Strange issues in debian testing, no idea what's going on

From: PongráczI <pongraczi pongraczistvan homelinux com>
To: networkmanager-list gnome org
Subject: Strange issues in debian testing, no idea what's going on
Date: Wed, 23 May 2012 15:07:23 +0200

Hi,

On my debian testing (i486) I run into issue with my modem + recent 0.5.2 MM + kernel 3.2.0-2-486

Modem stopped working, so, I made two logs using modem-manager.

1st case: cannot use the modem, even cannot see in devices list etc.: modem-manager.connection-lost.log

2nd case: I pull out the modem and plug back after some seconds, it get known, tried to connect but dropped the connection immediately. modem-manager.connection-lost_new_plug.log

3rd case: reboot, working well.

The attached messages.log contains the end of the 2nd case and a normal operation (boot, activated, everything working well at this moment).

In fact, I have no idea, what is going on and why these things happen. I did not see any segfault. Even, last night it was working all the night, but in the morning I had several issues.

It is possible, the weather is not so good here nowadays, probably the mobile service provider kicks out from the network, I do not know.

Could somebody check the logs, maybe you have more experiences.

Thank you!

IStván

<info>  [1337773534.332130] [main.c:167] main(): ModemManager (version 0.5.2.0) starting...
<info>  [1337773535.136193] [mm-manager.c:120] load_plugin(): Loaded plugin ZTE
<info>  [1337773535.157170] [mm-manager.c:120] load_plugin(): Loaded plugin Gobi
<info>  [1337773535.168162] [mm-manager.c:120] load_plugin(): Loaded plugin X22X
<info>  [1337773535.181725] [mm-manager.c:120] load_plugin(): Loaded plugin Novatel
<info>  [1337773535.193928] [mm-manager.c:120] load_plugin(): Loaded plugin Sierra
<info>  [1337773535.205966] [mm-manager.c:120] load_plugin(): Loaded plugin Option
<info>  [1337773535.216908] [mm-manager.c:120] load_plugin(): Loaded plugin Huawei
<info>  [1337773535.231988] [mm-manager.c:120] load_plugin(): Loaded plugin MotoC
<info>  [1337773535.242999] [mm-manager.c:120] load_plugin(): Loaded plugin AnyData
<info>  [1337773535.256385] [mm-manager.c:120] load_plugin(): Loaded plugin Linktop
<info>  [1337773535.267157] [mm-manager.c:120] load_plugin(): Loaded plugin Option High-Speed
<info>  [1337773535.280797] [mm-manager.c:120] load_plugin(): Loaded plugin Generic
<info>  [1337773535.293368] [mm-manager.c:120] load_plugin(): Loaded plugin Nokia
<info>  [1337773535.305709] [mm-manager.c:120] load_plugin(): Loaded plugin Ericsson MBM
<info>  [1337773535.316779] [mm-manager.c:120] load_plugin(): Loaded plugin Longcheer
<info>  [1337773535.331753] [mm-manager.c:120] load_plugin(): Loaded plugin Samsung
<info>  [1337773535.343101] [mm-manager.c:120] load_plugin(): Loaded plugin Wavecom
<info>  [1337773535.356869] [mm-manager.c:120] load_plugin(): Loaded plugin SimTech
<debug> [1337773535.420155] [mm-manager.c:809] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted
<debug> [1337773535.433230] [mm-manager.c:809] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted
<debug> [1337773535.445574] [mm-manager.c:809] device_added(): (tty/ttyS2): port's parent platform driver is not whitelisted
<debug> [1337773535.457176] [mm-manager.c:809] device_added(): (tty/ttyS3): port's parent platform driver is not whitelisted
<info>  [1337773535.490697] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773535.511986] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773535.521997] [mm-plugin-base.c:859] try_open(): (ttyUSB0): probe requested by plugin 'ZTE'
<info>  [1337773535.534469] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773535.545086] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773535.557244] [mm-plugin-base.c:859] try_open(): (ttyUSB1): probe requested by plugin 'ZTE'
<info>  [1337773535.568595] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773535.581319] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773535.590496] [mm-plugin-base.c:859] try_open(): (ttyUSB2): probe requested by plugin 'ZTE'
<debug> [1337773535.639960] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773535.676131] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773535.711254] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773536.734850] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773536.747539] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+GCAP<CR>'
<debug> [1337773536.779409] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773536.790237] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GCAP<CR>'
<debug> [1337773537.489255] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773537.505838] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info>  [1337773539.399267] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info>  [1337773539.426643] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<debug> [1337773539.571347] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB1) type secondary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773539.795639] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB1
<debug> [1337773539.804533] [mm-manager.c:317] add_modem(): Added modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773539.814057] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773539.826102] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773539.835686] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773539.848248] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773539.857323] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info>  [1337773539.868614] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773539.884302] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB2) type primary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773539.894529] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773539.906195] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773539.918049] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773539.927266] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 3 (open)
<info>  [1337773539.950652] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB2
<debug> [1337773539.960133] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773539.970484] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773540.002484] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773540.341022] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMI<CR>'
<debug> [1337773540.350517] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773540.392040] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773540.721146] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMM<CR>'
<debug> [1337773540.762380] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773541.190624] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMR<CR>'
<debug> [1337773541.243975] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773541.563843] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMI<CR>'
<debug> [1337773541.626947] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773541.934543] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMM<CR>'
<debug> [1337773541.995176] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773542.302684] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMR<CR>'
<debug> [1337773542.355702] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773542.671901] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI<CR>'
<debug> [1337773542.715144] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773543.059514] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI1<CR>'
<debug> [1337773543.778736] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773543.802197] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GSN<CR>'
<debug> [1337773543.862503] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773543.874542] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGSN<CR>'
<debug> [1337773543.950214] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773543.962166] [mm-modem-helpers.c:920] mm_create_device_identifier(): Device ID source '000019d200000117Manufacturer:ZTEINCORPORATEDModel:MF668ARevision:BD_MF668AV1.0.1B02IMEI:864851005185039+GCAP:+CGSM,+FCLASS,+DS864851005185039BD_MF668AV1.0.1B02MF668AZTEINCORPORATED'
<debug> [1337773543.973275] [mm-modem-helpers.c:921] mm_create_device_identifier(): Device ID 'b735f6159cf589e85f8a66cfff7b0bd4eea1a73a'
<debug> [1337773543.982603] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 2 (close)
<debug> [1337773543.992216] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773544.038260] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773544.048762] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773544.059481] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMEE=1<CR>'
<debug> [1337773544.142524] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773544.155010] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPIN?<CR>'
<debug> [1337773544.231146] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773544.240849] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773544.250372] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773544.262606] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CRSM=176,12258,0,0,10<CR>'
<debug> [1337773544.827472] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CRSM: 144,0,"986302003053001571F2"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773544.838623] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773544.848121] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info>  [1337773544.860238] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773544.871586] [mm-generic-gsm.c:507] get_iccid_done(): SIM ID source '8936200003350051172'
<debug> [1337773544.880645] [mm-generic-gsm.c:508] get_iccid_done(): SIM ID '77ac780d92e5c18295a5d48747eaa490ab1b8473'
<debug> [1337773544.890488] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773547.151968] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773552.156471] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773556.148942] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773560.149383] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773564.154098] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773568.150344] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773570.759048] [mm-serial-port.c:636] data_available(): (ttyUSB0) unexpected port hangup!
<debug> [1337773571.569620] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info>  [1337773571.620216] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info>  [1337773571.629584] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
mm_serial_port_close: assertion `priv->open_count > 0' failed<info>  [1337773571.658086] [mm-manager.c:862] device_removed(): (tty/ttyUSB1): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773571.697520] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB1) type secondary removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773571.721814] [mm-manager.c:862] device_removed(): (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773571.745818] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB2) type primary removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773571.757021] [mm-manager.c:204] remove_modem(): Removed modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
marshal_object: assertion `g_variant_is_object_path (path)' failedfailed to marshal parameter 1 for signal DeviceRemoved<info>  [1337773593.603675] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773595.166112] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773596.380467] [mm-plugin-base.c:859] try_open(): (ttyUSB1): probe requested by plugin 'ZTE'
<info>  [1337773596.441247] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773596.798584] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773596.812503] [mm-plugin-base.c:859] try_open(): (ttyUSB0): probe requested by plugin 'ZTE'
<info>  [1337773596.827215] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773596.842199] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773596.854463] [mm-plugin-base.c:859] try_open(): (ttyUSB2): probe requested by plugin 'ZTE'
<debug> [1337773596.868625] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773596.929885] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773596.970087] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773597.924967] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773597.938927] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+GCAP<CR>'
<debug> [1337773598.032484] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773598.046164] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GCAP<CR>'
<debug> [1337773598.683251] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773598.695905] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info>  [1337773598.706381] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info>  [1337773598.722352] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<debug> [1337773598.811486] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB1) type secondary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773598.833879] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB1
<debug> [1337773598.847680] [mm-manager.c:317] add_modem(): Added modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773598.859674] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773598.869863] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773598.896390] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773598.910120] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773598.920467] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info>  [1337773598.931240] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773598.954872] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB2) type primary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773598.967896] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773598.981707] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773598.991594] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773599.343825] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 3 (open)
<info>  [1337773599.353955] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB2
<debug> [1337773599.363049] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773599.372504] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773599.403050] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773599.412735] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMI<CR>'
<debug> [1337773599.453321] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.462991] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMM<CR>'
<debug> [1337773599.500587] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.512008] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMR<CR>'
<debug> [1337773599.552866] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.562598] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMI<CR>'
<debug> [1337773599.624654] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.634427] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMM<CR>'
<debug> [1337773599.680866] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.690659] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMR<CR>'
<debug> [1337773599.736816] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.747996] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI<CR>'
<debug> [1337773599.780616] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.790477] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI1<CR>'
<debug> [1337773599.824035] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.836354] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GSN<CR>'
<debug> [1337773599.880500] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.890745] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGSN<CR>'
<debug> [1337773599.936900] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.947381] [mm-modem-helpers.c:920] mm_create_device_identifier(): Device ID source '000019d200000117Manufacturer:ZTEINCORPORATEDModel:MF668ARevision:BD_MF668AV1.0.1B02IMEI:864851005185039+GCAP:+CGSM,+FCLASS,+DS864851005185039BD_MF668AV1.0.1B02MF668AZTEINCORPORATED'
<debug> [1337773599.958097] [mm-modem-helpers.c:921] mm_create_device_identifier(): Device ID 'b735f6159cf589e85f8a66cfff7b0bd4eea1a73a'
<debug> [1337773599.969401] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 2 (close)
<debug> [1337773599.978578] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773600.007298] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773600.020371] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773600.030317] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMEE=1<CR>'
<debug> [1337773600.082820] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773600.092876] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPIN?<CR>'
<debug> [1337773600.143625] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773600.167074] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773600.176319] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773600.186083] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CRSM=176,12258,0,0,10<CR>'
<debug> [1337773600.650810] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CRSM: 144,0,"986302003053001571F2"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773600.660999] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773600.671973] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info>  [1337773600.684097] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773600.695333] [mm-generic-gsm.c:507] get_iccid_done(): SIM ID source '8936200003350051172'
<debug> [1337773600.706589] [mm-generic-gsm.c:508] get_iccid_done(): SIM ID '77ac780d92e5c18295a5d48747eaa490ab1b8473'
<debug> [1337773600.716169] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773601.149906] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773605.150303] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773609.150739] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773613.151180] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773619.151842] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773623.152422] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773627.152855] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773631.149165] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info>  [1337773631.166177] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info>  [1337773631.193439] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
<info>  [1337773631.207643] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773631.219427] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773631.231061] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): --> 00 78 f0 7e
<debug> [1337773634.149487] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): --> 00 78 f0 7e
<debug> [1337773634.174466] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): <-- 00 4d 61 72 20 32 39 20 32 30 31 31 31 39 3a 31 39 3a 30 35 4d 61 72 20 32 39 20 32 30 31 31 31 39 3a 31 39 3a 30 35 4d 46 36 36 38 41 4d 31 00 00 08 00 00 00 04 e0 87 b4 7e
<debug> [1337773634.186671] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info>  [1337773634.196594] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info>  [1337773634.207091] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
