Re: [orca-list] Need Orca installation tip/guidelines
- From: ashis v purbhoo exxonmobil com
- To: DON RAIKES ORACLE COM
- Cc: William walker sun com, orca-list gnome org
- Subject: Re: [orca-list] Need Orca installation tip/guidelines
- Date: Mon, 19 May 2008 13:57:55 -0500
Don/William,
I'm I headed down the write path on the software? What are the Braille
input devices requirements? Should we initiate on 32-bit or 64-bit?
In general, what kind of work effort are we looking at?
Regards,
Ashis Purbhoo
BLI / Technical Systems / Engineering
ExxonMobil GSC - Information Technology
Office: 713.431.4875, Fax: 713.431.7911
GSC-GW3-504B
ashis v purbhoo exxonmobil com
This communication may contain privileged or other confidential
information. If you are not the intended recipient, or believe that you may
have received this communication in error, please reply to the sender
indicating that and delete the copy you received. In addition, you should
not print, copy, retransmit, disseminate, or otherwise use the information
contained in this communication. Thank You.
DON RAIKES ORA
CLE.COM
To
ashis v purbhoo exxonmobil com,
05/19/08 01:37 orca-list gnome org,
PM William walker sun com
cc
Subject
RE: [orca-list] Need Orca
installation tip/guidelines
Ashis,
I have been working on a similar project only on an i386 machine.
It is not a pretty picture at all.
The overall build envionment on rhel5 is not quite updated enough to be
able to just build gnome and go.
I have tried using both garnome 2.22.1 and the latest jhbuild withot
success.
-----Original Message-----
From: ashis v purbhoo exxonmobil com
[mailto:ashis v purbhoo exxonmobil com]
Sent: Monday, May 19, 2008 10:56 AM
To: orca-list gnome org; William walker sun com
Subject: [orca-list] Need Orca installation tip/guidelines
William/Orca Project,
You've mostly likely been in contact with Louis J. Maher.
I'm working with him to install Orac on a RHEL5 machine and needed to
determine what are going to be the steps/software/etc. that is going to be
required to get this set-up. I'm looking to get an overall picture of what
is going to be involved & how things work. A big request, but I need an
understanding of building and interactions of how this works. In addition,
the Braille device, what are the dependancies on building/compiling to the
specific Braille device?
Here is what I have so far:
RHEL 5.0 (64-bit)
GNOME v2.22 or v2.23 w/ Orca Screen Reader v2.22 or v.2.23
BrITTY v3.8 or better
Java Access Bridge (JABG) v1.5
Java v6 to build/compile JABG
Common Build Environment JDS CBE v1.6
ATK v2.0, GAIL v1.8.11, AT-SPI v1.7.7 will need to compiled & installed
Thanks.
Regards,
Ashis Purbhoo
BLI / Technical Systems / Engineering
ExxonMobil GSC - Information Technology
Office: 713.431.4875, Fax: 713.431.7911
GSC-GW3-504B
ashis v purbhoo exxonmobil com
This communication may contain privileged or other confidential
information. If you are not the intended recipient, or believe that you may
have received this communication in error, please reply to the sender
indicating that and delete the copy you received. In addition, you should
not print, copy, retransmit, disseminate, or otherwise use the information
contained in this communication. Thank You.
_______________________________________________
Orca-list mailing list
Orca-list gnome org
http://mail.gnome.org/mailman/listinfo/orca-list
Visit http://live.gnome.org/Orca for more information on Orca
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]