Re: Configure errors under yocto

[Colin Helliwell <colin helliwell ln-systems com>]

I think it was missing [under yocto/bitbake] the autogen.sh step.
I've corrected that (as a 'pre-configure' step), but still have subsequent errors which seem to have been due 
to output directories not having been created e.g. libnm-core, introspection.
I can get it to limp a little further by creating the directories in the pre-configure, but not totally.
Something perhaps not hooked in right to cater for the build directory being different to the source 
directory...?

> On 25 March 2017 at 06:24 Dan Williams <dcbw redhat com> wrote:
>
> On Fri, 2017-03-24 at 16:07 +0000, colin helliwell ln-systems com
> wrote:
>
> > Just trying to migrate my build from 1.4.2 (from a tarball) to 1.6
> > (from
> > git), but getting some errors in the configure.
> > I am passing some additional configure options, but this seems to be
> > something more basic?
>
> Default configure options will build documentation, which requires gtk-
> doc. If you don't have that or don't care about documentation and
> manpages, you can pass --disable-gtk-doc at configure/autogen time.
>
> Dan
>
> > $ ls
> > tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/networkmanager/1.6-
> > r0/git/bu
> > ild-aux
> > compile config.guess config.sub depcomp install-
> > sh ltmain.sh missing
> > tap-driver.sh test-driver
> >
> > (I also need the same 'touch ${S}/ABOUT-NLS' that I need for building
> > ModemManager -
> > https://lists.freedesktop.org/archives/modemmanager-devel/2017-Februa
> > ry/0039
> > 41.html )
> >
> > DEBUG: Executing python function sysroot_cleansstate
> > DEBUG: Python function sysroot_cleansstate finished
> > DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
> > 'common']
> > DEBUG: Executing shell function autotools_preconfigure
> > DEBUG: Shell function autotools_preconfigure finished
> > DEBUG: Executing python function autotools_copy_aclocals
> > DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
> > 'common']
> > DEBUG: Python function autotools_copy_aclocals finished
> > DEBUG: Executing shell function do_configure
> > automake (GNU automake) 1.15
> > Copyright (C) 2014 Free Software Foundation, Inc.
> > License GPLv2+: GNU GPL version 2 or later
> > <http://gnu.org/licenses/gpl-2.0.html>
> > This is free software: you are free to change and redistribute it.
> > There is NO WARRANTY, to the extent permitted by law.
> >
> > Written by Tom Tromey <tromey redhat com>
> >  and Alexandre Duret-Lutz <adl gnu org>.
> > AUTOV is 1
> > NOTE: Executing intltoolize --copy --force --automake
> > NOTE: Executing ACLOCAL="aclocal
> > --system-acdir=/home/colin/100051-karo/fsl-community-
> > bsp/build/tmp/work/cort
> > exa9hf-vfp-neon-poky-linux-gnueabi/networkmanager/1.6-
> > r0/build/aclocal-copy/
> > " autoreconf --verbose --install --force --exclude=autopoint -I
> > /home/colin/100051-karo/fsl-community-bsp/build/tmp/work/cortexa9hf-
> > vfp-neon
> > -poky-linux-gnueabi/networkmanager/1.6-r0/git/m4/
> > autoreconf: Entering directory `.'
> > autoreconf: running: aclocal
> > --system-acdir=/home/colin/100051-karo/fsl-community-
> > bsp/build/tmp/work/cort
> > exa9hf-vfp-neon-poky-linux-gnueabi/networkmanager/1.6-
> > r0/build/aclocal-copy/
> > -I
> > /home/colin/100051-karo/fsl-community-bsp/build/tmp/work/cortexa9hf-
> > vfp-neon
> > -poky-linux-gnueabi/networkmanager/1.6-r0/git/m4/ -I
> > /home/colin/100051-karo/fsl-community-bsp/build/tmp/work/cortexa9hf-
> > vfp-neon
> > -poky-linux-gnueabi/networkmanager/1.6-r0/git/m4/ --force
> > autoreconf: configure.ac: tracing
> > autoreconf: configure.ac: creating directory build-aux
> > autoreconf: running: libtoolize --copy --force
> > libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-
> > aux'.
> > libtoolize: copying file 'build-aux/ltmain.sh'
> > libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
> > libtoolize: copying file 'm4/libtool.m4'
> > libtoolize: copying file 'm4/ltoptions.m4'
> > libtoolize: copying file 'm4/ltsugar.m4'
> > libtoolize: copying file 'm4/ltversion.m4'
> > libtoolize: copying file 'm4/lt~obsolete.m4'
> > libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in
> > Makefile.am.
> > autoreconf: running:
> > /home/colin/100051-karo/fsl-community-bsp/build/tmp/sysroots/x86_64-
> > linux/us
> > r/bin/autoconf
> > --include=/home/colin/100051-karo/fsl-community-
> > bsp/build/tmp/work/cortexa9h
> > f-vfp-neon-poky-linux-gnueabi/networkmanager/1.6-r0/git/m4/ --force
> > autoreconf: running:
> > /home/colin/100051-karo/fsl-community-bsp/build/tmp/sysroots/x86_64-
> > linux/us
> > r/bin/autoheader
> > --include=/home/colin/100051-karo/fsl-community-
> > bsp/build/tmp/work/cortexa9h
> > f-vfp-neon-poky-linux-gnueabi/networkmanager/1.6-r0/git/m4/ --force
> > autoreconf: running: automake --add-missing --copy --force-missing
> > configure.ac:24: installing 'build-aux/compile'
> > configure.ac:43: installing 'build-aux/config.guess'
> > configure.ac:68: error: required file 'build-aux/config.rpath' not
> > found
> > configure.ac:43: installing 'build-aux/config.sub'
> > configure.ac:19: installing 'build-aux/install-sh'
> > configure.ac:19: installing 'build-aux/missing'
> > configure.ac:17: installing 'build-aux/tap-driver.sh'
> > Makefile.am: installing './INSTALL'
> > Makefile.am: installing 'build-aux/depcomp'
> > parallel-tests: installing 'build-aux/test-driver'
> > automake: error: cannot open < gtk-doc.make: No such file or
> > directory
> > autoreconf: automake failed with exit status: 1
> > ERROR: autoreconf execution failed.
> >
> > _______________________________________________
> > networkmanager-list mailing list
> > networkmanager-list gnome org
> > https://mail.gnome.org/mailman/listinfo/networkmanager-list