Hello sir,
I tried it, I also tried to connect using WVdial. the results where
[ameenrashadv ameen ~]$ su -
Password:
[root ameen ~]# do tail -f /var/log/messages
-bash: syntax error near unexpected token `do'
[root ameen ~]# tail -f /var/log/messages
Mar 21 17:17:23 localhost rtkit-daemon[1890]: Sucessfully made thread
2469 of process 2466 (/usr/bin/pulseaudio) owned by '42' RT at priority
5.
Mar 21 17:17:23 localhost rtkit-daemon[1890]: Sucessfully made thread
2470 of process 2466 (/usr/bin/pulseaudio) owned by '42' RT at priority
5.
Mar 21 17:17:24 localhost modem-manager: (ttyUSB2) closing serial
device...
Mar 21 17:17:35 localhost rtkit-daemon[1890]: Sucessfully made thread
2657 of process 2657 (/usr/bin/pulseaudio) owned by '500' high priority
at nice level -11.
Mar 21 17:17:35 localhost pulseaudio[2657]: pid.c: Daemon already
running.
Mar 21 17:17:57 localhost ntfs-3g[2924]: Version 2010.1.16 integrated
FUSE 27
Mar 21 17:17:57 localhost ntfs-3g[2924]: Mounted /dev/sda8 (Read-Write,
label "Local Disk", NTFS 3.1)
Mar 21 17:17:57 localhost ntfs-3g[2924]: Cmdline options:
rw,nosuid,nodev,uhelper=devkit,uid=500,gid=501,dmask=0077
Mar 21 17:17:57 localhost ntfs-3g[2924]: Mount options:
rw,nosuid,nodev,uhelper=devkit,silent,allow_other,nonempty,relatime,fsname=/dev/sda8,blkdev,blksize=4096
Mar 21 17:17:57 localhost ntfs-3g[2924]: Global ownership and
permissions enforced
Mar 21 17:20:13 localhost kernel: PPP generic driver version 2.4.2
Mar 21 17:20:13 localhost pppd[3037]: pppd 2.4.5 started by root, uid 0
Mar 21 17:20:13 localhost pppd[3037]: Using interface ppp0
Mar 21 17:20:13 localhost pppd[3037]: Connect: ppp0 <-->
/dev/ttyUSB0
Mar 21 17:20:16 localhost pppd[3037]: CHAP authentication succeeded
Mar 21 17:20:16 localhost pppd[3037]: CHAP authentication succeeded
Mar 21 17:20:16 localhost kernel: PPP Deflate Compression module
registered
Mar 21 17:20:17 localhost pppd[3037]: local IP address 117.254.145.169
Mar 21 17:20:17 localhost pppd[3037]: remote IP address 192.168.52.12
Mar 21 17:20:17 localhost pppd[3037]: primary DNS address
218.248.240.181
Mar 21 17:20:17 localhost pppd[3037]: secondary DNS address
208.67.220.220
but I was not able to access any website through Chorome, Firefox,
etc..... What may be the problem?
What I have to do as a next step?
Thanks In advance
Regards,
Rashad
Dan Williams wrote:
On Tue, 2010-03-16 at 08:11 +0530, Smartboy wrote:
Hello Dan,
I think it's a usual problem, I found the same questions in
several linux forums (with earlier version of Fedora). but I didn't
got a solution yet. Fedora says Modem is not responding. but It's
working well in Windows.
i tried
http://www.kenneyjacob.com/2008/04/01/how-to-configure-bsnl-evdo-usb-broadband-in-linux/
I got the reply as
[root ameen ~]# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: AT+CRM=1
--> Sending: ATQ0
--> Re-Sending: AT+CRM=1
--> Modem not responding.
[root ameen ~]#
This is probably because the serial port is not an AT capable port.
Only one port of most devices is AT capable. You've probably run into
the QCDM port here.
Dan
Dan Williams wrote:
On Sat, 2010-03-13 at 08:42 +1100, Smartboy wrote:
Hello Dan,
Thanks for getting back to me. I'm using ZTE AC8700 800M Wireless
network terminal. It's having both EVDO service and 1X (CDMA2000)
service. It's service provider is BSNL india.
I am a new user of Linux. I just changed to Fedora 12 from Win 7
before 2 weeks. so I don't know much tech details about it. Anyway I
would like to continue using as much as I can. but, now I'm not able
to use internet using my LAPTOP.
Can you pls let me know what I want to do to debug in detail?
"
1) service NetworkManager stop
2) killall -TERM modem-manager
3) modem-manager --debug
4) service NetworkManager start
5) try to reproduce the problem, and then reply to this mail with the
output of modem-manager
"
is there any TERMINAL command?
Yeah, these are terminal commands. But you found that out... Are you
familiar at all with 'minicom' at all? There's some upcoming stuff that
allows us to actually talk to these modems and find out their status,
since they dont' provide a very good AT command set. We can try to see
if the device supports any commands, but otherwise we'll need to wait a
bit until we can get the new stuff in...
Dan
sothat I can check it easily...
Note : The Device is getting detected. but I'm not able to connect
internet. (I havn't made any change in setting, the only thing is I
updated fedora 12 including network manager.)
Waiting to hear back from you,
Regards,
Rashad
so It's a big problem for me.
Dan Williams wrote:
On Thu, 2010-03-11 at 21:51 +0530, Mr. smart wrote:
Hello,
I'm using ZTE EVDO Wireless terminal (AC8700) . It was working well
in fedora.... but Yesterday I updated to the new updates including
network manager, Now my ZTE is not getting connected ...
Please help me.........
Let me know if you need anymore info regarding this.............
Does your provider *only* have EVDO service, ie it does not provide
1xRTT service? You can do the following to help debug:
1) service NetworkManager stop
2) killall -TERM modem-manager
3) modem-manager --debug
4) service NetworkManager start
5) try to reproduce the problem, and then reply to this mail with the
output of modem-manager
Thanks,
Dan
|
