Re: Mobile CDMA problem with my SAMSUNG phone (NM sees it as GSM?)?

[Dan Williams <dcbw redhat com>]

On Fri, 2009-01-16 at 16:23 -0500, Derek Atkins wrote:
> Dan,
> 
> Quoting Dan Williams <dcbw redhat com>:
> 
> > Looks like Samsung used the same VID/PID for the Samsung SGH-A707 (AT&T
> > Sync).  Or maybe the USB device is actually in the cable and both these
> > phones use the same cable.
> >
> > For the time being, until we push auto-probing into udev, you can
> > edit /usr/share/hal/fdi/information/10freedesktop/10-modem.fdi and
> > change the section for the Sync to be:
> >
> >      <!-- Samsung SGH-A707 (AT&T Sync) -->
> >      <match key="@info.parent:usb.vendor_id" int="0x04e8">
> >        <match key="@info.parent:usb.product_id" int="0x6601">
> >          <match key="@info.parent:usb.interface.number" int="0">
> >            <append key="info.capabilities" type="strlist">modem</append>
> >              <append key="modem.command_sets" 
> > type="strlist">IS-707-A</append>
> >          </match>
> >        </match>
> >      </match>
> >
> > The magic bit is removing the "GSM" lines and adding the "IS-707-A" line.
> 
> Here's what mine currently looks like (it looks somewhat different than
> yours):
> 
>       <!-- Samsung SGH-A707 (AT&T Sync) -->
>       <match key="@info.parent:usb.vendor_id" int="0x04e8">
>         <match key="@info.parent:usb.product_id" int="0x6601">
>           <match key="@info.parent:usb.interface.number" int="0">
>             <append key="modem.command_sets" type="strlist">GSM-07.07</append>
>             <append key="modem.command_sets" type="strlist">GSM-07.05</append>
>           </match>
>         </match>
>       </match>
> 
> Should I just swap both of those "GSM-*" entries to IS-707-A?
> Or should I add an info.capabilities line and make it look like yours?

Remove one of the "modem.command_sets" items, and change the other one
to "IS-707-A".

Dan