<debug> [1337773634.222657] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB0) type QCDM claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773634.235710] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB0
<debug> [1337773634.247888] [mm-manager.c:265] check_export_modem(): Exported modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 as /org/freedesktop/ModemManager/Modems/0
<debug> [1337773634.257646] [mm-manager.c:278] check_export_modem(): (/org/freedesktop/ModemManager/Modems/0): VID 0x19D2 PID 0x0117 (usb)
<debug> [1337773634.268799] [mm-manager.c:279] check_export_modem(): (/org/freedesktop/ModemManager/Modems/0): data port is ttyUSB2
<info>  [1337773640.775896] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773641.893327] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<info>  [1337773641.904280] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disabled -> enabling)
<debug> [1337773642.018993] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0 V1<CR>'
<debug> [1337773642.064612] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.075454] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT%IPSYS?<CR>'
<debug> [1337773642.128495] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ERROR<CR><LF>'
<debug> [1337773642.138131] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error
<debug> [1337773642.149391] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATZ E0 V1 X4 &C1 +CMEE=1;+CFUN=1;<CR>'
<debug> [1337773642.298726] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.309200] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773642.349565] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.359537] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPMS?<CR>'
<debug> [1337773642.406263] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<info>  [1337773642.418515] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773642.430046] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773642.439858] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+IFC=1,1<CR>'
<debug> [1337773642.500501] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.511341] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPMS="ME","ME","ME"<CR>'
<debug> [1337773642.623317] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: 2,100,2,100,2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773642.633237] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CNMI=2,1,2,1,0<CR>'
<debug> [1337773642.728853] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CMS ERROR: 303<CR><LF>'
<debug> [1337773642.742446] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 303: Operation not supported
<debug> [1337773642.754604] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMGF=?<CR>'
<debug> [1337773642.809617] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CMGF: (0-1)<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773642.821043] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CUSD=1<CR>'
<debug> [1337773642.872574] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.886235] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND=?<CR>'
<debug> [1337773642.938037] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: ("battchg",(0-5)),("signal",(0-5)),("service",(0-1)),("call",(0-1)),("roam",(0-1)),("smsfull",(0-1)),("GPRS coverage",(0-1)),("callsetup",(0-3))<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773642.951405] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZSNT?<CR>'
<debug> [1337773643.006098] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZSNT: 0,0,1<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773643.018522] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS=?<CR>'
<debug> [1337773643.076816] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CSCS: ("IRA","GSM","UCS2")<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773643.088298] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMGF=1<CR>'
<debug> [1337773643.144533] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<info>  [1337773643.158158] [mm-generic-gsm.c:1704] sms_set_format_cb(): (ttyUSB2): using text mode for SMS
<debug> [1337773643.171007] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMER=3,0,0,1<CR>'
<debug> [1337773643.249741] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773643.261751] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CMER=3,0,0,1<CR>'
<debug> [1337773643.273726] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS="UCS2"<CR>'
<debug> [1337773643.348958] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773643.360981] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773643.380451] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS?<CR>'
<debug> [1337773643.436546] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CSCS: "UCS2"<CR><LF><CR><LF>OK<CR><LF>'
<info>  [1337773643.451985] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabling -> enabled)
<debug> [1337773643.465814] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG=2<CR>'
<debug> [1337773643.924751] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): number => "*99#"
<debug> [1337773643.947388] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): network_mode => 5
<debug> [1337773643.960909] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): apn => "net"
<debug> [1337773643.970788] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): allowed_mode => 1
<debug> [1337773643.983852] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): allowed_auth => 63
<debug> [1337773644.006507] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 0
<debug> [1337773644.021398] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 2
<debug> [1337773644.065958] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.084960] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773644.134694] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.154797] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773644.210641] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.223500] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZSNT=0,0,1<CR>'
<debug> [1337773644.306884] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.319073] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG?<CR>'
<debug> [1337773644.335930] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 3
<debug> [1337773644.389780] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.399847] [mm-generic-gsm.c:3007] mm_generic_gsm_set_reg_status(): CS registration state changed: 1
<info>  [1337773644.413618] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabled -> registered)
<debug> [1337773644.425540] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG=2<CR>'
<debug> [1337773644.485696] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.495980] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CREG=2<CR>'
<debug> [1337773644.507835] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=0,,<CR>'
<debug> [1337773644.553050] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.563955] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CGREG=2<CR>'
<debug> [1337773644.597734] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.613773] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,2;+COPS?<CR>'
<debug> [1337773644.656319] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.729313] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,2,"21601",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.740398] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,0;+COPS?<CR>'
<debug> [1337773644.834071] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,0,"Telenor HU",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.847527] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773644.897602] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.908190] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773644.970196] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.984187] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG?<CR>'
<debug> [1337773645.037903] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.047776] [mm-generic-gsm.c:3007] mm_generic_gsm_set_reg_status(): PS registration state changed: 1
<debug> [1337773645.061169] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG?<CR>'
<debug> [1337773645.109630] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.121987] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG?<CR>'
<debug> [1337773645.177338] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.525779] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 4
<debug> [1337773645.535415] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,2;+COPS?<CR>'
<debug> [1337773645.634652] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,2,"21601",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.644466] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,0;+COPS?<CR>'
<debug> [1337773645.749760] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,0,"Telenor HU",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.761981] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773645.815709] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.826487] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773645.874498] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.884869] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGDCONT?<CR>'
<debug> [1337773645.953761] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGDCONT: 1,"IP","net","",0,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.965800] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 5
<info>  [1337773645.975889] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (registered -> connecting)
<debug> [1337773645.985954] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATD*99***1#<CR>'
<debug> [1337773646.054839] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>CONNECT 28000000<CR><LF>'
<debug> [1337773646.065198] [mm-port.c:181] mm_port_set_connected(): (ttyUSB2): port now connected
<info>  [1337773646.076728] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connecting -> connected)
<debug> [1337773646.086689] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 6
<debug> [1337773646.479041] [mm-manager.c:793] device_added(): (net/ppp0): could not get port's parent device
<debug> [1337773650.893267] [mm-serial-port.c:636] data_available(): (ttyUSB1) unexpected port hangup!
<debug> [1337773653.216816] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info>  [1337773654.067517] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info>  [1337773654.079909] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<info>  [1337773654.104295] [mm-manager.c:862] device_removed(): (tty/ttyUSB0): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773654.118549] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB0) type QCDM removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773654.128234] [mm-serial-port.c:636] data_available(): (ttyUSB2) unexpected port hangup!
<debug> [1337773654.138995] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773654.150100] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<debug> [1337773654.159361] [mm-port.c:181] mm_port_set_connected(): (ttyUSB2): port now disconnected
<info>  [1337773654.169036] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<info>  [1337773654.183997] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disconnecting)
<info>  [1337773654.208324] [mm-manager.c:862] device_removed(): (tty/ttyUSB1): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773654.219633] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB1) type secondary removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773654.256186] [mm-manager.c:862] device_removed(): (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773654.274332] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB2) type primary removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773654.286176] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disconnecting -> disabled)
<debug> [1337773654.297247] [mm-manager.c:204] remove_modem(): Removed modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773667.463966] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773669.028285] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773670.261752] [mm-plugin-base.c:859] try_open(): (ttyUSB1): probe requested by plugin 'ZTE'
<info>  [1337773670.317398] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773670.329979] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773670.341162] [mm-plugin-base.c:859] try_open(): (ttyUSB0): probe requested by plugin 'ZTE'
<info>  [1337773670.351037] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773670.362583] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773670.374496] [mm-plugin-base.c:859] try_open(): (ttyUSB2): probe requested by plugin 'ZTE'
<debug> [1337773670.389172] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773670.454213] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773670.494130] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773671.444968] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773671.456287] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+GCAP<CR>'
<debug> [1337773671.551633] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773671.561557] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GCAP<CR>'
<debug> [1337773672.199424] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773672.551770] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info>  [1337773672.562857] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info>  [1337773672.574634] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<debug> [1337773672.679071] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773672.709444] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB1) type secondary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773672.721678] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB1
<debug> [1337773672.732568] [mm-manager.c:317] add_modem(): Added modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773672.754694] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773672.765688] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773672.777843] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773672.787169] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info>  [1337773672.797758] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773672.812639] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB2) type primary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info>  [1337773672.823862] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773672.836354] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773672.846072] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773672.857598] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 3 (open)
<info>  [1337773672.871669] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB2
<debug> [1337773672.887742] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773672.898709] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773672.927146] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773672.937228] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMI<CR>'
<debug> [1337773672.981753] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773672.991886] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMM<CR>'
<debug> [1337773673.032560] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.042482] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMR<CR>'
<debug> [1337773673.084650] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.096636] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMI<CR>'
<debug> [1337773673.144872] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.155072] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMM<CR>'
<debug> [1337773673.204789] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.214923] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMR<CR>'
<debug> [1337773673.260765] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.270667] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI<CR>'
<debug> [1337773673.304734] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.316377] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI1<CR>'
<debug> [1337773673.348592] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.358822] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GSN<CR>'
<debug> [1337773673.412812] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.423111] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGSN<CR>'
<debug> [1337773673.472823] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.483080] [mm-modem-helpers.c:920] mm_create_device_identifier(): Device ID source '000019d200000117Manufacturer:ZTEINCORPORATEDModel:MF668ARevision:BD_MF668AV1.0.1B02IMEI:864851005185039+GCAP:+CGSM,+FCLASS,+DS864851005185039BD_MF668AV1.0.1B02MF668AZTEINCORPORATED'
<debug> [1337773673.495136] [mm-modem-helpers.c:921] mm_create_device_identifier(): Device ID 'b735f6159cf589e85f8a66cfff7b0bd4eea1a73a'
<debug> [1337773673.506233] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 2 (close)
<debug> [1337773673.516794] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773673.543608] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773673.558683] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773673.568071] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMEE=1<CR>'
<debug> [1337773673.622935] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773673.634154] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPIN?<CR>'
<debug> [1337773673.687646] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.697520] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773673.707460] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773673.721857] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CRSM=176,12258,0,0,10<CR>'
<debug> [1337773674.187583] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CRSM: 144,0,"986302003053001571F2"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773674.198803] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773674.208568] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info>  [1337773674.220572] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773674.232050] [mm-generic-gsm.c:507] get_iccid_done(): SIM ID source '8936200003350051172'
<debug> [1337773674.241328] [mm-generic-gsm.c:508] get_iccid_done(): SIM ID '77ac780d92e5c18295a5d48747eaa490ab1b8473'
<debug> [1337773674.251387] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773675.150065] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773679.150457] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773683.150935] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<info>  [1337773688.560038] [main.c:41] mm_signal_handler(): Caught signal 2, shutting down...
<debug> [1337773688.915612] [mm-manager.c:204] remove_modem(): Removed modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
marshal_object: assertion `g_variant_is_object_path (path)' failedfailed to marshal parameter 1 for signal DeviceRemoved<debug> [1337773688.931450] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info>  [1337773688.943001] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info>  [1337773688.957462] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed

