Re: Possible to force ttyUSB2 for Prolink PH-300?

[Dan Williams <dcbw redhat com>]

On Fri, 2011-05-27 at 22:36 +0800, Ascanio Alba wrote:
> The same udev rules used for 1e0e:9200 work for 1e0e:9100:
> 
> Tks for the pointer.

I've also added the rules to MM git.

Dan


> #! create the serial ports
> modprobe -v option
> echo "1e0e 9100" > /sys/bus/usb-serial/drivers/option1/new_id
> 
> #/etc/udev/rules.d/77-mm-9100.rules
> # do not edit this file, it will be overwritten on update
> 
> # Simtech makes modules that other companies rebrand, like:
> #
> # A-LINK 3GU
> # SCT UM300
> #
> # Most of these values were scraped from various SimTech-based Windows
> # driver .inf files.  *mdm.inf lists the main command ports, while
> # *ser.inf lists the aux ports that may be used for PPP.
> 
> 
> ACTION!="add|change", GOTO="mm_simtech_port_types_end"
> SUBSYSTEM!="tty", GOTO="mm_simtech_port_types_end"
> 
> SUBSYSTEMS=="usb", ATTRS{idVendor}=="1e0e",
> GOTO="mm_alink_vendorcheck"
> GOTO="mm_simtech_port_types_end"
> 
> LABEL="mm_alink_vendorcheck"
> SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*",
> ENV{.MM_USBIFNUM}="$attr{bInterfaceNumber}"
> 
> ATTRS{idProduct}=="9100", ENV{.MM_USBIFNUM}=="03",
> ENV{ID_MM_SIMTECH_PORT_TYPE_MODEM}="1"
> ATTRS{idProduct}=="9100", ENV{.MM_USBIFNUM}=="01",
> ENV{ID_MM_SIMTECH_PORT_TYPE_AUX}="1"
> ATTRS{idProduct}=="9100", ENV{ID_MM_SIMTECH_TAGGED}="1"
> 
> GOTO="mm_simtech_port_types_end"
> 
> LABEL="mm_simtech_port_types_end"
>