>
>
> if (old_dcd_state && !portdata->dcd_state) {
> struct tty_struct *tty =
>
> tty_port_tty_get(&port->port);
> if (tty && !C_CLOCAL(tty))
> tty_hangup(tty);
> tty_kref_put(tty);
> }
>
>
> -Jason
>
>
> On Wed, Mar 17, 2010 at 8:04 PM, Dan Williams <
dcbw redhat com> wrote:
> On Wed, 2010-03-17 at 17:48 -0400, Jason Glasgow wrote:
> > Dan,
> > I tried the patch below, but it had no effect.
>
>
> Are you comfortable with rebuilding a single kernel driver
> (don't need
> to do the whole kernel)? If so, we could put some code into
> the
> 'option' driver to see if the tty_hangup() call in
> option_instat_callback() is causing your problem or not. It's
> actually
> pretty easy, if you have the option.c file and kernel headers
> from your
> kernel version. If you're not familiar with the process I can
> give you
> some tips.
>
>
> Dan
>
> > -Jason
> >
> >
> >
> >
> > diff --git a/src/mm-serial-port.c b/src/mm-serial-port.c
> >
> >
> > index 07010e1..0ed57f9 100644
> >
> >
> > --- a/src/mm-serial-port.c
> >
> >
> > +++ b/src/mm-serial-port.c
> >
> >
> > @@ -358,7 +358,7 @@ config_fd (MMSerialPort *self, GError
> **error)
> >
> >
> > stbuf.c_cc[VEOF] = 1;
> >
> >
> >
> >
> >
> > stbuf.c_cflag &= ~(CBAUD | CSIZE | CSTOPB | CLOCAL |
> PARENB);
> >
> >
> > - stbuf.c_cflag |= (speed | bits | CREAD | 0 | parity |
> stopbits);
> >
> >
> > + stbuf.c_cflag |= (speed | bits | CREAD | 0 | parity |
> stopbits |
> > CLOCAL);
> >
> >
> >
> >
> > if (ioctl (priv->fd, TCSETA, &stbuf) < 0) {
> >
> >
> > g_set_error (error,
> >
> >
> >
> >
> > jglasgow visitor-1950-269a-x600:modemmanager$
> >
> >
> >
> > On Mon, Mar 15, 2010 at 8:22 PM, Jason Glasgow
> <
jglasgow google com>
> > wrote:
> > Sure, I'll give that a try and let you know what
> happens.
> > Thanks, -Jason
> >
> >
> >
> > On Mon, Mar 15, 2010 at 7:13 PM, Dan Williams
> > <
dcbw redhat com> wrote:
> > On Fri, 2010-03-12 at 12:50 -0500, Jason
> Glasgow
> > wrote:
> > > Dan,
> > >
> > >
> > > Novatel U760. The modem appears to be
> fine (not
> > sure what you mean
> > > drop off the bus. If I reopen the device
> all is
> > fine). I hacked up
> > > my version of the code (mm-generic-cdma.c)
> to always
> > call
> > > mm_serial_port_open() before using the
> file
> > descriptor, and it works
> > > great. But I don't think this is a good
> solution.
> >
> >
> > It looks like this device actually cares
> about DCD
> > state, or at least
> > it's sending messages that make 'option'
> think it
> > does. Can you try
> > adding CLOCAL to the c_cflags in
> mm-serial-port.c's
> > config_fd()
> > function? Just logical OR it together with
> the rest
> > of the flags there
> > and let us know if that helps things.
> >
> > I've been meaning to add CLOCAL for a while,
> since for
> > most 3G modems
> > the control lines are completely ignored by
> either the
> > driver or the
> > device anyway, but I've shied away from it
> because
> > it's a change that
> > could potentially break stuff that I have no
> way to
> > test. There's a lot
> > of odd hardware out there. Now that we're
> on the
> > track to MM 0.4
> > though, we may want to revisit that.
> >
> > Dan
> >
> >
> > >
> > > -Jason
> > >
> > >
> > > diff --git a/src/mm-generic-cdma.c
> > b/src/mm-generic-cdma.c
> > > index 50cd86c..7f44775 100644
> > > --- a/src/mm-generic-cdma.c
> > > +++ b/src/mm-generic-cdma.c
> > > @@ -598,6 +598,10 @@ connect (MMModem
> *modem,
> > >
> > > info = mm_callback_info_new (modem,
> callback,
> > user_data);
> > > command = g_strconcat ("DT", number,
> NULL);
> > > + if (!mm_serial_port_open
> (priv->primary,
> > &info->error)) {
> > > + g_assert (info->error);
> > > + /* TODO(jglasgow): what should we
> do? */
> > > + }
> > > mm_serial_port_queue_command
> (priv->primary,
> > command, 90,
> > > dial_done, info);
> > > g_free (command);
> > > }
> > > @@ -620,7 +624,9 @@ disconnect_flash_done
> > (MMSerialPort *port,
> > >
> > MM_MODEM_STATE_REASON_NONE);
> > > }
> > > } else {
> > > - mm_port_set_connected
> > (MM_GENERIC_CDMA_GET_PRIVATE
> > > (info->modem)->data, FALSE);
> > > + MMGenericCdmaPrivate *priv =
> > MM_GENERIC_CDMA_GET_PRIVATE
> > > (info->modem);
> > > +
> > > + mm_port_set_connected
> (priv->data, FALSE);
> > > update_enabled_state
> (MM_GENERIC_CDMA
> > (info->modem), FALSE,
> > > MM_MODEM_STATE_REASON_NONE);
> > > }
> > >
> > > @@ -753,6 +759,10 @@ get_card_info
> (MMModem *modem,
> > > port = priv->secondary;