<info>  [1337773740.722483] [main.c:167] main(): ModemManager (version 0.5.2.0) starting...
<info>  [1337773741.567195] [mm-manager.c:120] load_plugin(): Loaded plugin ZTE
<info>  [1337773741.600272] [mm-manager.c:120] load_plugin(): Loaded plugin Gobi
<info>  [1337773741.614259] [mm-manager.c:120] load_plugin(): Loaded plugin X22X
<info>  [1337773741.626365] [mm-manager.c:120] load_plugin(): Loaded plugin Novatel
<info>  [1337773741.639401] [mm-manager.c:120] load_plugin(): Loaded plugin Sierra
<info>  [1337773741.650522] [mm-manager.c:120] load_plugin(): Loaded plugin Option
<info>  [1337773741.663114] [mm-manager.c:120] load_plugin(): Loaded plugin Huawei
<info>  [1337773741.676437] [mm-manager.c:120] load_plugin(): Loaded plugin MotoC
<info>  [1337773741.688010] [mm-manager.c:120] load_plugin(): Loaded plugin AnyData
<info>  [1337773741.698891] [mm-manager.c:120] load_plugin(): Loaded plugin Linktop
<info>  [1337773741.713284] [mm-manager.c:120] load_plugin(): Loaded plugin Option High-Speed
<info>  [1337773741.725311] [mm-manager.c:120] load_plugin(): Loaded plugin Generic
<info>  [1337773741.738436] [mm-manager.c:120] load_plugin(): Loaded plugin Nokia
<info>  [1337773741.749382] [mm-manager.c:120] load_plugin(): Loaded plugin Ericsson MBM
<info>  [1337773741.762308] [mm-manager.c:120] load_plugin(): Loaded plugin Longcheer
<info>  [1337773742.109172] [mm-manager.c:120] load_plugin(): Loaded plugin Samsung
<info>  [1337773742.119382] [mm-manager.c:120] load_plugin(): Loaded plugin Wavecom
<info>  [1337773742.130616] [mm-manager.c:120] load_plugin(): Loaded plugin SimTech
<debug> [1337773742.159294] [mm-manager.c:809] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted
<debug> [1337773742.171122] [mm-manager.c:809] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted
<debug> [1337773742.198060] [mm-manager.c:809] device_added(): (tty/ttyS2): port's parent platform driver is not whitelisted
<debug> [1337773742.208555] [mm-manager.c:809] device_added(): (tty/ttyS3): port's parent platform driver is not whitelisted
<info>  [1337773760.830035] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773763.433703] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773764.182846] [mm-plugin-base.c:859] try_open(): (ttyUSB1): probe requested by plugin 'ZTE'
<info>  [1337773764.223361] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773764.234273] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773764.245996] [mm-plugin-base.c:859] try_open(): (ttyUSB0): probe requested by plugin 'ZTE'
<info>  [1337773764.255534] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773764.269223] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773764.278576] [mm-plugin-base.c:859] try_open(): (ttyUSB2): probe requested by plugin 'ZTE'
<debug> [1337773764.307023] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773765.331240] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- 'ATE0+CPMS?'
<debug> [1337773765.355832] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773765.365174] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773765.382092] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773765.391752] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773765.402087] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773766.444618] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773766.455202] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773766.466507] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773766.477723] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773766.490829] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773766.499963] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773767.532861] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773767.545112] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773767.556394] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773767.568797] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773767.580160] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773767.591056] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773768.635719] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773768.645846] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773768.660451] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773768.674465] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773768.685808] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773768.696820] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773769.749972] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773769.760771] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773769.773648] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773769.784718] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773769.795804] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773769.808341] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+GCAP<CR>'
<debug> [1337773770.152595] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773770.573954] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773770.585832] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info>  [1337773770.615358] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info>  [1337773770.629053] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<debug> [1337773770.825537] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB1) type secondary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<info>  [1337773770.841152] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1 claimed port ttyUSB1
<debug> [1337773770.853255] [mm-manager.c:317] add_modem(): Added modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773770.864330] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773770.875094] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773770.999806] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773771.010424] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773771.023118] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GCAP<CR>'
<debug> [1337773771.790514] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773771.805913] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773771.814753] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info>  [1337773771.825106] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773771.839761] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB2) type primary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<info>  [1337773771.850771] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773771.863197] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773771.872658] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773771.883186] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 3 (open)
<info>  [1337773771.894632] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1 claimed port ttyUSB2
<debug> [1337773771.903731] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773771.913228] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773771.957979] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773771.967925] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMI<CR>'
<debug> [1337773772.029631] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.039450] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMM<CR>'
<debug> [1337773772.100669] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.127464] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMR<CR>'
<debug> [1337773772.188535] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.201152] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMI<CR>'
<debug> [1337773772.275024] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.286764] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMM<CR>'
<debug> [1337773772.358939] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.714193] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMR<CR>'
<debug> [1337773772.791213] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.800963] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI<CR>'
<debug> [1337773772.850487] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.862005] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI1<CR>'
<debug> [1337773772.915259] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.925031] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GSN<CR>'
<debug> [1337773772.994947] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773773.004856] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGSN<CR>'
<debug> [1337773773.046885] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773773.058318] [mm-modem-helpers.c:920] mm_create_device_identifier(): Device ID source '000019d200000117Manufacturer:ZTEINCORPORATEDModel:MF668ARevision:BD_MF668AV1.0.1B02IMEI:864851005185039+GCAP:+CGSM,+FCLASS,+DS864851005185039BD_MF668AV1.0.1B02MF668AZTEINCORPORATED'
<debug> [1337773773.069335] [mm-modem-helpers.c:921] mm_create_device_identifier(): Device ID 'b735f6159cf589e85f8a66cfff7b0bd4eea1a73a'
<debug> [1337773773.079140] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 2 (close)
<debug> [1337773773.090037] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773773.128904] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773773.139060] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773773.148953] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMEE=1<CR>'
<debug> [1337773773.213968] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773773.224271] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPIN?<CR>'
<debug> [1337773773.270919] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773773.281351] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773773.292467] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773773.303734] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CRSM=176,12258,0,0,10<CR>'
<debug> [1337773774.088394] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CRSM: 144,0,"986302003053001571F2"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773774.098617] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773774.110909] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info>  [1337773774.121719] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773774.132658] [mm-generic-gsm.c:507] get_iccid_done(): SIM ID source '8936200003350051172'
<debug> [1337773774.142257] [mm-generic-gsm.c:508] get_iccid_done(): SIM ID '77ac780d92e5c18295a5d48747eaa490ab1b8473'
<debug> [1337773774.153359] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773774.164910] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773778.149335] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773782.149763] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773786.150409] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773790.154937] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773794.151272] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773798.155497] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info>  [1337773800.483823] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info>  [1337773800.494859] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
<info>  [1337773800.508274] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773800.520460] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773800.532397] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): --> 00 78 f0 7e
<debug> [1337773804.152168] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): --> 00 78 f0 7e
<debug> [1337773804.189290] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): <-- 00 4d 61 72 20 32 39 20 32 30 31 31 31 39 3a 31 39 3a 30 35 4d 61 72 20 32 39 20 32 30 31 31 31 39 3a 31 39 3a 30 35 4d 46 36 36 38 41 4d 31 00 00 08 00 00 00 04 e0 87 b4 7e
<debug> [1337773804.202868] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info>  [1337773804.214092] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info>  [1337773804.227197] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
<debug> [1337773804.240058] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB0) type QCDM claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<info>  [1337773804.250107] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1 claimed port ttyUSB0
<debug> [1337773804.263585] [mm-manager.c:265] check_export_modem(): Exported modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1 as /org/freedesktop/ModemManager/Modems/0
<debug> [1337773804.274296] [mm-manager.c:278] check_export_modem(): (/org/freedesktop/ModemManager/Modems/0): VID 0x19D2 PID 0x0117 (usb)
<debug> [1337773804.285736] [mm-manager.c:279] check_export_modem(): (/org/freedesktop/ModemManager/Modems/0): data port is ttyUSB2
<info>  [1337773826.328551] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773826.770304] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<info>  [1337773826.780664] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disabled -> enabling)
<debug> [1337773826.899405] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0 V1<CR>'
<debug> [1337773827.286186] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773827.298487] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT%IPSYS?<CR>'
<debug> [1337773827.357020] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ERROR<CR><LF>'
<debug> [1337773827.368587] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error
<debug> [1337773827.381065] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATZ E0 V1 X4 &C1 +CMEE=1;+CFUN=1;<CR>'
<debug> [1337773827.534447] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773827.544253] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773827.580999] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773827.591689] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPMS?<CR>'
<debug> [1337773827.642439] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "SM",0,25,"SM",0,25,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<info>  [1337773827.990244] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773828.002619] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773828.012494] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+IFC=1,1<CR>'
<debug> [1337773828.069799] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.079569] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPMS="ME","ME","ME"<CR>'
<debug> [1337773828.183793] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: 2,100,2,100,2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.195138] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CNMI=2,1,2,1,0<CR>'
<debug> [1337773828.288110] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CMS ERROR: 303<CR><LF>'
<debug> [1337773828.297770] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 303: Operation not supported
<debug> [1337773828.309889] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMGF=?<CR>'
<debug> [1337773828.366290] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CMGF: (0-1)<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.377421] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CUSD=1<CR>'
<debug> [1337773828.425086] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.438875] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND=?<CR>'
<debug> [1337773828.497953] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: ("battchg",(0-5)),("signal",(0-5)),("service",(0-1)),("call",(0-1)),("roam",(0-1)),("smsfull",(0-1)),("GPRS coverage",(0-1)),("callsetup",(0-3))<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.509613] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZSNT?<CR>'
<debug> [1337773828.565262] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZSNT: 0,0,1<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.575249] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS=?<CR>'
<debug> [1337773828.630150] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CSCS: ("IRA","GSM","UCS2")<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.643431] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMGF=1<CR>'
<debug> [1337773828.701578] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<info>  [1337773828.712491] [mm-generic-gsm.c:1704] sms_set_format_cb(): (ttyUSB2): using text mode for SMS
<debug> [1337773828.723711] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMER=3,0,0,1<CR>'
<debug> [1337773828.801987] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.815293] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CMER=3,0,0,1<CR>'
<debug> [1337773828.825859] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS="UCS2"<CR>'
<debug> [1337773828.897538] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.910174] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.921590] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS?<CR>'
<debug> [1337773828.973927] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CSCS: "UCS2"<CR><LF><CR><LF>OK<CR><LF>'
<info>  [1337773828.987762] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabling -> enabled)
<debug> [1337773829.000101] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG=2<CR>'
<debug> [1337773829.856750] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773829.872958] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773829.927241] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773829.939275] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG?<CR>'
<debug> [1337773829.990119] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.005788] [mm-generic-gsm.c:3007] mm_generic_gsm_set_reg_status(): CS registration state changed: 1
<info>  [1337773830.029726] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabled -> registered)
<debug> [1337773830.042495] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG=2<CR>'
<debug> [1337773830.104173] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773830.115475] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CREG=2<CR>'
<debug> [1337773830.128389] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,2;+COPS?<CR>'
<debug> [1337773830.177378] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773830.188983] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CGREG=2<CR>'
<debug> [1337773830.237593] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,2,"21601",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.253880] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,0;+COPS?<CR>'
<debug> [1337773830.267971] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773830.352730] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,0,"Telenor HU",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.703923] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773830.755228] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.765218] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773830.818428] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.829661] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG?<CR>'
<debug> [1337773830.877384] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.886797] [mm-generic-gsm.c:3007] mm_generic_gsm_set_reg_status(): PS registration state changed: 1
<debug> [1337773830.897721] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,2;+COPS?<CR>'
<debug> [1337773830.990461] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,2,"21601",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.999910] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,0;+COPS?<CR>'
<debug> [1337773831.086815] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,0,"Telenor HU",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773831.099274] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773831.150731] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773831.161680] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773831.205420] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773859.150311] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773859.622368] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773859.632516] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773859.689555] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773877.397253] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): number => "*99#"
<debug> [1337773878.553531] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): network_mode => 5
<debug> [1337773878.976940] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): apn => "net"
<debug> [1337773878.987886] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): allowed_mode => 1
<debug> [1337773878.999553] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): allowed_auth => 63
<debug> [1337773879.009278] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 0
<debug> [1337773879.018878] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 2
<debug> [1337773879.046133] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZSNT=0,0,1<CR>'
<debug> [1337773879.179540] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773879.194974] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 3
<debug> [1337773879.206422] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG?<CR>'
<debug> [1337773879.282817] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773879.295257] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG?<CR>'
<debug> [1337773879.384338] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773879.394267] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 4
<debug> [1337773879.406999] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGDCONT?<CR>'
<debug> [1337773879.516361] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGDCONT: 1,"IP","net","",0,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773879.530271] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 5
<info>  [1337773879.541676] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (registered -> connecting)
<debug> [1337773879.553719] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATD*99***1#<CR>'
<debug> [1337773879.661322] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>CONNECT 28000000<CR><LF>'
<debug> [1337773879.673210] [mm-port.c:181] mm_port_set_connected(): (ttyUSB2): port now connected
<info>  [1337773879.686190] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connecting -> connected)
<debug> [1337773879.696665] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 6
<debug> [1337773880.271794] [mm-manager.c:793] device_added(): (net/ppp0): could not get port's parent device
<debug> [1337773889.157553] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CIND?<CR>'
<debug> [1337773893.150023] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+ZPAS?<CR>'
<info>  [1337773900.175391] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disconnecting)
<debug> [1337773900.204706] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CGACT=0,1<CR>'
<debug> [1337773901.690051] [mm-serial-port.c:636] data_available(): (ttyUSB2) unexpected port hangup!
<debug> [1337773902.772007] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info>  [1337773903.197704] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<debug> [1337773903.208340] [mm-port.c:181] mm_port_set_connected(): (ttyUSB2): port now disconnected
<info>  [1337773903.218082] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<info>  [1337773903.237938] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disconnecting -> connected)
<info>  [1337773940.527533] [main.c:41] mm_signal_handler(): Caught signal 2, shutting down...
<info>  [1337773940.958003] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disconnecting)
<info>  [1337773940.972155] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disconnecting -> connected)
disable_disconnect_done: (/sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1): error disconnecting the modem while disabling: (5) The serial port is not open.(mm-generic-gsm.c:2144):disable: runtime check failed: (priv->cid == -1)<debug> [1337773941.001498] [mm-generic-gsm.c:2181] disable(): Shutting down secondary port
<debug> [1337773941.017730] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CREG=0<CR>'
<debug> [1337773944.151406] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CGREG=0<CR>'

