Why Networkmanager gets AP need several time?
- From: "tommy.hong" <hongjiujing 126 com>
- To: networkmanager-list <networkmanager-list gnome org>
- Subject: Why Networkmanager gets AP need several time?
- Date: Mon, 2 Nov 2009 17:33:31 +0800 (CST)
Platform :arm11
Networkmanager version :networkmanager 0.7.1
Linux kerne:2.6.24.2
USB wifi :rtl3070
Why Networkmanager gets AP need several time?
root localhost:/# /etc/init.d/NetworkManager restart
Stopping NetworkManager daemon: NetworkManagersh: you need to specify whom to kill
.
CTRL-EVENT-TERMINATING - signal 15 received
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 -
Starting NetworkManager daemon: NetworkManagerdbus_bus_request_name[dbus]: Resource temporarily unavailable
Could not request DBus service name: already registered.
Failed to initialize wpa_supplicant
.
root localhost:/# Terminate the task(RtmpMlmeTask) with pid(2131)!
Terminate the task(RtmpCmdQTask) with pid(2132)!
Terminate the task(RtmpTimerTask) with pid(2130)!
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
** Message: NM appeared
\
>
root localhost:/# <-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
root localhost:/#
root localhost:/#
root localhost:/#
root localhost:/# Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 9
2. Phy Mode = 9
3. Phy Mode = 9
RTMPSetPhyMode: channel is out of range, use first channel=1
MCS Set = ff 00 00 00 01
RTMPFilterCalibration - can't find a valid value, loopcnt=102 stop calibrating<==== rt28xx_init, Status=0
0x1300 = 00064300
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
need several minutes to get AP!
but :
root localhost:/new3gdriver/image/sbin# ./iwlist ra0 scanning
===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 766
ra0 Scan completed :
Cell 01 - Address: 00:14:78:CB:E7:06
Protocol:802.11b/g
ESSID:"XIZIIUK-NJ"
Mode:Managed
Channel:6
Quality:13/100 Signal level:-85 dBm Noise level:-115 dBm
Encryption key:on
Bit Rates:36 Mb/s
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Preauthentication Supported
Cell 02 - Address: 00:23:CD:48:D6:6A
Protocol:802.11b/g
ESSID:"TP-LINK_48D66A"
Mode:Managed
Channel:6
Quality:7/100 Signal level:-87 dBm Noise level:-115 dBm
Encryption key:on
Bit Rates:36 Mb/s
Cell 03 - Address: 00:1C:B0:91:6E:8C
Protocol:802.11g
ESSID:"xxxx"
Mode:Managed
Channel:6
Quality:63/100 Signal level:-65 dBm Noise level:-115 dBm
Encryption key:on
Bit Rates:11 Mb/s
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Cell 04 - Address: 00:23:CD:E7:F3:9E
Protocol:802.11b/g
ESSID:"TP-123"
Mode:Managed
Channel:6
Quality:0/100 Signal level:-91 dBm Noise level:-115 dBm
Encryption key:on
Bit Rates:36 Mb/s
Cell 05 - Address: 02:80:D1:C8:32:12
Protocol:802.11b
ESSID:"axel"
Mode:Ad-Hoc
Channel:11
Quality:7/100 Signal level:-87 dBm Noise level:-115 dBm
Encryption key:off
Bit Rates:11 Mb/s
Cell 06 - Address: 02:1B:77:00:00:C8
Protocol:802.11b/g
ESSID:"LocalGroup"
Mode:Ad-Hoc
Channel:11
Quality:13/100 Signal level:-85 dBm Noise level:-115 dBm
Encryption key:off
Bit Rates:11 Mb/s
can get AP quickly ?
I guess it is a driver or H/W issue ?
Tommy
09年新晋3D主流网游《天下贰》,网易六年亿资打造
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]