|
On 04/10/2013 03:28 PM, Dan Williams
wrote:
Dan,On Wed, 2013-04-10 at 15:20 -0400, Nate Pleasant wrote:On 04/03/2013 03:50 PM, Nate Pleasant wrote:On 04/03/2013 03:43 PM, Dan Williams wrote:On Wed, 2013-04-03 at 14:05 -0500, Dan Williams wrote:On Tue, 2013-03-26 at 10:39 -0400, Nate Pleasant wrote:I know this is not a feature that is currently impelemented into ModemManager, but I'm hoping that once we get this solved, we can work on getting it added into the project. I'm running into an issue when trying to obtain from the Pantech UML290 the current data usage on the Verizon network. According to Verizon, you can dial a special number "#DATA" and then they will send a SMS message to the Pantech UML290 with the current network usage. See these links for more details: http://support.verizonwireless.com/clc/features/calling_features/number_features.html http://news.verizonwireless.com/news/2011/07/pr2011-07-01d.html The issue I have is I cannot dial "#DATA" using standard AT commands. I can use the ATD#777 and ATD*99***1# to establish a 3G and 4G network connection, respectively; so I know that the UML290 responds to my AT commands correctly. However, when I try dialing "ATD#DATA", I immediately get an ERROR returned. I've also tried establishing a network connection using the QMI interface and then dialing #DATA, but I get the same error.Same here. ATD#DATA returns ERROR. I don't think the UML290 supports this feature via the AT port. VZAccess requests data usage via the WMC port using command 0x56, which I haven't gotten around to reverse engineering yet. In fact, VZAccess doesn't use the UML290's AT port at all, just QMI and WMC. So you're kinda out of luck here, at least controlling it with the AT port.To clarify, it appears that if you send an SMS to the number "900080004008" with the content "POUND_DATA", you'll get a reply back with your data usage. This is what VZAccess does using the WMC port and proprietary WMC commands. It works for SMS too though on /dev/ttyACM0. Where the following says <ctl+z>, you do really want to hold down the Ctrl key and hit the Z key; that's how AT+CMGS works in text mode. AT+CMGF=1 OK AT+CMGS="900080004008"POUND_DATA<ctl+z>+CMGS: 19809 OK <wait 5 seconds> AT+CMGL="ALL" +CMGL: 4,"REC UNREAD","xxxxxxxxxx","13/04/03,14:37:15+00" Est as of 04/03 2:49PM: Data Usage: 0.001GB. +CMGL: 2,"STO SENT","900080004008","13/04/03,19:37:13+00" POUND_DATA OK DanDan, Great find! I'll do a USB sniff on my UML290 to see if the VZAccess Manager sends the SMS to the same phone number. Nate Nathaniel J. Pleasant | Accelerated Concepts | Developer | 1-813-279-2557 www.acceleratedconcepts.comDan, I confirmed with my UML290 that VZAccess is sending the POUND_DATA command to the same number you listed. It'd be interesting to find out what that number is and if there are other numbers like it that Verizon uses for various features; it's definitely not a regular US phone number. Anyway, I'm now able to successfully get the current network usage from Verizon by sending the appropriate SMS message. Thanks again for all your help! As a side note, I'm also working with the new Verizon Pantech UML295 modem, which is turning out to be vastly different than the UML290. You can see the work I've done so far in the link below. https://bitbucket.org/accelecon/modemmanager/wiki/PantechUML295Oh fun, one of those. Does it support QMI or AT or DIAG at all, or is it solely Web-based? Dan I don't believe it supports any of those. All I get is an eth interface for the device. Below is the dmesg and lsusb output relative to the UML295. $ dmesg [197342.916415] usb 1-2.2: new high-speed USB device number 17 using ehci-pci [197343.026546] scsi18 : usb-storage 1-2.2:1.0 [197344.029607] scsi 18:0:0:0: CD-ROM PANTECH CD-ROM 0000 PQ: 0 ANSI: 2 [197344.031698] sr1: scsi3-mmc drive: 24x/24x xa/form2 caddy [197344.032194] sr 18:0:0:0: Attached scsi CD-ROM sr1 [197354.965613] usb 1-2.2: USB disconnect, device number 17 [197355.276456] usb 1-2.2: new high-speed USB device number 18 using ehci-pci [197355.388668] cdc_ether 1-2.2:1.0 eth2: register 'cdc_ether' at usb-0000:00:02.1-2.2, CDC Ethernet Device, d0:57:85:69:f6:36 [197355.396540] hid-generic 0003:10A9:6064.0007: hiddev0,hidraw2: USB HID v2.00 Device [Pantech, Incorporated PANTECH UML295] on usb-0000:00:02.1-2.2/input2 [197355.398296] hid-generic 0003:10A9:6064.0008: hiddev0,hidraw3: USB HID v2.00 Device [Pantech, Incorporated PANTECH UML295] on usb-0000:00:02.1-2.2/input3 [197355.473783] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [197356.613488] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready $ lsusb -v -d 10a9:6064 Bus 001 Device 020: ID 10a9:6064 SK Teletech Co., Ltd Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x10a9 SK Teletech Co., Ltd idProduct 0x6064 bcdDevice 2.28 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 144 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 4 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 5 CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Ethernet: iMacAddress 7 (??) bmEthernetStatistics 0x00000000 wMaxSegmentSize 1514 wNumberMCFilters 0x0000 bNumberPowerFilters 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 9 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 8 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 2.00 bCountryCode 1 Arabic bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 28 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 9 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 2.00 bCountryCode 2 Belgian bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 28 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 |