May 23 14:07:18 antiX12base kernel: [    2.851056] registered taskstats version 1
May 23 14:07:18 antiX12base kernel: [    2.851723] rtc_cmos 00:04: setting system clock to 2012-05-23 12:07:02 UTC (1337774822)
May 23 14:07:18 antiX12base kernel: [    2.852090] Initializing network drop monitor service
May 23 14:07:18 antiX12base kernel: [    2.852731] Freeing unused kernel memory: 448k freed
May 23 14:07:18 antiX12base kernel: [    2.854971] Write protecting the kernel text: 2592k
May 23 14:07:18 antiX12base kernel: [    2.855201] Write protecting the kernel read-only data: 1060k
May 23 14:07:18 antiX12base kernel: [    3.169517] r6040: RDC R6040 NAPI net driver,version 0.28 (07Oct2011)
May 23 14:07:18 antiX12base kernel: [    3.349081] r6040_eth_mii: probed
May 23 14:07:18 antiX12base kernel: [    3.349282] r6040 0000:00:08.0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01)
May 23 14:07:18 antiX12base kernel: [    3.411699] usbcore: registered new interface driver usbfs
May 23 14:07:18 antiX12base kernel: [    3.411984] usbcore: registered new interface driver hub
May 23 14:07:18 antiX12base kernel: [    3.426382] usbcore: registered new device driver usb
May 23 14:07:18 antiX12base kernel: [    3.431700] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 23 14:07:18 antiX12base kernel: [    3.431945] ehci_hcd 0000:00:0a.1: EHCI Host Controller
May 23 14:07:18 antiX12base kernel: [    3.432136] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
May 23 14:07:18 antiX12base kernel: [    3.453851] ehci_hcd 0000:00:0a.1: irq 15, io mem 0xfebdb800
May 23 14:07:18 antiX12base kernel: [    3.456745] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 23 14:07:18 antiX12base kernel: [    3.460992] SCSI subsystem initialized
May 23 14:07:18 antiX12base kernel: [    3.465771] Switching to clocksource tsc
May 23 14:07:18 antiX12base kernel: [    3.465901] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
May 23 14:07:18 antiX12base kernel: [    3.466134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 23 14:07:18 antiX12base kernel: [    3.466232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:07:18 antiX12base kernel: [    3.466350] usb usb1: Product: EHCI Host Controller
May 23 14:07:18 antiX12base kernel: [    3.466432] usb usb1: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
May 23 14:07:18 antiX12base kernel: [    3.466519] usb usb1: SerialNumber: 0000:00:0a.1
May 23 14:07:18 antiX12base kernel: [    3.474186] hub 1-0:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [    3.474302] hub 1-0:1.0: 2 ports detected
May 23 14:07:18 antiX12base kernel: [    3.474960] ehci_hcd 0000:00:0b.1: EHCI Host Controller
May 23 14:07:18 antiX12base kernel: [    3.475096] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
May 23 14:07:18 antiX12base kernel: [    3.499120] ehci_hcd 0000:00:0b.1: irq 10, io mem 0xfebdbc00
May 23 14:07:18 antiX12base kernel: [    3.510463] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
May 23 14:07:18 antiX12base kernel: [    3.510714] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
May 23 14:07:18 antiX12base kernel: [    3.510812] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:07:18 antiX12base kernel: [    3.510930] usb usb2: Product: EHCI Host Controller
May 23 14:07:18 antiX12base kernel: [    3.511013] usb usb2: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
May 23 14:07:18 antiX12base kernel: [    3.511099] usb usb2: SerialNumber: 0000:00:0b.1
May 23 14:07:18 antiX12base kernel: [    3.512189] hub 2-0:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [    3.512298] hub 2-0:1.0: 2 ports detected
May 23 14:07:18 antiX12base kernel: [    3.512949] ohci_hcd 0000:00:0a.0: OHCI Host Controller
May 23 14:07:18 antiX12base kernel: [    3.513088] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3
May 23 14:07:18 antiX12base kernel: [    3.513298] ohci_hcd 0000:00:0a.0: irq 5, io mem 0xfebd9000
May 23 14:07:18 antiX12base kernel: [    3.613238] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 23 14:07:18 antiX12base kernel: [    3.613351] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:07:18 antiX12base kernel: [    3.613471] usb usb3: Product: OHCI Host Controller
May 23 14:07:18 antiX12base kernel: [    3.613554] usb usb3: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
May 23 14:07:18 antiX12base kernel: [    3.613690] usb usb3: SerialNumber: 0000:00:0a.0
May 23 14:07:18 antiX12base kernel: [    3.620732] hub 3-0:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [    3.620851] hub 3-0:1.0: 2 ports detected
May 23 14:07:18 antiX12base kernel: [    3.621491] ohci_hcd 0000:00:0b.0: OHCI Host Controller
May 23 14:07:18 antiX12base kernel: [    3.630078] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 4
May 23 14:07:18 antiX12base kernel: [    3.630313] ohci_hcd 0000:00:0b.0: irq 9, io mem 0xfebda000
May 23 14:07:18 antiX12base kernel: [    3.738504] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 23 14:07:18 antiX12base kernel: [    3.738618] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:07:18 antiX12base kernel: [    3.738737] usb usb4: Product: OHCI Host Controller
May 23 14:07:18 antiX12base kernel: [    3.738819] usb usb4: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
May 23 14:07:18 antiX12base kernel: [    3.738904] usb usb4: SerialNumber: 0000:00:0b.0
May 23 14:07:18 antiX12base kernel: [    3.742019] hub 4-0:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [    3.742137] hub 4-0:1.0: 2 ports detected
May 23 14:07:18 antiX12base kernel: [    3.751463] scsi0 : pata_rdc
May 23 14:07:18 antiX12base kernel: [    3.754381] scsi1 : pata_rdc
May 23 14:07:18 antiX12base kernel: [    3.754999] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee80 bmdma 0xed00 irq 14
May 23 14:07:18 antiX12base kernel: [    3.755099] ata2: PATA max UDMA/100 cmd 0xee00 ctl 0xed80 bmdma 0xed08 irq 14
May 23 14:07:18 antiX12base kernel: [    3.825666] usb 1-1: new high-speed USB device number 2 using ehci_hcd
May 23 14:07:18 antiX12base kernel: [    3.962064] usb 1-1: New USB device found, idVendor=058f, idProduct=6254
May 23 14:07:18 antiX12base kernel: [    3.962194] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 23 14:07:18 antiX12base kernel: [    3.963939] hub 1-1:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [    3.964179] hub 1-1:1.0: 4 ports detected
May 23 14:07:18 antiX12base kernel: [    4.025943] ata1.00: ATA-6: SD04G     RDC SD-IDE HOST CONTROLLER, 01000000, max UDMA/133
May 23 14:07:18 antiX12base kernel: [    4.026086] ata1.00: 7677952 sectors, multi 0: LBA 
May 23 14:07:18 antiX12base kernel: [    4.026184] ata1.00: limited to UDMA/33 due to 40-wire cable
May 23 14:07:18 antiX12base kernel: [    4.026638] ata1.00: configured for UDMA/33
May 23 14:07:18 antiX12base kernel: [    4.027430] scsi 0:0:0:0: Direct-Access     ATA      SD04G     RDC SD 0100 PQ: 0 ANSI: 5
May 23 14:07:18 antiX12base kernel: [    4.072536] sd 0:0:0:0: [sda] 7677952 512-byte logical blocks: (3.93 GB/3.66 GiB)
May 23 14:07:18 antiX12base kernel: [    4.073242] sd 0:0:0:0: [sda] Write Protect is off
May 23 14:07:18 antiX12base kernel: [    4.073654] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
May 23 14:07:18 antiX12base kernel: [    4.079588]  sda: sda1
May 23 14:07:18 antiX12base kernel: [    4.082237] sd 0:0:0:0: [sda] Attached SCSI disk
May 23 14:07:18 antiX12base kernel: [    4.249851] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
May 23 14:07:18 antiX12base kernel: [    4.361253] usb 1-1.1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:07:18 antiX12base kernel: [    4.361425] usb 1-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:07:18 antiX12base kernel: [    4.361618] usb 1-1.1: Product: ZTE WCDMA Technologies MSM
May 23 14:07:18 antiX12base kernel: [    4.361734] usb 1-1.1: Manufacturer: ZTE,Incorporated
May 23 14:07:18 antiX12base kernel: [    4.361842] usb 1-1.1: SerialNumber: P680A1ZTED010000
May 23 14:07:18 antiX12base kernel: [    4.435106] usbcore: registered new interface driver uas
May 23 14:07:18 antiX12base kernel: [    4.454310] Initializing USB Mass Storage driver...
May 23 14:07:18 antiX12base kernel: [    4.461228] scsi2 : usb-storage 1-1.1:1.3
May 23 14:07:18 antiX12base kernel: [    4.462091] usbcore: registered new interface driver usb-storage
May 23 14:07:18 antiX12base kernel: [    4.462180] USB Mass Storage support registered.
May 23 14:07:18 antiX12base kernel: [    4.555683] kjournald starting.  Commit interval 5 seconds
May 23 14:07:18 antiX12base kernel: [    4.555835] EXT3-fs (sda1): mounted filesystem with ordered data mode
May 23 14:07:18 antiX12base kernel: [    5.470114] scsi 2:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
May 23 14:07:18 antiX12base kernel: [    5.474528] scsi 2:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
May 23 14:07:18 antiX12base kernel: [    5.481909] sd 2:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:07:18 antiX12base kernel: [    6.507732] input: PC Speaker as /devices/platform/pcspkr/input/input0
May 23 14:07:18 antiX12base kernel: [    6.620906] usbcore: registered new interface driver usbserial
May 23 14:07:18 antiX12base kernel: [    6.621150] USB Serial support registered for generic
May 23 14:07:18 antiX12base kernel: [    6.670304] usbcore: registered new interface driver usbserial_generic
