Re: MC 7304 ipv4v6

[Thomas Schäfer <tschaefer t-online de>]

Bjørn Mork <bjorn mork no> writes:

> Works for me(tm).  Only tested on an E392 for now:
>
>
> nemi:/tmp# ifconfig wwan1
> wwan1     Link encap:Ethernet  HWaddr 92:b9:2a:c0:4f:96
>           BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
> nemi:/tmp# cat /sys/class/net/wwan1/qmi/raw_ip
> N
> nemi:/tmp# echo 1 >/sys/class/net/wwan1/qmi/raw_ip
> nemi:/tmp# ifconfig wwan1
> wwan1     Link encap:UNSPEC  HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 POINTOPOINT NOARP MULTICAST
>  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>
> nemi:/tmp# cat /sys/class/net/wwan1/qmi/raw_ip
> Y
>
> bjorn nemi:~$ qmicli -d /dev/cdc-wdm1 
> --device-open-net='net-raw-ip|net-no-qos-header'
> --wds-start-network=apn=telenor --wds-follow-network 
> [/dev/cdc-wdm1] Network started
>         Packet data handle: '34967784'
>
> Ctrl+C will stop the network
> [/dev/cdc-wdm1] Connection status: 'connected'

Did you leave this terminal and opened a second one?




> bjorn nemi:~$ qmicli -d /dev/cdc-wdm1  --client-cid=1
> --client-no-release-cid --wds-get-current-settings [/dev/cdc-wdm1] Current
> settings retrieved:
>            IP Family: IPv4
>         IPv4 address: 46.157.38.113
>     IPv4 subnet mask: 255.255.255.252
> IPv4 gateway address: 46.157.38.114
>     IPv4 primary DNS: 193.213.112.4
>   IPv4 secondary DNS: 130.67.15.198
>                  MTU: 1500
>              Domains: none
> [/dev/cdc-wdm1] Client ID not released:
>         Service: 'wds'
>             CID: '1'

qmicli  -d /dev/cdc-wdm0 --device-open-net="net-raw-ip|net-no-qos-header" --
wds-start-network=apn=internet.t-mobile --wds-follow-network
[/dev/cdc-wdm0] Network started
        Packet data handle: '38972872'

Ctrl+C will stop the network
[/dev/cdc-wdm0] Connection status: 'connected'
[/dev/cdc-wdm0] Connection status: 'connected'
[/dev/cdc-wdm0] Connection status: 'connected'



I do not get the data:

hpmini:~ # qmicli  -d /dev/cdc-wdm0 --client-cid=1 --client-no-release-cid --
wds-get-current-settings
[27 Nov 2015, 21:38:18] -Warning ** Error reading from istream: Resource 
temporarily unavailable
error: operation failed: Transaction timed out
[/dev/cdc-wdm0] Client ID not released:
        Service: 'wds'
            CID: '1'
            

??????

Thomas