Re: Possible to force ttyUSB2 for Prolink PH-300?

[Ascanio Alba <ascanio alba4 gmail com>]

The same udev rules used for 1e0e:9200 work for 1e0e:9100:

Tks for the pointer.

#! create the serial ports
modprobe -v option
echo "1e0e 9100" > /sys/bus/usb-serial/drivers/option1/new_id

#/etc/udev/rules.d/77-mm-9100.rules
# do not edit this file, it will be overwritten on update

# Simtech makes modules that other companies rebrand, like:
#
# A-LINK 3GU
# SCT UM300
#
# Most of these values were scraped from various SimTech-based Windows
# driver .inf files.  *mdm.inf lists the main command ports, while
# *ser.inf lists the aux ports that may be used for PPP.


ACTION!="add|change", GOTO="mm_simtech_port_types_end"
SUBSYSTEM!="tty", GOTO="mm_simtech_port_types_end"

SUBSYSTEMS=="usb", ATTRS{idVendor}=="1e0e", GOTO="mm_alink_vendorcheck"
GOTO="mm_simtech_port_types_end"

LABEL="mm_alink_vendorcheck"
SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*", ENV{.MM_USBIFNUM}="$attr{bInterfaceNumber}"

ATTRS{idProduct}=="9100", ENV{.MM_USBIFNUM}=="03", ENV{ID_MM_SIMTECH_PORT_TYPE_MODEM}="1"
ATTRS{idProduct}=="9100", ENV{.MM_USBIFNUM}=="01", ENV{ID_MM_SIMTECH_PORT_TYPE_AUX}="1"
ATTRS{idProduct}=="9100", ENV{ID_MM_SIMTECH_TAGGED}="1"

GOTO="mm_simtech_port_types_end"

LABEL="mm_simtech_port_types_end"