Re: Re:Re:Why Networkmanager gets AP need several time?
- From: Dan Williams <dcbw redhat com>
- To: "tommy.hong" <hongjiujing 126 com>
- Cc: networkmanager-list <networkmanager-list gnome org>
- Subject: Re: Re:Re:Why Networkmanager gets AP need several time?
- Date: Mon, 02 Nov 2009 13:12:33 -0800
On Mon, 2009-11-02 at 18:27 +0800, tommy.hong wrote:
>
> root localhost:/# time NetworkManager --no-daemon
> NetworkManager: <info> starting...
> NetworkManager: <info> starting...
It looks like two copies of NM are getting started there. Not sure
where that's coming from, but it's wrong. NM itself doesn't do that;
maybe 'time' does somehow?
Dan
> ifup: interface lo already configured
> ** Message: NM appeared
> NetworkManager: <info> (eth0): driver 'dm9000' does not support
> carrier detection.
> You must switch to it manually.
> NetworkManager: <info> (eth0): driver 'dm9000' does not support
> carrier detection.
> You must switch to it manually.
>
> NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000')
> NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000')
>
> NetworkManager: <info> (eth0): exported
> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa
> NetworkManager: <info> (eth0): exported
> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa
>
> NetworkManager: <info> (ra0): driver does not support SSID scans
> (scan_capa 0x00).
> NetworkManager: <info> (ra0): driver does not support SSID scans
> (scan_capa 0x00).
>
> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb')
> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb')
>
> NetworkManager: <info> (ra0): exported
> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0
> NetworkManager: <info> (ra0): exported
> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0
>
> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3
> serial_device: /dev/s3c_serial3, driver: s3c-uart
> ttyname: s3c_serial3
> sysfs_path get udev
> proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3
> libudev: 1, gsm: 0, cdma: 0
> hal get : gsm: 0, cdma: 0
> NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile
> broadband capabilties
> NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile
> broadband capabilties
>
> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2
> serial_device: /dev/s3c_serial2, driver: s3c-uart
> ttyname: s3c_serial2
> sysfs_path get udev
> proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2
> libudev: 1, gsm: 0, cdma: 0
> hal get : gsm: 0, cdma: 0
> NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile
> broadband capabilties
> NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile
> broadband capabilties
>
> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1
> serial_device: /dev/s3c_serial1, driver: s3c-uart
> ttyname: s3c_serial1
> sysfs_path get udev
> proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1
> libudev: 1, gsm: 0, cdma: 0
> hal get : gsm: 0, cdma: 0
> NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile
> broadband capabilties
> NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile
> broadband capabilties
>
> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0
> serial_device: /dev/s3c_serial0, driver: s3c-uart
> ttyname: s3c_serial0
> sysfs_path get udev
> proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0
> libudev: 1, gsm: 0, cdma: 0
> hal get : gsm: 0, cdma: 0
> NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile
> broadband capabilties
> NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile
> broadband capabilties
>
> NetworkManager: <info> Trying to start the system settings daemon...
> NetworkManager: <info> Trying to start the system settings daemon...
>
> NetworkManager: <info> (eth0): device state change: 1 -> 2
> NetworkManager: <info> (eth0): device state change: 1 -> 2
> eth0: link down
>
> NetworkManager: <info> (eth0): bringing up device.
> NetworkManager: <info> (eth0): bringing up device.
>
> NetworkManager: <info> (eth0): preparing device.
> NetworkManager: <info> (eth0): preparing device.
>
> NetworkManager: <info> (eth0): deactivating device (reason: 2).
> NetworkManager: <info> (eth0): deactivating device (reason: 2).
>
> NetworkManager: <info> (ra0): device state change: 1 -> 2
> NetworkManager: <info> (ra0): device state change: 1 -> 2
>
> NetworkManager: <info> (ra0): bringing up device.
> NetworkManager: <info> (ra0): bringing up device.
