NM stops and doesn't connect



Hi

The last mail ended up blank trying this one:

Can anyone advise on this error from NM after the supplicant is up with:

Trying to associate with ************* (SSID='Thomson7F8759' freq=2412 MHz)
Associated with *************
WPA: Key negotiation completed with ************ [PTK=CCMP GTK=TKIP]
CTRL-EVENT-CONNECTED - Connection to ************ completed (auth) [id=0 id_str=]
CTRL-EVENT-SCAN-RESULTS 
CTRL-EVENT-SCAN-RESULTS 


Mar  7 14:29:50 cliffhanger NetworkManager: <info>  starting... 
Mar  7 14:29:50 cliffhanger NetworkManager: <WARN>  nm_generic_enable_loopback(): error -17 returned from rtnl_addr_add(): Sucess  
Mar  7 14:29:50 cliffhanger NetworkManager: <info>  wlan0: driver is 'iwl3945'. 
Mar  7 14:29:50 cliffhanger NetworkManager: <info>  wlan0: driver supports SSID scans (scan_capa 0x01). 
Mar  7 14:29:50 cliffhanger NetworkManager: <info>  Found new 802.11 WiFi device 'wlan0'. 
Mar  7 14:29:50 cliffhanger NetworkManager: <info>  (wlan0): exported as /org/freedesktop/Hal/devices/net_00_13_02_0d_3f_93 
Mar  7 14:29:50 cliffhanger NetworkManager: <info>  Trying to start the system settings daemon... 
Mar  7 14:29:54 cliffhanger NetworkManager: <info>  (wlan0): device state change: 1 -> 2 
Mar  7 14:29:54 cliffhanger NetworkManager: <info>  (wlan0): preparing device. 
Mar  7 14:29:54 cliffhanger NetworkManager: <info>  (wlan0): deactivating device (reason: 2). 
Mar  7 14:29:54 cliffhanger NetworkManager: <info>  Setting system hostname to 'localhost.localdomain' (no default device) 
Mar  7 14:29:54 cliffhanger NetworkManager: <info>  (wlan0): device state change: 2 -> 3 
Mar  7 14:29:54 cliffhanger NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready 
Mar  7 14:31:50 cliffhanger NetworkManager: <info>  Trying to start the system settings daemon... 
Mar  7 14:33:50 cliffhanger NetworkManager: <info>  Trying to start the system settings daemon... 
Mar  7 14:35:50 cliffhanger NetworkManager: <info>  Trying to start the system settings  
ETC ETC ETC

If I use this check 

nm-system-settings --debug --config /etc/NetworkManager/nm-system-settings.conf

I get:.

** Message: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list

the system then stops and I have to ctrl-c to bring the prompt back

What's going on?  Google mentions this error but no solution.

thanks

MAC

-- 
Be Yourself @ mail.com!
Choose From 200+ Email Addresses
Get a Free Account at www.mail.com



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]