May 23 14:07:18 antiX12base kernel: [    6.670408] usbserial: USB Serial Driver core
May 23 14:07:18 antiX12base kernel: [    6.729322] USB Serial support registered for GSM modem (1-port)
May 23 14:07:18 antiX12base kernel: [    6.775202] option 1-1.1:1.0: GSM modem (1-port) converter detected
May 23 14:07:18 antiX12base kernel: [    6.789627] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:07:18 antiX12base kernel: [    6.790018] option 1-1.1:1.1: GSM modem (1-port) converter detected
May 23 14:07:18 antiX12base kernel: [    6.814783] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:07:18 antiX12base kernel: [    6.815178] option 1-1.1:1.2: GSM modem (1-port) converter detected
May 23 14:07:18 antiX12base kernel: [    6.820964] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:07:18 antiX12base kernel: [    6.821806] usbcore: registered new interface driver option
May 23 14:07:18 antiX12base kernel: [    6.821972] option: v0.7.2:USB Driver for GSM modems
May 23 14:07:18 antiX12base kernel: [    6.822895] sr0: scsi-1 drive
May 23 14:07:18 antiX12base kernel: [    6.823013] cdrom: Uniform CD-ROM driver Revision: 3.20
May 23 14:07:18 antiX12base kernel: [    8.391009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/input/input1
May 23 14:07:18 antiX12base kernel: [   10.362912] EXT3-fs (sda1): using internal journal
May 23 14:07:18 antiX12base kernel: [   10.466968] aufs: module is from the staging directory, the quality is unknown, you have been warned.
May 23 14:07:18 antiX12base kernel: [   10.484156] aufs 3.2-20120312
May 23 14:07:18 antiX12base kernel: [   15.192902] fuse init (API version 7.17)
May 23 14:07:18 antiX12base kernel: [   16.348847] eth0: link UP - 100/full
May 23 14:08:29 antiX12base pppd[2142]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
May 23 14:08:29 antiX12base kernel: [   90.476457] PPP generic driver version 2.4.2
May 23 14:08:29 antiX12base pppd[2142]: pppd 2.4.5 started by root, uid 0
May 23 14:08:29 antiX12base pppd[2142]: Using interface ppp0
May 23 14:08:29 antiX12base pppd[2142]: Connect: ppp0 <--> /dev/ttyUSB2
May 23 14:08:29 antiX12base pppd[2142]: CHAP authentication succeeded
May 23 14:08:29 antiX12base pppd[2142]: CHAP authentication succeeded
May 23 14:08:29 antiX12base kernel: [   90.599235] PPP BSD Compression module registered
May 23 14:08:29 antiX12base kernel: [   90.626101] PPP Deflate Compression module registered
May 23 14:08:34 antiX12base kernel: [   95.864745] usb 1-1.1: USB disconnect, device number 3
May 23 14:08:34 antiX12base kernel: [   95.865461] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
May 23 14:08:34 antiX12base kernel: [   95.865615] option 1-1.1:1.0: device disconnected
May 23 14:08:34 antiX12base pppd[2142]: Modem hangup
May 23 14:08:34 antiX12base pppd[2142]: Connection terminated.
May 23 14:08:34 antiX12base kernel: [   95.876355] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
May 23 14:08:34 antiX12base kernel: [   95.876514] option 1-1.1:1.1: device disconnected
May 23 14:08:34 antiX12base kernel: [   95.892601] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
May 23 14:08:34 antiX12base kernel: [   95.892727] option 1-1.1:1.2: device disconnected
May 23 14:08:34 antiX12base pppd[2142]: Exit.
May 23 14:08:34 antiX12base kernel: [   96.168245] usb 1-1.1: new high-speed USB device number 4 using ehci_hcd
May 23 14:08:35 antiX12base kernel: [   96.279693] usb 1-1.1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:08:35 antiX12base kernel: [   96.279725] usb 1-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:08:35 antiX12base kernel: [   96.279745] usb 1-1.1: Product: ZTE WCDMA Technologies MSM
May 23 14:08:35 antiX12base kernel: [   96.279763] usb 1-1.1: Manufacturer: ZTE,Incorporated
May 23 14:08:35 antiX12base kernel: [   96.279780] usb 1-1.1: SerialNumber: P680A1ZTED010000
May 23 14:08:35 antiX12base kernel: [   96.289398] option 1-1.1:1.0: GSM modem (1-port) converter detected
May 23 14:08:35 antiX12base kernel: [   96.290771] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:08:35 antiX12base kernel: [   96.291904] option 1-1.1:1.1: GSM modem (1-port) converter detected
May 23 14:08:35 antiX12base kernel: [   96.299116] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:08:35 antiX12base kernel: [   96.301047] option 1-1.1:1.2: GSM modem (1-port) converter detected
May 23 14:08:35 antiX12base kernel: [   96.302996] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:08:35 antiX12base kernel: [   96.312196] scsi3 : usb-storage 1-1.1:1.3
May 23 14:08:35 antiX12base mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1"
May 23 14:08:35 antiX12base mtp-probe: bus: 1, device: 4 was not an MTP device
May 23 14:08:36 antiX12base kernel: [   97.317040] scsi 3:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
May 23 14:08:36 antiX12base kernel: [   97.318008] scsi 3:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
May 23 14:08:36 antiX12base kernel: [   97.334357] sr0: scsi-1 drive
May 23 14:08:36 antiX12base kernel: [   97.357316] sd 3:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:09:17 antiX12base pppd[2287]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
May 23 14:09:17 antiX12base pppd[2287]: pppd 2.4.5 started by root, uid 0
May 23 14:09:17 antiX12base pppd[2287]: Using interface ppp0
May 23 14:09:17 antiX12base pppd[2287]: Connect: ppp0 <--> /dev/ttyUSB2
May 23 14:09:17 antiX12base pppd[2287]: CHAP authentication succeeded
May 23 14:09:17 antiX12base pppd[2287]: CHAP authentication succeeded
May 23 14:09:24 antiX12base kernel: [  146.033339] usb 1-1.1: USB disconnect, device number 4
May 23 14:09:24 antiX12base kernel: [  146.034020] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
May 23 14:09:24 antiX12base kernel: [  146.034174] option 1-1.1:1.0: device disconnected
May 23 14:09:24 antiX12base pppd[2287]: Modem hangup
May 23 14:09:24 antiX12base pppd[2287]: Connection terminated.
May 23 14:09:24 antiX12base kernel: [  146.044505] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
May 23 14:09:24 antiX12base kernel: [  146.044664] option 1-1.1:1.1: device disconnected
May 23 14:09:24 antiX12base kernel: [  146.068068] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
May 23 14:09:24 antiX12base kernel: [  146.068195] option 1-1.1:1.2: device disconnected
May 23 14:09:24 antiX12base pppd[2287]: Exit.
May 23 14:09:25 antiX12base kernel: [  146.335722] usb 1-1.1: new high-speed USB device number 5 using ehci_hcd
May 23 14:09:25 antiX12base kernel: [  146.447031] usb 1-1.1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:09:25 antiX12base kernel: [  146.447063] usb 1-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:09:25 antiX12base kernel: [  146.447084] usb 1-1.1: Product: ZTE WCDMA Technologies MSM
May 23 14:09:25 antiX12base kernel: [  146.447101] usb 1-1.1: Manufacturer: ZTE,Incorporated
May 23 14:09:25 antiX12base kernel: [  146.447118] usb 1-1.1: SerialNumber: P680A1ZTED010000
May 23 14:09:25 antiX12base kernel: [  146.458176] option 1-1.1:1.0: GSM modem (1-port) converter detected
May 23 14:09:25 antiX12base kernel: [  146.459380] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:09:25 antiX12base kernel: [  146.461821] option 1-1.1:1.1: GSM modem (1-port) converter detected
May 23 14:09:25 antiX12base kernel: [  146.462918] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:09:25 antiX12base kernel: [  146.468409] option 1-1.1:1.2: GSM modem (1-port) converter detected
May 23 14:09:25 antiX12base kernel: [  146.469659] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:09:25 antiX12base mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1"
May 23 14:09:25 antiX12base kernel: [  146.475762] scsi4 : usb-storage 1-1.1:1.3
May 23 14:09:25 antiX12base mtp-probe: bus: 1, device: 5 was not an MTP device
May 23 14:09:26 antiX12base kernel: [  147.477264] scsi 4:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
May 23 14:09:26 antiX12base kernel: [  147.478093] scsi 4:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
May 23 14:09:26 antiX12base kernel: [  147.491932] sr0: scsi-1 drive
May 23 14:09:26 antiX12base kernel: [  147.508296] sd 4:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:09:26 antiX12base kernel: [  147.593886] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
May 23 14:09:26 antiX12base kernel: [  147.594041] option 1-1.1:1.0: device disconnected
May 23 14:09:26 antiX12base kernel: [  147.600430] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
May 23 14:09:26 antiX12base kernel: [  147.600619] option 1-1.1:1.1: device disconnected
May 23 14:09:26 antiX12base kernel: [  147.611695] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
May 23 14:09:26 antiX12base kernel: [  147.611827] option 1-1.1:1.2: device disconnected
May 23 14:09:26 antiX12base kernel: [  147.628729] usb 1-1.1: USB disconnect, device number 5
May 23 14:09:26 antiX12base kernel: [  147.887633] usb 1-1.1: new high-speed USB device number 6 using ehci_hcd
May 23 14:09:26 antiX12base kernel: [  147.999188] usb 1-1.1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:09:26 antiX12base kernel: [  147.999221] usb 1-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:09:26 antiX12base kernel: [  147.999242] usb 1-1.1: Product: ZTE WCDMA Technologies MSM