>
> eth0: link up, 10Mbps, half-duplex, lpa 0x0021
> <-- RTMPAllocTxRxRingMemory, Status=0
> -->RTUSBVenderReset
> <--RTUSBVenderReset
> Key1Str is Invalid key length(0) or Type(0)
> Key2Str is Invalid key length(0) or Type(0)
> Key3Str is Invalid key length(0) or Type(0)
> Key4Str is Invalid key length(0) or Type(0)
> 1. Phy Mode = 9
> 2. Phy Mode = 9
> 3. Phy Mode = 9
> RTMPSetPhyMode: channel is out of range, use first channel=1
> MCS Set = ff 00 00 00 01
> <==== rt28xx_init, Status=0
> 0x1300 = 00064300
> NetworkManager: <info> (ra0): preparing device.
> NetworkManager: <info> (ra0): preparing device.
>
> NetworkManager: <info> (ra0): deactivating device (reason: 2).
> NetworkManager: <info> (ra0): deactivating device (reason: 2).
>
> NetworkManager: <info> (eth0): device state change: 2 -> 3
> NetworkManager: <info> (eth0): device state change: 2 -> 3
>
> NetworkManager: <info> (ra0): device state change: 2 -> 3
> NetworkManager: <info> (ra0): device state change: 2 -> 3
>
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0):
> supplicant interface state: starting -> ready
> NetworkManager: <info> (ra0): supplicant interface state: starting
> -> ready
>
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> power off backlight
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666
> NetworkManager: <info> Activation (ra0) starting connection 'Auto
> midfun'
> NetworkManager: <info> Activation (ra0) starting connection 'Auto
> midfun'
>
> NetworkManager: <info> (ra0): device state change: 3 -> 4
> NetworkManager: <info> (ra0): device state change: 3 -> 4
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> scheduled...
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> started...
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> started...
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) scheduled...
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> complete.
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> complete.
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) starting...
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) starting...
>
> NetworkManager: <info> (ra0): device state change: 4 -> 5
> NetworkManager: <info> (ra0): device state change: 4 -> 5
>
> NetworkManager: <info> Activation (ra0/wireless): access point 'Auto
> midfun' has security, but secrets are required.
> NetworkManager: <info> Activation (ra0/wireless): access point 'Auto
> midfun' has security, but secrets are required.
>
> NetworkManager: <info> (ra0): device state change: 5 -> 6
> NetworkManager: <info> (ra0): device state change: 5 -> 6
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) complete.
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) complete.
>
>
> ** (nm-applet:1964): WARNING **: <WARN> nm_gconf_get_keyring_items():
> key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk
>
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> scheduled...
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> started...
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> started...
>
> NetworkManager: <info> (ra0): device state change: 6 -> 4
> NetworkManager: <info> (ra0): device state change: 6 -> 4
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) scheduled...
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> complete.
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare)
> complete.
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) starting...
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) starting...
>
> NetworkManager: <info> (ra0): device state change: 4 -> 5
> NetworkManager: <info> (ra0): device state change: 4 -> 5
>
> NetworkManager: <info> Activation (ra0/wireless): connection 'Auto
> midfun' has security, and secrets exist. No new secrets needed.
> NetworkManager: <info> Activation (ra0/wireless): connection 'Auto
> midfun' has security, and secrets exist. No new secrets needed.
>
> NetworkManager: <info> Config: added 'ssid' value 'midfun'
> NetworkManager: <info> Config: added 'ssid' value 'midfun'
>
> NetworkManager: <info> Config: added 'scan_ssid' value '1'
> NetworkManager: <info> Config: added 'scan_ssid' value '1'
>
> NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK'
> NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK'
>
> NetworkManager: <info> Config: added 'psk' value '<omitted>'
> NetworkManager: <info> Config: added 'psk' value '<omitted>'
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) complete.
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) complete.
