading to speech-dispatcher from
git
available in the AUR. Hopefully, when the espeak code gets added, loss
of speech will become much more rare.
HTH
Storm
On Wed, Aug 26, 2015 at 06:40:40PM -0400, Al Sten-Clanton wrote:

Greetings!

I didn't use my Linux machine for a few days.  Today, I find that Orca
doesn't speak.  It is running, according to the ps command. Sound is
fine, as shown by using Firefox to get to an online radio station.  I
have used versions 3.17.90pre, 3.16.2, and 3.17.91pre, and have
rebooted for each.  The super-alt-s keystroke has alternately shown me
that it was running and that it was not.  I have also tried Orca-s
several times.  It seems, therefore, that everything I've used is
working except Orca's speech output.

I'm using Arch.  I ran an update today, after finding this problem.  I
think I did one last week, but don't recall whether I used Orca
afterwards or simply shut down, so can't say for sure that that update
didn't somehow cause the problem.

I'll be grateful for any help.

Al
_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Visit http://live.gnome.org/Orca for more information on Orca.
The manual is at
http://library.gnome.org/users/gnome-access-guide/nightly/ats-2.html
The FAQ is at http://live.gnome.org/Orca/FrequentlyAskedQuestions
Log bugs and feature requests at http://bugzilla.gnome.org
Find out how to help at http://live.gnome.org/Orca/HowCanIHelp




_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Visit http://live.gnome.org/Orca for more information on Orca.
The manual is at
http://library.gnome.org/users/gnome-access-guide/nightly/ats-2.html
The FAQ is at http://live.gnome.org/Orca/FrequentlyAskedQuestions
Log bugs and feature requests at http://bugzilla.gnome.org
Find out how to help at http://live.gnome.org/Orca/HowCanIHelp





_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Visit http://live.gnome.org/Orca for more information on Orca.
The manual is at
http://library.gnome.org/users/gnome-access-guide/nightly/ats-2.html
The FAQ is at http://live.gnome.org/Orca/FrequentlyAskedQuestions
Log bugs and feature requests at http://bugzilla.gnome.org
Find out how to help at http://live.gnome.org/Orca/HowCanIHelp





_______________________________________________
orca-list mailing list
orca-list gnome org
https://mail.gnome.org/mailman/listinfo/orca-list
Visit http://live.gnome.org/Orca for more information on Orca.
The manual is at http://library.gnome.org/users/gnome-access-guide/nightly/ats-2.html
The FAQ is at http://live.gnome.org/Orca/FrequentlyAskedQuestions
Log bugs and feature requests at http://bugzilla.gnome.org
Find out how to help at http://live.gnome.org/Orca/HowCanIHelp
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]