May 23 14:09:26 antiX12base kernel: [  147.999260] usb 1-1.1: Manufacturer: ZTE,Incorporated
May 23 14:09:26 antiX12base kernel: [  147.999277] usb 1-1.1: SerialNumber: P680A1ZTED010000
May 23 14:09:26 antiX12base kernel: [  148.005190] option 1-1.1:1.0: GSM modem (1-port) converter detected
May 23 14:09:26 antiX12base kernel: [  148.006355] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:09:26 antiX12base kernel: [  148.007242] option 1-1.1:1.1: GSM modem (1-port) converter detected
May 23 14:09:26 antiX12base kernel: [  148.010534] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:09:26 antiX12base kernel: [  148.015898] option 1-1.1:1.2: GSM modem (1-port) converter detected
May 23 14:09:26 antiX12base kernel: [  148.017392] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:09:26 antiX12base kernel: [  148.027952] scsi5 : usb-storage 1-1.1:1.3
May 23 14:09:27 antiX12base mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1"
May 23 14:09:27 antiX12base mtp-probe: bus: 1, device: 6 was not an MTP device
May 23 14:09:27 antiX12base kernel: [  149.032287] scsi 5:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
May 23 14:09:27 antiX12base kernel: [  149.033115] scsi 5:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
May 23 14:09:27 antiX12base kernel: [  149.062842] sr0: scsi-1 drive
May 23 14:09:27 antiX12base kernel: [  149.082675] sd 5:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:11:38 antiX12base kernel: [    0.000000] Initializing cgroup subsys cpuset
May 23 14:11:38 antiX12base kernel: [    0.000000] Initializing cgroup subsys cpu
May 23 14:11:38 antiX12base kernel: [    0.000000] Linux version 3.2.0-2-486 (Debian 3.2.16-1) (debian-kernel lists debian org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 Mon Apr 30 05:10:18 UTC 2012
May 23 14:11:38 antiX12base kernel: [    0.000000] BIOS-provided physical RAM map:
May 23 14:11:38 antiX12base kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
May 23 14:11:38 antiX12base kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
May 23 14:11:38 antiX12base kernel: [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
May 23 14:11:38 antiX12base kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
May 23 14:11:38 antiX12base syslog-ng[1573]: syslog-ng starting up; version='3.3.4'
May 23 14:11:38 antiX12base kernel: [    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
May 23 14:11:38 antiX12base kernel: [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
May 23 14:11:38 antiX12base kernel: [    0.000000] DMI not present or invalid.
May 23 14:11:38 antiX12base kernel: [    0.000000] last_pfn = 0x20000 max_arch_pfn = 0x100000
May 23 14:11:38 antiX12base kernel: [    0.000000] init_memory_mapping: 0000000000000000-0000000020000000
May 23 14:11:38 antiX12base kernel: [    0.000000] RAMDISK: 1f623000 - 1fff0000
May 23 14:11:38 antiX12base kernel: [    0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219)
May 23 14:11:38 antiX12base kernel: [    0.000000] 0MB HIGHMEM available.
May 23 14:11:38 antiX12base kernel: [    0.000000] 512MB LOWMEM available.
May 23 14:11:38 antiX12base kernel: [    0.000000]   mapped low ram: 0 - 20000000
May 23 14:11:38 antiX12base kernel: [    0.000000]   low ram: 0 - 20000000
May 23 14:11:38 antiX12base kernel: [    0.000000] Zone PFN ranges:
May 23 14:11:38 antiX12base kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
May 23 14:11:38 antiX12base kernel: [    0.000000]   Normal   0x00001000 -> 0x00020000
May 23 14:11:38 antiX12base kernel: [    0.000000]   HighMem  empty
May 23 14:11:38 antiX12base kernel: [    0.000000] Movable zone start PFN for each node
May 23 14:11:38 antiX12base kernel: [    0.000000] early_node_map[2] active PFN ranges
May 23 14:11:38 antiX12base kernel: [    0.000000]     0: 0x00000010 -> 0x0000009f
May 23 14:11:38 antiX12base kernel: [    0.000000]     0: 0x00000100 -> 0x00020000
May 23 14:11:38 antiX12base kernel: [    0.000000] Using APIC driver default
May 23 14:11:38 antiX12base kernel: [    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
May 23 14:11:38 antiX12base kernel: [    0.000000] No local APIC present or hardware disabled
May 23 14:11:38 antiX12base kernel: [    0.000000] APIC: disable apic facility
May 23 14:11:38 antiX12base kernel: [    0.000000] APIC: switched to apic NOOP
May 23 14:11:38 antiX12base kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
May 23 14:11:38 antiX12base kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
May 23 14:11:38 antiX12base kernel: [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
May 23 14:11:38 antiX12base kernel: [    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:df000000)
May 23 14:11:38 antiX12base kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
May 23 14:11:38 antiX12base kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129935
May 23 14:11:38 antiX12base kernel: [    0.000000] Kernel command line: root=UUID=7c5b4bf1-e3e5-4f3b-8fdf-27f6620ca748 ro
May 23 14:11:38 antiX12base kernel: [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
May 23 14:11:38 antiX12base kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
May 23 14:11:38 antiX12base kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
May 23 14:11:38 antiX12base kernel: [    0.000000] Initializing CPU#0
May 23 14:11:38 antiX12base kernel: [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
May 23 14:11:38 antiX12base kernel: [    0.000000] Memory: 503876k/524288k available (2590k kernel code, 19960k reserved, 1325k data, 448k init, 0k highmem)
May 23 14:11:38 antiX12base kernel: [    0.000000] virtual kernel memory layout:
May 23 14:11:38 antiX12base kernel: [    0.000000]     fixmap  : 0xfffa1000 - 0xfffff000   ( 376 kB)
May 23 14:11:38 antiX12base kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
May 23 14:11:38 antiX12base kernel: [    0.000000]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
May 23 14:11:38 antiX12base kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
May 23 14:11:38 antiX12base kernel: [    0.000000]       .init : 0xc13d3000 - 0xc1443000   ( 448 kB)
May 23 14:11:38 antiX12base kernel: [    0.000000]       .data : 0xc128782c - 0xc13d2e00   (1325 kB)
May 23 14:11:38 antiX12base kernel: [    0.000000]       .text : 0xc1000000 - 0xc128782c   (2590 kB)
May 23 14:11:38 antiX12base kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
May 23 14:11:38 antiX12base kernel: [    0.000000] NR_IRQS:2304 nr_irqs:256 16
May 23 14:11:38 antiX12base kernel: [    0.000000] Console: colour VGA+ 80x25
May 23 14:11:38 antiX12base kernel: [    0.000000] console [tty0] enabled
May 23 14:11:38 antiX12base kernel: [    0.000000] Fast TSC calibration using PIT
May 23 14:11:38 antiX12base kernel: [    0.000000] Detected 933.198 MHz processor.
May 23 14:11:38 antiX12base kernel: [    0.008009] Calibrating delay loop (skipped), value calculated using timer frequency.. 1866.39 BogoMIPS (lpj=3732792)
May 23 14:11:38 antiX12base kernel: [    0.012085] pid_max: default: 32768 minimum: 301
May 23 14:11:38 antiX12base kernel: [    0.012468] Security Framework initialized
May 23 14:11:38 antiX12base kernel: [    0.012564] AppArmor: AppArmor disabled by boot time parameter
May 23 14:11:38 antiX12base kernel: [    0.012724] Mount-cache hash table entries: 512
May 23 14:11:38 antiX12base kernel: [    0.013508] Initializing cgroup subsys cpuacct
May 23 14:11:38 antiX12base kernel: [    0.013603] Initializing cgroup subsys memory
May 23 14:11:38 antiX12base kernel: [    0.013742] Initializing cgroup subsys devices
May 23 14:11:38 antiX12base kernel: [    0.013825] Initializing cgroup subsys freezer
May 23 14:11:38 antiX12base kernel: [    0.013904] Initializing cgroup subsys net_cls
May 23 14:11:38 antiX12base kernel: [    0.013984] Initializing cgroup subsys blkio
May 23 14:11:38 antiX12base kernel: [    0.014108] Initializing cgroup subsys perf_event
May 23 14:11:38 antiX12base kernel: [    0.014378] CPU: Vortex86 SoC 05/08 stepping 06
May 23 14:11:38 antiX12base kernel: [    0.016730] Performance Events: 
May 23 14:11:38 antiX12base kernel: [    0.017817] NMI watchdog disabled (cpu0): hardware events not enabled
May 23 14:11:38 antiX12base kernel: [    0.018863] devtmpfs: initialized
May 23 14:11:38 antiX12base kernel: [    0.021177] print_constraints: dummy: 
May 23 14:11:38 antiX12base kernel: [    0.021689] NET: Registered protocol family 16
May 23 14:11:38 antiX12base kernel: [    0.023017] EISA bus registered
May 23 14:11:38 antiX12base kernel: [    0.024364] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=0
May 23 14:11:38 antiX12base kernel: [    0.024456] PCI: Using configuration type 1 for base access
May 23 14:11:38 antiX12base kernel: [    0.033841] bio: create slab <bio-0> at 0
May 23 14:11:38 antiX12base kernel: [    0.034518] ACPI: Interpreter disabled.
May 23 14:11:38 antiX12base kernel: [    0.035139] vgaarb: loaded
May 23 14:11:38 antiX12base kernel: [    0.035832] PCI: Probing PCI hardware
May 23 14:11:38 antiX12base kernel: [    0.040668] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
May 23 14:11:38 antiX12base kernel: [    0.041301] pci 0000:00:07.0: default IRQ router [17f3:6036]
May 23 14:11:38 antiX12base kernel: [    0.042468] Switching to clocksource pit
May 23 14:11:38 antiX12base kernel: [    0.050900] pnp: PnP ACPI: disabled