>
> NetworkManager: <info> Config: set interface ap_scan to 1
> NetworkManager: <info> Config: set interface ap_scan to 1
>
> NetworkManager: <info> (ra0): supplicant connection state: scanning
> -> disconnected
> NetworkManager: <info> (ra0): supplicant connection state: scanning
> -> disconnected
>
> NetworkManager: <info> (ra0): supplicant connection state:
> disconnected -> scanning
> NetworkManager: <info> (ra0): supplicant connection state:
> disconnected -> scanning
>
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666
> ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
> Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' freq=2437
> MHz)
> NetworkManager: <info> (ra0): supplicant connection state: scanning
> -> associating
> NetworkManager: <info> (ra0): supplicant connection state: scanning
> -> associating
>
> Associated with 00:1c:b0:91:6e:8c
> NetworkManager: <info> (ra0): supplicant connection state:
> associating -> associated
> NetworkManager: <info> (ra0): supplicant connection state:
> associating -> associated
>
> NetworkManager: <info> (ra0): supplicant connection state:
> associated -> 4-way handshake
> NetworkManager: <info> (ra0): supplicant connection state:
> associated -> 4-way handshake
>
> NetworkManager: <info> (ra0): supplicant connection state: 4-way
> handshake -> group handshake
> NetworkManager: <info> (ra0): supplicant connection state: 4-way
> handshake -> group handshake
>
> WPA: Key negotiation completed with 00:1c:b0:91:6e:8c [PTK=CCMP
> GTK=TKIP]
> CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c completed
> (auth) [id=0 id_str=]
> NetworkManager: <info> (ra0): supplicant connection state: group
> handshake -> completed
> NetworkManager: <info> (ra0): supplicant connection state: group
> handshake -> completed
>
> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device
> Configure) successful. Connected to wireless network 'midfun'.
> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device
> Configure) successful. Connected to wireless network 'midfun'.
>
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure
> Start) scheduled.
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure
> Start) scheduled.
>
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure
> Start) started...
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure
> Start) started...
>
> NetworkManager: <info> (ra0): device state change: 5 -> 7
> NetworkManager: <info> (ra0): device state change: 5 -> 7
>
> NetworkManager: <info> Activation (ra0) Beginning DHCP transaction.
> NetworkManager: <info> Activation (ra0) Beginning DHCP transaction.
>
> Internet Systems Consortium DHCP Client V3.0.2
> Copyright 2004 Internet Systems Consortium.
> All rights reserved.
> For info, please visit http://www.isc.org/products/DHCP
>
> NetworkManager: <info> dhclient started with pid 2106
> NetworkManager: <info> dhclient started with pid 2106
>
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure
> Start) complete.
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure
> Start) complete.
>
> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or
> directory
> NetworkManager: <info> DHCP: device ra0 state changed (null) ->
> preinit
> NetworkManager: <info> DHCP: device ra0 state changed (null) ->
> preinit
>
> Listening on LPF/ra0/00:03:19:94:00:4c
> Sending on LPF/ra0/00:03:19:94:00:4c
> Sending on Socket/fallback
>
>
> NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting
> down normally.
> NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting
> down normally.
>
> NetworkManager: <info> (eth0): now unmanaged
> NetworkManager: <info> (eth0): now unmanaged
>
> NetworkManager: <info> (eth0): device state change: 3 -> 1
> NetworkManager: <info> (eth0): device state change: 3 -> 1
>
> NetworkManager: <info> (eth0): cleaning up...
> NetworkManager: <info> (eth0): cleaning up...
>
> NetworkManager: <info> (eth0): taking down device.
> NetworkManager: <info> (eth0): taking down device.
>
> NetworkManager: <info> (ra0): now unmanaged
> NetworkManager: <info> (ra0): now unmanaged
>
> NetworkManager: <info> (ra0): device state change: 7 -> 1
> NetworkManager: <info> (ra0): device state change: 7 -> 1
>
> NetworkManager: <info> (ra0): deactivating device (reason: 36).
> NetworkManager: <info> (ra0): deactivating device (reason: 36).
>
> NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client
> pid 2106
> NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client
> pid 2106
>
> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> NetworkManager: <info> (ra0): cleaning up...
> NetworkManager: <info> (ra0): cleaning up...
>
> NetworkManager: <info> (ra0): taking down device.
