Re: Mobile CDMA problem with my SAMSUNG phone (NM sees it as GSM?)?

[Dan Williams <dcbw redhat com>]

On Thu, 2009-01-22 at 13:53 -0500, Derek Atkins wrote:
> Dan Williams <dcbw redhat com> writes:
> 
> >> Here's what mine currently looks like (it looks somewhat different than
> >> yours):
> >> 
> >>       <!-- Samsung SGH-A707 (AT&T Sync) -->
> >>       <match key="@info.parent:usb.vendor_id" int="0x04e8">
> >>         <match key="@info.parent:usb.product_id" int="0x6601">
> >>           <match key="@info.parent:usb.interface.number" int="0">
> >>             <append key="modem.command_sets" type="strlist">GSM-07.07</append>
> >>             <append key="modem.command_sets" type="strlist">GSM-07.05</append>
> >>           </match>
> >>         </match>
> >>       </match>
> >> 
> >> Should I just swap both of those "GSM-*" entries to IS-707-A?
> >> Or should I add an info.capabilities line and make it look like yours?
> >
> > Remove one of the "modem.command_sets" items, and change the other one
> > to "IS-707-A".
> 
> BTW, I had a chance to test this out yesterday and it worked
> perfectly.  Yay!  And I can even start the VPN over it.  Yay!
> 
> Now if only I could figure out why my work wifi keeps disconnecting.
> I see things like this in my dmesg logs:
> 
> ...
> wlan0: authenticate with AP 00:1f:9e:ce:b3:21
> wlan0: authenticated
> wlan0: associate with AP 00:1f:9e:ce:b3:21
> wlan0: RX ReassocResp from 00:1f:9e:ce:b3:21 (capab=0x421 status=0 aid=1)
> wlan0: associated
> wlan0: deauthenticated
> wlan0: authenticate with AP 00:1f:9e:ce:c2:71
> wlan0: authenticate with AP 00:1f:9e:ce:c2:71
> wlan0: authenticate with AP 00:1f:9e:ce:c2:71
> wlan0: authenticate with AP 00:1f:9e:ce:c2:71
> wlan0: authentication with AP 00:1f:9e:ce:c2:71 timed out

Driver or AP problem...  Heavy RF environment?

Dan