May 23 14:11:38 antiX12base kernel: [    0.050992] PnPBIOS: Scanning system for PnP BIOS support...
May 23 14:11:38 antiX12base kernel: [    0.051136] PnPBIOS: Found PnP BIOS installation structure at 0xc00f3150
May 23 14:11:38 antiX12base kernel: [    0.051229] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x3cca, dseg 0xf0000
May 23 14:11:38 antiX12base kernel: [    0.051997] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
May 23 14:11:38 antiX12base kernel: [    0.052102] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
May 23 14:11:38 antiX12base kernel: [    0.052200] system 00:00: [mem 0x000e4000-0x000fffff] could not be reserved
May 23 14:11:38 antiX12base kernel: [    0.052298] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
May 23 14:11:38 antiX12base kernel: [    0.052398] system 00:00: [mem 0xff000000-0xfffbffff] has been reserved
May 23 14:11:38 antiX12base kernel: [    0.052496] system 00:00: [mem 0xfffc0000-0xffffffff] has been reserved
May 23 14:11:38 antiX12base kernel: [    0.055600] system 00:09: [io  0x04d0-0x04d1] has been reserved
May 23 14:11:38 antiX12base kernel: [    0.055698] system 00:09: [io  0x0cf8-0x0cff] could not be reserved
May 23 14:11:38 antiX12base kernel: [    0.055791] system 00:09: [io  0xfc00-0xfc0f] has been reserved
May 23 14:11:38 antiX12base kernel: [    0.056259] system 00:0a: [io  0x03f0-0x03f5] has been reserved
May 23 14:11:38 antiX12base kernel: [    0.056398] PnPBIOS: 11 nodes reported by PnP BIOS; 11 recorded by driver
May 23 14:11:38 antiX12base kernel: [    0.079731] NET: Registered protocol family 2
May 23 14:11:38 antiX12base kernel: [    0.080186] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
May 23 14:11:38 antiX12base kernel: [    0.081748] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
May 23 14:11:38 antiX12base kernel: [    0.082331] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
May 23 14:11:38 antiX12base kernel: [    0.082648] TCP: Hash tables configured (established 16384 bind 16384)
May 23 14:11:38 antiX12base kernel: [    0.082738] TCP reno registered
May 23 14:11:38 antiX12base kernel: [    0.082817] UDP hash table entries: 256 (order: 0, 4096 bytes)
May 23 14:11:38 antiX12base kernel: [    0.082921] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
May 23 14:11:38 antiX12base kernel: [    0.083423] NET: Registered protocol family 1
May 23 14:11:38 antiX12base kernel: [    0.233916] Unpacking initramfs...
May 23 14:11:38 antiX12base kernel: [    2.351843] Freeing initrd memory: 10036k freed
May 23 14:11:38 antiX12base kernel: [    2.394519] audit: initializing netlink socket (disabled)
May 23 14:11:38 antiX12base kernel: [    2.394670] type=2000 audit(1337775072.392:1): initialized
May 23 14:11:38 antiX12base kernel: [    2.473515] HugeTLB registered 4 MB page size, pre-allocated 0 pages
May 23 14:11:38 antiX12base kernel: [    2.474429] VFS: Disk quotas dquot_6.5.2
May 23 14:11:38 antiX12base kernel: [    2.474656] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 23 14:11:38 antiX12base kernel: [    2.475092] msgmni has been set to 1003
May 23 14:11:38 antiX12base kernel: [    2.476258] alg: No test for stdrng (krng)
May 23 14:11:38 antiX12base kernel: [    2.476558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
May 23 14:11:38 antiX12base kernel: [    2.476684] io scheduler noop registered
May 23 14:11:38 antiX12base kernel: [    2.476760] io scheduler deadline registered
May 23 14:11:38 antiX12base kernel: [    2.476888] io scheduler cfq registered (default)
May 23 14:11:38 antiX12base kernel: [    2.477989] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 23 14:11:38 antiX12base kernel: [    2.478419] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
May 23 14:11:38 antiX12base kernel: [    2.478511] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
May 23 14:11:38 antiX12base kernel: [    2.479863] isapnp: Scanning for PnP cards...
May 23 14:11:38 antiX12base kernel: [    2.833665] isapnp: No Plug & Play device found
May 23 14:11:38 antiX12base kernel: [    2.834172] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
May 23 14:11:38 antiX12base kernel: [    2.838103] Linux agpgart interface v0.103
May 23 14:11:38 antiX12base kernel: [    2.840371] i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
May 23 14:11:38 antiX12base kernel: [    2.840466] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
May 23 14:11:38 antiX12base kernel: [    2.841397] serio: i8042 KBD port at 0x60,0x64 irq 1
May 23 14:11:38 antiX12base kernel: [    2.842623] mousedev: PS/2 mouse device common for all mice
May 23 14:11:38 antiX12base kernel: [    2.843505] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
May 23 14:11:38 antiX12base kernel: [    2.843644] rtc0: alarms up to one day, 114 bytes nvram
May 23 14:11:38 antiX12base kernel: [    2.844323] EISA: Probing bus 0 at eisa.0
May 23 14:11:38 antiX12base kernel: [    2.844593] EISA: Detected 0 cards.
May 23 14:11:38 antiX12base kernel: [    2.844669] cpuidle: using governor ladder
May 23 14:11:38 antiX12base kernel: [    2.844745] cpuidle: using governor menu
May 23 14:11:38 antiX12base kernel: [    2.846207] TCP cubic registered
May 23 14:11:38 antiX12base kernel: [    2.846453] NET: Registered protocol family 10
May 23 14:11:38 antiX12base kernel: [    2.849834] Mobile IPv6
May 23 14:11:38 antiX12base kernel: [    2.849914] NET: Registered protocol family 17
May 23 14:11:38 antiX12base kernel: [    2.850015] Registering the dns_resolver key type
May 23 14:11:38 antiX12base kernel: [    2.850173] Using IPI Shortcut mode
May 23 14:11:38 antiX12base kernel: [    2.851301] registered taskstats version 1
May 23 14:11:38 antiX12base kernel: [    2.851973] rtc_cmos 00:04: setting system clock to 2012-05-23 12:11:13 UTC (1337775073)
May 23 14:11:38 antiX12base kernel: [    2.852339] Initializing network drop monitor service
May 23 14:11:38 antiX12base kernel: [    2.852979] Freeing unused kernel memory: 448k freed
May 23 14:11:38 antiX12base kernel: [    2.855217] Write protecting the kernel text: 2592k
May 23 14:11:38 antiX12base kernel: [    2.855447] Write protecting the kernel read-only data: 1060k
May 23 14:11:38 antiX12base kernel: [    3.184009] r6040: RDC R6040 NAPI net driver,version 0.28 (07Oct2011)
May 23 14:11:38 antiX12base kernel: [    3.304131] r6040_eth_mii: probed
May 23 14:11:38 antiX12base kernel: [    3.304335] r6040 0000:00:08.0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01)
May 23 14:11:38 antiX12base kernel: [    3.411728] usbcore: registered new interface driver usbfs
May 23 14:11:38 antiX12base kernel: [    3.412014] usbcore: registered new interface driver hub
May 23 14:11:38 antiX12base kernel: [    3.431596] usbcore: registered new device driver usb
May 23 14:11:38 antiX12base kernel: [    3.460028] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 23 14:11:38 antiX12base kernel: [    3.460293] ehci_hcd 0000:00:0a.1: EHCI Host Controller
May 23 14:11:38 antiX12base kernel: [    3.460515] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
May 23 14:11:38 antiX12base kernel: [    3.465726] Switching to clocksource tsc
May 23 14:11:38 antiX12base kernel: [    3.467961] SCSI subsystem initialized
May 23 14:11:38 antiX12base kernel: [    3.495762] ehci_hcd 0000:00:0a.1: irq 15, io mem 0xfebdb800
May 23 14:11:38 antiX12base kernel: [    3.528825] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 23 14:11:38 antiX12base kernel: [    3.569123] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
May 23 14:11:38 antiX12base kernel: [    3.569381] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 23 14:11:38 antiX12base kernel: [    3.569479] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:11:38 antiX12base kernel: [    3.569600] usb usb1: Product: EHCI Host Controller
May 23 14:11:38 antiX12base kernel: [    3.569728] usb usb1: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
May 23 14:11:38 antiX12base kernel: [    3.569816] usb usb1: SerialNumber: 0000:00:0a.1
May 23 14:11:38 antiX12base kernel: [    3.583695] hub 1-0:1.0: USB hub found
May 23 14:11:38 antiX12base kernel: [    3.583818] hub 1-0:1.0: 2 ports detected
May 23 14:11:38 antiX12base kernel: [    3.584475] ohci_hcd 0000:00:0a.0: OHCI Host Controller
May 23 14:11:38 antiX12base kernel: [    3.584671] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
May 23 14:11:38 antiX12base kernel: [    3.584887] ohci_hcd 0000:00:0a.0: irq 5, io mem 0xfebd9000
May 23 14:11:38 antiX12base kernel: [    3.759200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 23 14:11:38 antiX12base kernel: [    3.759311] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:11:38 antiX12base kernel: [    3.759432] usb usb2: Product: OHCI Host Controller
May 23 14:11:38 antiX12base kernel: [    3.759515] usb usb2: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
May 23 14:11:38 antiX12base kernel: [    3.759600] usb usb2: SerialNumber: 0000:00:0a.0
May 23 14:11:38 antiX12base kernel: [    3.765766] hub 2-0:1.0: USB hub found
May 23 14:11:38 antiX12base kernel: [    3.765894] hub 2-0:1.0: 2 ports detected
May 23 14:11:38 antiX12base kernel: [    3.766561] ehci_hcd 0000:00:0b.1: EHCI Host Controller
May 23 14:11:38 antiX12base kernel: [    3.766698] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