> NetworkManager: <info> (ra0): taking down device.
>
> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> Terminate the task(RtmpMlmeTask) with pid(2104)!
> Terminate the task(RtmpCmdQTask) with pid(2105)!
> Terminate the task(RtmpTimerTask) with pid(2103)!
> ---> RTMPFreeTxRxRingMemory
> <--- RTMPFreeTxRxRingMemory
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> ioctl[SIOCSIWENCODEEXT]: Network is down
> l2_packet_receive - recvfrom: Network is down
> ioctl[SIOCSIWAUTH]: Network is down
> WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
> ioctl[SIOCSIWAUTH]: Network is down
> WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Network is down
> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: Network is down
> NetworkManager: <info> exiting (success)
> NetworkManager: <info> exiting (success)
>
>
> ** (nm-applet:1964): WARNING **: _nm_object_get_property: Error
> getting 'ActiveAccessPoint'
> for /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0: Message
> did not receive a reply (timeout by message bus)
>
> real 1m 59.86s
> user 0m 0.48s
> sys 0m 0.21s
> root localhost:/# ** Message: NM disappeared
>
>
>
>
>
> 在2009-11-02 18:23:50,"tommy.hong" <hongjiujing 126 com> 写道:
>
> root localhost:/# NetworkManager --no-daemon
> NetworkManager: <info> starting...
> NetworkManager: <info> starting...
>
> ifup: interface lo already configured
> NetworkManager: <info> (eth0): driver 'dm9000' does not
> support carrier detection.
> You must switch to it manually.
> NetworkManager: <info> (eth0): driver 'dm9000' does not
> support carrier detection.
> You must switch to it manually.
>
> NetworkManager: <info> (eth0): new Ethernet device (driver:
> 'dm9000')
> NetworkManager: <info> (eth0): new Ethernet device (driver:
> 'dm9000')
>
> NetworkManager: <info> (eth0): exported
> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa
> NetworkManager: <info> (eth0): exported
> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa
>
> NetworkManager: <info> (ra0): driver does not support SSID
> scans (scan_capa 0x00).
> NetworkManager: <info> (ra0): driver does not support SSID
> scans (scan_capa 0x00).
>
> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver:
> 'usb')
> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver:
> 'usb')
>
> NetworkManager: <info> (ra0): exported
> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0
> NetworkManager: <info> (ra0): exported
> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0
>
> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3
> serial_device: /dev/s3c_serial3, driver: s3c-uart
> ttyname: s3c_serial3
> sysfs_path get udev
> proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3
> libudev: 1, gsm: 0, cdma: 0
> hal get : gsm: 0, cdma: 0
> NetworkManager: <info> (s3c_serial3): ignoring due to lack of
> mobile broadband capabilties
> NetworkManager: <info> (s3c_serial3): ignoring due to lack of
> mobile broadband capabilties
>
> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2
> serial_device: /dev/s3c_serial2, driver: s3c-uart
> ttyname: s3c_serial2
> sysfs_path get udev
> proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2
> libudev: 1, gsm: 0, cdma: 0
> hal get : gsm: 0, cdma: 0
> NetworkManager: <info> (s3c_serial2): ignoring due to lack of
> mobile broadband capabilties
> NetworkManager: <info> (s3c_serial2): ignoring due to lack of
> mobile broadband capabilties
>
> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1
> serial_device: /dev/s3c_serial1, driver: s3c-uart
> ttyname: s3c_serial1
> sysfs_path get udev
> proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1
> libudev: 1, gsm: 0, cdma: 0
> hal get : gsm: 0, cdma: 0
> NetworkManager: <info> (s3c_serial1): ignoring due to lack of
> mobile broadband capabilties
> NetworkManager: <info> (s3c_serial1): ignoring due to lack of
> mobile broadband capabilties
>
> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0
> serial_device: /dev/s3c_serial0, driver: s3c-uart
> ttyname: s3c_serial0
> sysfs_path get udev
> proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0
> libudev: 1, gsm: 0, cdma: 0
> hal get : gsm: 0, cdma: 0
> NetworkManager: <info> (s3c_serial0): ignoring due to lack of
> mobile broadband capabilties
> NetworkManager: <info> (s3c_serial0): ignoring due to lack of
> mobile broadband capabilties
>
> NetworkManager: <info> Trying to start the system settings
> daemon...
