Re: nm-tool doesn't show my mobile broadband card

[Jochen Wiedmann <jochen wiedmann gmail com>]

Never mind, problem was me: I had to load the "option" driver:

  /sbin/lsmod option

Now everything works fine.



Jochen Wiedmann wrote:
> 
> Hi,
> 
> I have a so-called web'n'walk stick. I managed to have it reported not as
> a USB drive, but as a modem by using usb_modeswitch:
> 
>     [jwi mcjwi ~]$ hal-find-by-capability --capability=modem
>    
> /org/freedesktop/Hal/devices/usb_device_af0_6971_Serial_Number_if0_serial_unknown_0
>    
> /org/freedesktop/Hal/devices/usb_device_af0_6971_Serial_Number_if0_serial_unknown_1
> 
> I also have created an entry under "Mobile Broadband" using
> nm-connection-editor. However, I can't get the stick to do any dial
> attempts. A possible reason might be, that nm-tool shows the Ethernet and
> Wireless devices, but not my modem.
> 
> Any ideas, what might be wrong?
> 
> Thanks,
> 
> Jochen
> 
> Additional information:
> 
>     [jwi mcjwi ~]$ lsusb
>     ...
>     Bus 003 Device 003: ID 0af0:6971 Option 
>     ...
> 
> Matching entry from 10-modem.fdi:
> 
>      <!-- Option -->
>       <match key="@info.parent:usb.vendor_id" int="0x0af0">
>         <!-- Colt,Ricola,Ricola Light,Ricola Quad,Ricola Quad Light,Ricola
> Ndis,Ricola Ndis Light, Ricola Ndis Quad,Ricola Ndis Quad Light,
> 	     Cobra,Cobra Bus,Viper,Viper Bus,Gt Max Ready,Gt Max,Fuji Modem
> Light,Fuji Modem Gt,Fuji Modem Ex,Fuji Network Light,Fuji Network Gt,
> 	     Fuji Network Ex,Koi Modem,Koi Network,Scorpion Modem,Scorpion
> Network,Etna Modem,Globetrotter HSDPA Modem,Etna Network,Etna Modem Lite,
> Etna Modem Gt,
>              Etna Modem Ex,Etna Network Lite,Etna Network Gt,Etna Network
> Ex,Etna Koi Modem,Etna Koi Network -->
>         <match key="@info.parent:usb.product_id"
> int_outof="0x5000;0x6000;0x6100;0x6200;0x6300;0x6050;0x6150;0x6250;0x6350;0x6500;0x6501;0x6600;0x6601;0x6701;0x6711;0x6721;0x6741;0x6761;0x6731;0x6751;0x6771;0x6800;0x6811;0x6901;0x6911;0x6971;0x7001;0x7021;0x7041;0x7061;0x7031;0x7051;0x7071;0x7100;0x7111">
>           <match key="@info.parent:usb.interface.number" int="0">
>             <append key="modem.command_sets"
> type="strlist">GSM-07.07</append>
>             <append key="modem.command_sets"
> type="strlist">GSM-07.05</append>
>           </match>
>         </match>
> 
> 
> 

-- 
View this message in context: http://www.nabble.com/nm-tool-doesn%27t-show-my-mobile-broadband-card-tp23448718p23474903.html
Sent from the Gnome - NetworkManager mailing list archive at Nabble.com.