Re: wwan0 built in toshiba

[Dan Williams <dcbw redhat com>]

On Sat, 2013-08-31 at 13:06 +0200, Bjørn Mork wrote:
> Thomas Schäfer <tschaefer t-online de> writes:
>
> > Hello,
> >
> > a friend of mine has this built in modem. He uses it at the moment with 
> > nm/mm-->ttyACM-->ppp.
> >
> > But it works with too:
> >
> > echo -en 'at+cgdcont=1,"ip","web.vodafone.de"\r' > /dev/ttyACM0
> > echo -en 'AT*ENAP=1,1\r' > /dev/ttyACM0
> > dhclient wwan0
> >
> >
> > I am not sure about, what nm he is using, may be this device is already in 
> > wwan-mode supported. If not please add the wwan-support.
> >
> >
> > Regards,
> > Thomas 
> >
> >
> >
> > Bus 002 Device 004: ID 0930:1319 Toshiba Corp.
> > Device Descriptor:
> >   bLength                18
> >   bDescriptorType         1
> >   bcdUSB               2.00
> >   bDeviceClass            0 (Defined at Interface level)
> >   bDeviceSubClass         0
> >   bDeviceProtocol         0
> >   bMaxPacketSize0        64
> >   idVendor           0x0930 Toshiba Corp.
> >   idProduct          0x1319
> >   bcdDevice            0.00
> >   iManufacturer           1 TOSHIBA
> >   iProduct                2 H5321gw
>
> The mbm ModemManager plugin knows how to handle these modems, but this
> Toshiba device is not known yet:

Thomas, if you manually apply the patch to the udev rules on that
laptop, does the patch fix the issue?

Dan