> NetworkManager: <info> Trying to start the system settings
> daemon...
>
> ** Message: NM appeared
> NetworkManager: <info> (eth0): device state change: 1 -> 2
> NetworkManager: <info> (eth0): device state change: 1 -> 2
>
> NetworkManager: <info> (eth0): preparing device.
> NetworkManager: <info> (eth0): preparing device.
>
> NetworkManager: <info> (eth0): deactivating device (reason:
> 2).
> NetworkManager: <info> (eth0): deactivating device (reason:
> 2).
>
> NetworkManager: <info> (eth0): device state change: 2 -> 3
> NetworkManager: <info> (eth0): device state change: 2 -> 3
>
> NetworkManager: <info> (ra0): device state change: 1 -> 2
> NetworkManager: <info> (ra0): device state change: 1 -> 2
>
> NetworkManager: <info> (ra0): bringing up device.
> NetworkManager: <info> (ra0): bringing up device.
>
> <-- RTMPAllocTxRxRingMemory, Status=0
> -->RTUSBVenderReset
> <--RTUSBVenderReset
> Key1Str is Invalid key length(0) or Type(0)
> Key2Str is Invalid key length(0) or Type(0)
> Key3Str is Invalid key length(0) or Type(0)
> Key4Str is Invalid key length(0) or Type(0)
> 1. Phy Mode = 9
> 2. Phy Mode = 9
> 3. Phy Mode = 9
> RTMPSetPhyMode: channel is out of range, use first channel=1
> MCS Set = ff 00 00 00 01
> <==== rt28xx_init, Status=0
> 0x1300 = 00064300
> NetworkManager: <info> (ra0): preparing device.
> NetworkManager: <info> (ra0): preparing device.
>
> NetworkManager: <info> (ra0): deactivating device (reason:
> 2).
> NetworkManager: <info> (ra0): deactivating device (reason:
> 2).
>
> NetworkManager: <info> (ra0): device state change: 2 -> 3
> NetworkManager: <info> (ra0): device state change: 2 -> 3
>
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0):
> supplicant interface state: starting -> ready
> NetworkManager: <info> (ra0): supplicant interface state:
> starting -> ready
>
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> power off backlight
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666
> NetworkManager: <info> Activation (ra0) starting connection
> 'Auto midfun'
> NetworkManager: <info> Activation (ra0) starting connection
> 'Auto midfun'
>
> NetworkManager: <info> (ra0): device state change: 3 -> 4
> NetworkManager: <info> (ra0): device state change: 3 -> 4
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) scheduled...
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) started...
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) started...
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) scheduled...
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) complete.
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) complete.
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) starting...
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) starting...
>
> NetworkManager: <info> (ra0): device state change: 4 -> 5
> NetworkManager: <info> (ra0): device state change: 4 -> 5
>
> NetworkManager: <info> Activation (ra0/wireless): access
> point 'Auto midfun' has security, but secrets are required.
> NetworkManager: <info> Activation (ra0/wireless): access
> point 'Auto midfun' has security, but secrets are required.
>
> NetworkManager: <info> (ra0): device state change: 5 -> 6
> NetworkManager: <info> (ra0): device state change: 5 -> 6
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) complete.
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) complete.
>
>
> ** (nm-applet:1964): WARNING **: <WARN>
> nm_gconf_get_keyring_items():
> key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk
>
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) scheduled...
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) started...
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) started...
>
> NetworkManager: <info> (ra0): device state change: 6 -> 4
> NetworkManager: <info> (ra0): device state change: 6 -> 4
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) scheduled...
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) complete.
> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device
> Prepare) complete.
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) starting...
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) starting...