May 23 14:11:38 antiX12base kernel: [    3.789790] ehci_hcd 0000:00:0b.1: irq 10, io mem 0xfebdbc00
May 23 14:11:38 antiX12base kernel: [    3.801731] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
May 23 14:11:38 antiX12base kernel: [    3.801965] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
May 23 14:11:38 antiX12base kernel: [    3.802062] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:11:38 antiX12base kernel: [    3.802181] usb usb3: Product: EHCI Host Controller
May 23 14:11:38 antiX12base kernel: [    3.802263] usb usb3: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
May 23 14:11:38 antiX12base kernel: [    3.802348] usb usb3: SerialNumber: 0000:00:0b.1
May 23 14:11:38 antiX12base kernel: [    3.804040] hub 3-0:1.0: USB hub found
May 23 14:11:38 antiX12base kernel: [    3.804154] hub 3-0:1.0: 2 ports detected
May 23 14:11:38 antiX12base kernel: [    3.817765] scsi0 : pata_rdc
May 23 14:11:38 antiX12base kernel: [    3.825842] scsi1 : pata_rdc
May 23 14:11:38 antiX12base kernel: [    3.827000] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee80 bmdma 0xed00 irq 14
May 23 14:11:38 antiX12base kernel: [    3.827100] ata2: PATA max UDMA/100 cmd 0xee00 ctl 0xed80 bmdma 0xed08 irq 14
May 23 14:11:38 antiX12base kernel: [    3.827682] ohci_hcd 0000:00:0b.0: OHCI Host Controller
May 23 14:11:38 antiX12base kernel: [    3.827831] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 4
May 23 14:11:38 antiX12base kernel: [    3.828052] ohci_hcd 0000:00:0b.0: irq 9, io mem 0xfebda000
May 23 14:11:38 antiX12base kernel: [    3.911696] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 23 14:11:38 antiX12base kernel: [    3.911805] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:11:38 antiX12base kernel: [    3.911925] usb usb4: Product: OHCI Host Controller
May 23 14:11:38 antiX12base kernel: [    3.912008] usb usb4: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
May 23 14:11:38 antiX12base kernel: [    3.912094] usb usb4: SerialNumber: 0000:00:0b.0
May 23 14:11:38 antiX12base kernel: [    3.913859] hub 4-0:1.0: USB hub found
May 23 14:11:38 antiX12base kernel: [    3.913976] hub 4-0:1.0: 2 ports detected
May 23 14:11:38 antiX12base kernel: [    4.098083] ata1.00: ATA-6: SD04G     RDC SD-IDE HOST CONTROLLER, 01000000, max UDMA/133
May 23 14:11:38 antiX12base kernel: [    4.098220] ata1.00: 7677952 sectors, multi 0: LBA 
May 23 14:11:38 antiX12base kernel: [    4.098317] ata1.00: limited to UDMA/33 due to 40-wire cable
May 23 14:11:38 antiX12base kernel: [    4.098771] ata1.00: configured for UDMA/33
May 23 14:11:38 antiX12base kernel: [    4.099539] scsi 0:0:0:0: Direct-Access     ATA      SD04G     RDC SD 0100 PQ: 0 ANSI: 5
May 23 14:11:38 antiX12base kernel: [    4.126512] usb 3-1: new high-speed USB device number 2 using ehci_hcd
May 23 14:11:38 antiX12base kernel: [    4.160009] sd 0:0:0:0: [sda] 7677952 512-byte logical blocks: (3.93 GB/3.66 GiB)
May 23 14:11:38 antiX12base kernel: [    4.160678] sd 0:0:0:0: [sda] Write Protect is off
May 23 14:11:38 antiX12base kernel: [    4.161012] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
May 23 14:11:38 antiX12base kernel: [    4.166760]  sda: sda1
May 23 14:11:38 antiX12base kernel: [    4.169467] sd 0:0:0:0: [sda] Attached SCSI disk
May 23 14:11:38 antiX12base kernel: [    4.261389] usb 3-1: New USB device found, idVendor=19d2, idProduct=2000
May 23 14:11:38 antiX12base kernel: [    4.261596] usb 3-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:11:38 antiX12base kernel: [    4.261721] usb 3-1: Product: ZTE WCDMA Technologies MSM
May 23 14:11:38 antiX12base kernel: [    4.261860] usb 3-1: Manufacturer: ZTE,Incorporated
May 23 14:11:38 antiX12base kernel: [    4.261971] usb 3-1: SerialNumber: P680A1ZTED010000
May 23 14:11:38 antiX12base kernel: [    4.289472] usbcore: registered new interface driver uas
May 23 14:11:38 antiX12base kernel: [    4.313361] Initializing USB Mass Storage driver...
May 23 14:11:38 antiX12base kernel: [    4.314498] scsi2 : usb-storage 3-1:1.0
May 23 14:11:38 antiX12base kernel: [    4.315844] usbcore: registered new interface driver usb-storage
May 23 14:11:38 antiX12base kernel: [    4.316057] USB Mass Storage support registered.
May 23 14:11:38 antiX12base kernel: [    4.588001] EXT3-fs (sda1): recovery required on readonly filesystem
May 23 14:11:38 antiX12base kernel: [    4.588108] EXT3-fs (sda1): write access will be enabled during recovery
May 23 14:11:38 antiX12base kernel: [    5.315923] scsi 2:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
May 23 14:11:38 antiX12base kernel: [    5.344214] sr0: scsi-1 drive
May 23 14:11:38 antiX12base kernel: [    5.344338] cdrom: Uniform CD-ROM driver Revision: 3.20
May 23 14:11:38 antiX12base kernel: [   13.717142] kjournald starting.  Commit interval 5 seconds
May 23 14:11:38 antiX12base kernel: [   13.717311] EXT3-fs (sda1): recovery complete
May 23 14:11:38 antiX12base kernel: [   13.722798] EXT3-fs (sda1): mounted filesystem with ordered data mode
May 23 14:11:38 antiX12base kernel: [   15.597794] input: PC Speaker as /devices/platform/pcspkr/input/input0
May 23 14:11:38 antiX12base kernel: [   16.965762] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/input/input1
May 23 14:11:38 antiX12base kernel: [   18.902801] EXT3-fs (sda1): using internal journal
May 23 14:11:38 antiX12base kernel: [   19.006864] aufs: module is from the staging directory, the quality is unknown, you have been warned.
May 23 14:11:38 antiX12base kernel: [   19.024065] aufs 3.2-20120312
May 23 14:11:38 antiX12base kernel: [   19.988611] usb 3-1: USB disconnect, device number 2
May 23 14:11:38 antiX12base kernel: [   23.509779] usb 3-1: new high-speed USB device number 3 using ehci_hcd
May 23 14:11:38 antiX12base kernel: [   23.647595] usb 3-1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:11:38 antiX12base kernel: [   23.647730] usb 3-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:11:38 antiX12base kernel: [   23.647853] usb 3-1: Product: ZTE WCDMA Technologies MSM
May 23 14:11:38 antiX12base kernel: [   23.647962] usb 3-1: Manufacturer: ZTE,Incorporated
May 23 14:11:38 antiX12base kernel: [   23.648071] usb 3-1: SerialNumber: P680A1ZTED010000
May 23 14:11:38 antiX12base kernel: [   23.667351] scsi3 : usb-storage 3-1:1.3
May 23 14:11:38 antiX12base kernel: [   23.825065] usbcore: registered new interface driver usbserial
May 23 14:11:38 antiX12base kernel: [   23.825331] USB Serial support registered for generic
May 23 14:11:38 antiX12base kernel: [   23.827677] usbcore: registered new interface driver usbserial_generic
May 23 14:11:38 antiX12base kernel: [   23.827777] usbserial: USB Serial Driver core
May 23 14:11:38 antiX12base kernel: [   23.886151] USB Serial support registered for GSM modem (1-port)
May 23 14:11:38 antiX12base kernel: [   23.888558] option 3-1:1.0: GSM modem (1-port) converter detected
May 23 14:11:38 antiX12base kernel: [   23.895160] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:11:38 antiX12base kernel: [   23.895505] option 3-1:1.1: GSM modem (1-port) converter detected
May 23 14:11:38 antiX12base kernel: [   23.904753] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:11:38 antiX12base kernel: [   23.905108] option 3-1:1.2: GSM modem (1-port) converter detected
May 23 14:11:38 antiX12base kernel: [   23.921681] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:11:38 antiX12base kernel: [   23.927569] usbcore: registered new interface driver option
May 23 14:11:38 antiX12base kernel: [   23.927665] option: v0.7.2:USB Driver for GSM modems
May 23 14:11:38 antiX12base kernel: [   24.026049] fuse init (API version 7.17)
May 23 14:11:38 antiX12base kernel: [   24.310200] eth0: link UP - 100/full
May 23 14:11:38 antiX12base kernel: [   24.674261] scsi 3:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
May 23 14:11:38 antiX12base kernel: [   24.675328] scsi 3:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
May 23 14:11:38 antiX12base kernel: [   24.691912] sr0: scsi-1 drive
May 23 14:11:38 antiX12base kernel: [   24.718559] sd 3:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:12:49 antiX12base pppd[2386]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
May 23 14:12:49 antiX12base kernel: [   99.092686] PPP generic driver version 2.4.2
May 23 14:12:49 antiX12base pppd[2386]: pppd 2.4.5 started by root, uid 0
May 23 14:12:49 antiX12base pppd[2386]: Using interface ppp0
May 23 14:12:49 antiX12base pppd[2386]: Connect: ppp0 <--> /dev/ttyUSB2
May 23 14:12:49 antiX12base pppd[2386]: CHAP authentication succeeded
May 23 14:12:49 antiX12base pppd[2386]: CHAP authentication succeeded
May 23 14:12:49 antiX12base kernel: [   99.272720] PPP BSD Compression module registered
May 23 14:12:49 antiX12base kernel: [   99.319239] PPP Deflate Compression module registered
May 23 14:12:54 antiX12base pppd[2386]: Could not determine remote IP address: defaulting to 10.64.64.64
May 23 14:12:54 antiX12base pppd[2386]: local  IP address 84.224.70.135
May 23 14:12:54 antiX12base pppd[2386]: remote IP address 10.64.64.64
May 23 14:12:54 antiX12base pppd[2386]: primary   DNS address 217.79.128.45
May 23 14:12:54 antiX12base pppd[2386]: secondary DNS address 217.79.128.40
May 23 14:37:02 antiX12base -- MARK --

[Date Prev][Date Next] [Thread Prev][Thread Next] [Thread Index] [Date Index] [Author Index]