Re: Problem in associating with a given AP

[Vikram Ravindra <vikramravindra214 gmail com>]

Hi,

I believe that this is the extract of the log file that you are looking for.
It shows that only the essid, scan_ssid and key_mgmt are written into the
configuration file for the supplicant, and not the BSSID of the AP. Please
let me know if there is something else that you may need.

Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> (wlan0): supplicant
connection state:  completed -> disconnected
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Activation
(wlan0/wireless): connection 'Auto WMn3' requires no security.  No secrets
needed.
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Config: added 'ssid'
value 'WMn3'
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Config: added
'scan_ssid' value '1'
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Config: added
'key_mgmt' value 'NONE'
Aug 17 09:42:43 localhost NetworkManager[14236]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.


On Wed, Aug 17, 2011 at 3:54 AM, Dan Williams <dcbw@...> wrote:

    On Sun, 2011-08-14 at 22:28 -0700, Vikram Ravindra wrote:
    > hi,
    >
    > I am using DBus interface to communicate with the Network Manager. I
have
    > used the "ActivateConnection" method, and have passed all the
necessary
    > arguments (like the service name, object paths of wifi, AP, etc), but
i find
    > that the Network Manager is not writing the details of the BSSID into
the
    > wpa_supplicant's configuration file. Why is it so? Please ask me for
details
    > that you might need to answer my query. Thanks in advance!

    Can you post some logs from NM that show what's going on?  Usually they
    go to /var/log/messages or /var/log/daemon.log.

    Dan





-- 
Regards,
Vikram Ravindra.

Dan Williams wrote:
> 
> On Sun, 2011-08-14 at 22:28 -0700, Vikram Ravindra wrote:
>> hi,
>> 
>> I am using DBus interface to communicate with the Network Manager. I have
>> used the "ActivateConnection" method, and have passed all the necessary
>> arguments (like the service name, object paths of wifi, AP, etc), but i
>> find
>> that the Network Manager is not writing the details of the BSSID into the
>> wpa_supplicant's configuration file. Why is it so? Please ask me for
>> details
>> that you might need to answer my query. Thanks in advance!
> 
> Can you post some logs from NM that show what's going on?  Usually they
> go to /var/log/messages or /var/log/daemon.log.
> 
> Dan
> 
> 
> _______________________________________________
> networkmanager-list mailing list
> networkmanager-list gnome org
> http://mail.gnome.org/mailman/listinfo/networkmanager-list
> 
> 

-- 
View this message in context: http://old.nabble.com/Problem-in-associating-with-a-given-AP-tp32262247p32276964.html
Sent from the Gnome - NetworkManager mailing list archive at Nabble.com.