>
> NetworkManager: <info> (ra0): device state change: 4 -> 5
> NetworkManager: <info> (ra0): device state change: 4 -> 5
>
> NetworkManager: <info> Activation (ra0/wireless): connection
> 'Auto midfun' has security, and secrets exist. No new secrets
> needed.
> NetworkManager: <info> Activation (ra0/wireless): connection
> 'Auto midfun' has security, and secrets exist. No new secrets
> needed.
>
> NetworkManager: <info> Config: added 'ssid' value 'midfun'
> NetworkManager: <info> Config: added 'ssid' value 'midfun'
>
> NetworkManager: <info> Config: added 'scan_ssid' value '1'
> NetworkManager: <info> Config: added 'scan_ssid' value '1'
>
> NetworkManager: <info> Config: added 'key_mgmt' value
> 'WPA-PSK'
> NetworkManager: <info> Config: added 'key_mgmt' value
> 'WPA-PSK'
>
> NetworkManager: <info> Config: added 'psk' value '<omitted>'
> NetworkManager: <info> Config: added 'psk' value '<omitted>'
>
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) complete.
> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device
> Configure) complete.
>
> NetworkManager: <info> Config: set interface ap_scan to 1
> NetworkManager: <info> Config: set interface ap_scan to 1
>
> NetworkManager: <info> (ra0): supplicant connection state:
> scanning -> disconnected
> NetworkManager: <info> (ra0): supplicant connection state:
> scanning -> disconnected
>
> NetworkManager: <info> (ra0): supplicant connection state:
> disconnected -> scanning
> NetworkManager: <info> (ra0): supplicant connection state:
> disconnected -> scanning
>
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 490
> ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
> Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun'
> freq=2437 MHz)
> NetworkManager: <info> (ra0): supplicant connection state:
> scanning -> associating
> NetworkManager: <info> (ra0): supplicant connection state:
> scanning -> associating
>
> Associated with 00:1c:b0:91:6e:8c
> NetworkManager: <info> (ra0): supplicant connection state:
> associating -> associated
> NetworkManager: <info> (ra0): supplicant connection state:
> associating -> associated
>
> NetworkManager: <info> (ra0): supplicant connection state:
> associated -> 4-way handshake
> NetworkManager: <info> (ra0): supplicant connection state:
> associated -> 4-way handshake
>
> NetworkManager: <info> (ra0): supplicant connection state:
> 4-way handshake -> group handshake
> NetworkManager: <info> (ra0): supplicant connection state:
> 4-way handshake -> group handshake
>
> WPA: Key negotiation completed with 00:1c:b0:91:6e:8c
> [PTK=CCMP GTK=TKIP]
> CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c
> completed (auth) [id=0 id_str=]
> NetworkManager: <info> (ra0): supplicant connection state:
> group handshake -> completed
> NetworkManager: <info> (ra0): supplicant connection state:
> group handshake -> completed
>
> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5
> (Device Configure) successful. Connected to wireless network
> 'midfun'.
> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5
> (Device Configure) successful. Connected to wireless network
> 'midfun'.
>
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP
> Configure Start) scheduled.
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP
> Configure Start) scheduled.
>
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP
> Configure Start) started...
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP
> Configure Start) started...
>
> NetworkManager: <info> (ra0): device state change: 5 -> 7
> NetworkManager: <info> (ra0): device state change: 5 -> 7
>
> NetworkManager: <info> Activation (ra0) Beginning DHCP
> transaction.
> NetworkManager: <info> Activation (ra0) Beginning DHCP
> transaction.
>
> NetworkManager: <info> dhclient started with pid 2044
> NetworkManager: <info> dhclient started with pid 2044
>
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP
> Configure Start) complete.
> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP
> Configure Start) complete.
>
> Internet Systems Consortium DHCP Client V3.0.2
> Copyright 2004 Internet Systems Consortium.
> All rights reserved.