> > > }
> > >
> > > + if (!mm_serial_port_open (port,
> &info->error))
> > {
> > > + g_assert (info->error);
> > > + /* TODO(jglasgow): what should we
> do? */
> > > + }
> > > mm_serial_port_queue_command_cached
> (port,
> > "+GMI", 3,
> > > get_manufacturer_done, info);
> > > mm_serial_port_queue_command_cached
> (port,
> > "+GMM", 3,
> > > get_model_done, info);
> > > mm_serial_port_queue_command_cached
> (port,
> > "+GMR", 3,
> > > get_version_done, info);
> > > @@ -867,6 +877,10 @@ get_signal_quality
> (MMModemCdma
> > *modem,
> > > }
> > >
> > > info = mm_callback_info_uint_new
> (MM_MODEM
> > (modem), callback,
> > > user_data);
> > > + if (!mm_serial_port_open (port,
> &info->error))
> > {
> > > + g_assert (info->error);
> > > + /* TODO(jglasgow): what should we
> do? */
> > > + }
> > > mm_serial_port_queue_command (port,
> "+CSQ", 3,
> > > get_signal_quality_done, info);
> > > }
> > >
> > > @@ -913,6 +927,10 @@ get_esn (MMModemCdma
> *modem,
> > > }
> > >
> > > info = mm_callback_info_string_new
> (MM_MODEM
> > (modem), callback,
> > > user_data);
> > > + if (!mm_serial_port_open (port,
> &info->error))
> > {
> > > + g_assert (info->error);
> > > + /* TODO(jglasgow): what should we
> do? */
> > > + }
> > > mm_serial_port_queue_command_cached
> (port,
> > "+GSN", 3,
> > > get_string_done, info);
> > > }
> > >
> > > @@ -1136,6 +1154,11 @@ get_serving_system
> > (MMModemCdma *modem,
> > >
> G_CALLBACK
> > (callback),
> > >
> user_data);
> > >
> > > + if (!mm_serial_port_open (port,
> &info->error))
> > {
> > > + g_assert (info->error);
> > > + /* TODO(jglasgow): what should we
> do? */
> > > + }
> > > +
> > > mm_serial_port_queue_command (port,
> "+CSS?", 3,
> > > serving_system_done, info);
> > > }
> > >
> > > @@ -1380,6 +1403,12 @@
> get_registration_state
> > (MMModemCdma *modem,
> > > }
> > >
> > > info =
> >
> mm_generic_cdma_query_reg_state_callback_info_new
> > > (MM_GENERIC_CDMA (modem), callback,
> user_data);
> > > +
> > > + if (!mm_serial_port_open (port,
> &info->error))
> > {
> > > + g_assert (info->error);
> > > + /* TODO(jglasgow): what should we
> do? */
> > > + }
> > > +
> > > mm_serial_port_queue_command (port,
> "+CAD?", 3,
> > > get_analog_digital_done, info);
> > > }
> > >
> > > On Thu, Mar 11, 2010 at 6:46 PM, Dan
> Williams
> > <
dcbw redhat com> wrote:
> > > On Wed, 2010-03-10 at 18:03 -0500,
> Jason
> > Glasgow wrote:
> > > > I've been working with a Novatel
> Modem on
> > a 2.6.31 kernel
> > > using the
> > > > generic CDMA driver. If I
> enable the
> > modem via
> > > ModemManager and then
> > > > connect, everything works fine.
> But if I
> > disconnect the
> > > modem using
> > > > the DBUS API, and shut down ppp,
> > ModemManager gets
> > > confused. The
> > > > internal modem state indicates
> that the
> > modem is now
> > > REGISTERED, but
> > > > the kernel appears to have sent
> a hangup
> > (G_IO_HUP) to the
> > > usb port,
> > > > so mm-serial-port.c has closed
> the port
> > (->fd == -1).
> > >
> > >
> > > Does the modem crash at that
> point, or drop
> > off the bus? This
> > > may
> > > indicate a USB driver problem or
> just a bug
> > in ModemManager.
> > > But
> > > normally with serial ports, when
> you get a
> > hangup, you're
> > > done.
> > >
> > > Also, what specific novatel
> device?
> > >
> > > Dan
> > >
> > > >
> > > > Other than Disable(), no command
> works
> > because the ->fd is
> > > now -1.
> > > >
> > > >
> > > > Do you have any thoughts on the
> best way
> > to fix this? And
> > > what the
> > > > semantics of receiving a HUP on
> the modem
> > port should be.
> > > My thought
> > > > is that disconnect() should
> leave the
> > modem in a registered
> > > (or
> > > > enabled) state, and that fp
> should still
> > be valid.
> > > > * Might it be reasonable
> to ignore
> > the G_IO_HUP?
> > > > * Should we automatically
> reopen
> > then port for all
> > > commands that
> > > > are issued? Seems like
> a bad
> > idea.
> > > > * Should we automatically
> reopen the
> > port if
> > > > mm_modem_get_state() >
> > MM_MODEM_STATE_ENABLED?
> > > > * Maybe the most logical
> is to have
> > G_IO_HUP invoke a
> > > callback
> > > > to notify the code that
> originally
> > opened the serial
> > > port that
> > > > it has been closed. It
> then can
> > update the state of
> > > the modem
> > > > appropriately.
> > > > Thanks for your thoughts,
> > > > Jason
> > >
>
>
>
>
>
