NM won't start Qualcomm Gobi

[binro <robin binro org>]

I just installed NM and I am impressed. The WiFi started OK and it got my VPN
working when I had failed using scripts. However, it fails to start my 3G
modem. I get: 
 

 Apr 14 20:21:07 topaz NetworkManager[5791]: <info> Activation (ttyUSB1)
starting connection 'M1 - 
 Mobile Broadband' 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <info> (ttyUSB1): device state
change: disconnected -> 
 prepare (reason 'none') [30 40 0] 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <info> Activation (ttyUSB1)
Stage 1 of 5 (Device Prepare) 
 scheduled... 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <info> Activation (ttyUSB1)
Stage 1 of 5 (Device Prepare) 
 started... 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <info> Activation (ttyUSB1)
Stage 1 of 5 (Device Prepare) 
 complete. 
 Apr 14 20:21:07 topaz modem-manager: (ttyUSB1) opening serial device... 
 Apr 14 20:21:07 topaz modem-manager: Modem
/org/freedesktop/ModemManager/Modems/0: state changed 
 (disabled -> enabling) 
 Apr 14 20:21:07 topaz modem-manager: Modem
/org/freedesktop/ModemManager/Modems/0: state changed 
 (enabling -> enabled) 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <info> WWAN now enabled by
management service 
 Apr 14 20:21:07 topaz modem-manager: Modem
/org/freedesktop/ModemManager/Modems/0: state changed 
 (enabled -> registered) 
 Apr 14 20:21:07 topaz modem-manager: Modem
/org/freedesktop/ModemManager/Modems/0: state changed 
 (registered -> connecting) 
 Apr 14 20:21:07 topaz modem-manager: Modem
/org/freedesktop/ModemManager/Modems/0: state changed 
 (connecting -> registered) 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <warn> GSM connection failed:
(32) No cause information 
 available 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <info> (ttyUSB1): device state
change: prepare -> failed 
 (reason 'unknown') [40 120 1] 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <warn> Activation (ttyUSB1)
failed. 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <info> (ttyUSB1): device state
change: failed -> disconnected 
 (reason 'none') [120 30 0] 
 Apr 14 20:21:07 topaz NetworkManager[5791]: <info> (ttyUSB1): deactivating
device (reason 'none') 
 [0] 
 Apr 14 20:21:07 topaz NetworkManager[5791]: nm_system_iface_flush_routes:
assertion `ifindex > 0' 
 failed 
 Apr 14 20:21:07 topaz NetworkManager[5791]:
nm_system_iface_flush_addresses: assertion `ifindex > 
 0' failed 
 

which looks like it is not getting very far. This modem *does* work fine if
I start it with scripts. It would just be nice to control everything from
the same widget. 
 
 TIA
-- 
View this message in context: http://old.nabble.com/NM-won%27t-start-Qualcomm-Gobi-tp33686983p33686983.html
Sent from the Gnome - NetworkManager mailing list archive at Nabble.com.