> For info, please visit http://www.isc.org/products/DHCP
>
> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file
> or directory
> NetworkManager: <info> DHCP: device ra0 state changed (null)
> -> preinit
> NetworkManager: <info> DHCP: device ra0 state changed (null)
> -> preinit
>
> Listening on LPF/ra0/00:03:19:94:00:4c
> Sending on LPF/ra0/00:03:19:94:00:4c
> Sending on Socket/fallback
> DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 7
> DHCPOFFER from 192.168.1.2
> DHCPREQUEST on ra0 to 255.255.255.255 port 67
> DHCPACK from 192.168.1.2
> NetworkManager: <info> DHCP: device ra0 state changed preinit
> -> bound
> NetworkManager: <info> DHCP: device ra0 state changed preinit
> -> bound
>
> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP
> Configure Get) scheduled...
> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP
> Configure Get) scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP
> Configure Get) started...
> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP
> Configure Get) started...
>
> NetworkManager: <info> address 192.168.1.114
> NetworkManager: <info> address 192.168.1.114
>
> NetworkManager: <info> prefix 24 (255.255.255.0)
> NetworkManager: <info> prefix 24 (255.255.255.0)
>
> NetworkManager: <info> gateway 192.168.1.2
> NetworkManager: <info> gateway 192.168.1.2
>
> NetworkManager: <info> nameserver '192.168.1.2'
> NetworkManager: <info> nameserver '192.168.1.2'
>
> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP
> Configure Commit) scheduled...
> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP
> Configure Commit) scheduled...
>
> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP
> Configure Get) complete.
> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP
> Configure Get) complete.
>
> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file
> or directory
> bound to 192.168.1.114 -- renewal in 40639 seconds.
> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP
> Configure Commit) started...
> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP
> Configure Commit) started...
>
> NetworkManager: <info> (ra0): device state change: 7 -> 8
> NetworkManager: <info> (ra0): device state change: 7 -> 8
>
> NetworkManager: <info> Policy set 'Auto midfun' (ra0) as
> default for routing and DNS.
> NetworkManager: <info> Policy set 'Auto midfun' (ra0) as
> default for routing and DNS.
>
> NetworkManager: <info> Activation (ra0) successful, device
> activated.
> NetworkManager: <info> Activation (ra0) successful, device
> activated.
>
> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP
> Configure Commit) complete.
> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP
> Configure Commit) complete.
>
> NetworkManager: <info> Trying to start the system settings
> daemon...
> NetworkManager: <info> Trying to start the system settings
> daemon...
>
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666
>
>
>
>
> 在2009-11-02 17:33:31,"tommy.hong" <hongjiujing 126 com> 写
> 道:
>
> Platform :arm11
> Networkmanager version :networkmanager 0.7.1
>
> Linux kerne:2.6.24.2
>
> USB wifi :rtl3070
>
> Why Networkmanager gets AP need several time?
>
>
>
> root localhost:/# /etc/init.d/NetworkManager restart
> Stopping NetworkManager daemon: NetworkManagersh: you
> need to specify whom to kill
> .
> CTRL-EVENT-TERMINATING - signal 15 received
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 -
> Starting NetworkManager daemon:
> NetworkManagerdbus_bus_request_name[dbus]: Resource
> temporarily unavailable
> Could not request DBus service name: already
> registered.
> Failed to initialize wpa_supplicant
> .
> root localhost:/# Terminate the task(RtmpMlmeTask)
> with pid(2131)!
> Terminate the task(RtmpCmdQTask) with pid(2132)!
> Terminate the task(RtmpTimerTask) with pid(2130)!
> ---> RTMPFreeTxRxRingMemory
> <--- RTMPFreeTxRxRingMemory
> ** Message: NM appeared
> \
> >
> root localhost:/# <-- RTMPAllocTxRxRingMemory,
> Status=0
> -->RTUSBVenderReset
> <--RTUSBVenderReset
>
> root localhost:/#
> root localhost:/#
> root localhost:/#
> root localhost:/# Key1Str is Invalid key length(0) or
> Type(0)
> Key2Str is Invalid key length(0) or Type(0)
> Key3Str is Invalid key length(0) or Type(0)
> Key4Str is Invalid key length(0) or Type(0)
> 1. Phy Mode = 9
> 2. Phy Mode = 9
> 3. Phy Mode = 9
> RTMPSetPhyMode: channel is out of range, use first
> channel=1
> MCS Set = ff 00 00 00 01
>
> RTMPFilterCalibration - can't find a valid value,
> loopcnt=102 stop calibrating<==== rt28xx_init,
> Status=0
> 0x1300 = 00064300
>
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>
>
> need several minutes to get AP!
>
> but :
>
> root localhost:/new3gdriver/image/sbin# ./iwlist ra0
> scanning
> ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length
> = 766
> ra0 Scan completed :
> Cell 01 - Address: 00:14:78:CB:E7:06
> Protocol:802.11b/g
> ESSID:"XIZIIUK-NJ"
> Mode:Managed
> Channel:6
> Quality:13/100 Signal level:-85
> dBm Noise level:-115 dBm
> Encryption key:on
> Bit Rates:36 Mb/s
> IE: WPA Version 1
> Group Cipher : TKIP
> Pairwise Ciphers (2) : TKIP
> CCMP
> Authentication Suites (1) :
> PSK
> IE: IEEE 802.11i/WPA2 Version 1
> Group Cipher : TKIP
> Pairwise Ciphers (2) : TKIP
> CCMP
> Authentication Suites (1) :
> PSK
> Preauthentication Supported
> Cell 02 - Address: 00:23:CD:48:D6:6A
> Protocol:802.11b/g
> ESSID:"TP-LINK_48D66A"
> Mode:Managed
> Channel:6
> Quality:7/100 Signal level:-87
> dBm Noise level:-115 dBm
> Encryption key:on
> Bit Rates:36 Mb/s
> Cell 03 - Address: 00:1C:B0:91:6E:8C
> Protocol:802.11g
> ESSID:"xxxx"
> Mode:Managed
> Channel:6
> Quality:63/100 Signal level:-65
> dBm Noise level:-115 dBm
> Encryption key:on
> Bit Rates:11 Mb/s
> IE: WPA Version 1
> Group Cipher : TKIP
> Pairwise Ciphers (2) : TKIP
> CCMP
> Authentication Suites (1) :
> PSK
> IE: IEEE 802.11i/WPA2 Version 1
> Group Cipher : TKIP
> Pairwise Ciphers (2) : TKIP
> CCMP
> Authentication Suites (1) :
> PSK
> Cell 04 - Address: 00:23:CD:E7:F3:9E
> Protocol:802.11b/g
> ESSID:"TP-123"
> Mode:Managed
> Channel:6
> Quality:0/100 Signal level:-91
> dBm Noise level:-115 dBm
> Encryption key:on
> Bit Rates:36 Mb/s
> Cell 05 - Address: 02:80:D1:C8:32:12
> Protocol:802.11b
> ESSID:"axel"
> Mode:Ad-Hoc
> Channel:11
> Quality:7/100 Signal level:-87
> dBm Noise level:-115 dBm
> Encryption key:off
> Bit Rates:11 Mb/s
> Cell 06 - Address: 02:1B:77:00:00:C8
> Protocol:802.11b/g
> ESSID:"LocalGroup"
> Mode:Ad-Hoc
> Channel:11
> Quality:13/100 Signal level:-85
> dBm Noise level:-115 dBm
> Encryption key:off
> Bit Rates:11 Mb/s
>
> can get AP quickly ?
>
>
> I guess it is a driver or H/W issue ?
>
> Tommy
>
>
>
>
>
>
>
>
>
>
>
>
> ______________________________________________________
> 09年新晋3D主流网游《天下贰》,网易六年亿资打造
>
>
>
> ______________________________________________________________
> 09年新晋3D主流网游《天下贰》,网易六年亿资打造
>
>
>
> ______________________________________________________________________
> "雪见"杨幂邀你共品3D国韵网游《天下贰》,海报免费领
> _______________________________________________
> NetworkManager-list mailing list
> NetworkManager-list gnome org
> http://mail.gnome.org/mailman/listinfo/networkmanager-list
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]