Re: WAN Ericsson F3507g

[Dan Williams <dcbw redhat com>]

On Thu, 2008-11-06 at 15:41 -0700, James Ward wrote:
> Thanks Dan.
> 
> Here is the output:
> NetworkManager: <info>  Activation (ttyACM0) starting connection 'Auto
> GSM network connection'
> NetworkManager: <info>  (ttyACM0): device state change: 3 -> 4
> NetworkManager: <info>  Activation (ttyACM0) Stage 1 of 5 (Device
> Prepare) scheduled...
> NetworkManager: <info>  Activation (ttyACM0) Stage 1 of 5 (Device
> Prepare) started...
> NetworkManager: <debug> [1226010840.735911] nm_serial_device_open():
> (ttyACM0) opening device...
> NetworkManager: <info>  Activation (ttyACM0) Stage 1 of 5 (Device
> Prepare) complete.
> NetworkManager: <debug> [1226010840.841058] nm_serial_debug(): Sending:
> 'ATZ E0 V1 X4 &C1 +FCLASS=0
> '
> NetworkManager: <debug> [1226010840.869797] nm_serial_debug(): Got: 'ATZ
> E0 V1 X4 &C1 +FCLASS=0
> '
> NetworkManager: <debug> [1226010840.880689] nm_serial_debug(): Got: 'ATZ
> E0 V1 X4 &C1 +FCLASS=0

This was fixed on 2008-10-26 in r4222.

Dan

> 
> ERROR
> 
> '
> NetworkManager: <WARN>  init_done(): Modem initialization failed
> NetworkManager: <info>  (ttyACM0): device state change: 4 -> 9
> NetworkManager: <debug> [1226010840.880892] nm_serial_device_close():
> Closing device 'ttyACM0'
> NetworkManager: <info>  Marking connection 'Auto GSM network connection'
> invalid.
> NetworkManager: <info>  Activation (ttyACM0) failed.
> NetworkManager: <info>  (ttyACM0): device state change: 9 -> 3
> NetworkManager: <info>  (ttyACM0): deactivating device (reason: 0).
> NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion
> `iface_idx >= 0' failed
> NetworkManager: nm_system_device_flush_ip4_addresses_with_iface:
> assertion `iface_idx >= 0' failed
> 
> 
> 
> The light on my laptop indicating that the device is on, never turned on
> using NM.  But if I do:
> cu -l /dev/ttyACM0
> 
> AT+CFUN=1
> 
> 
> Then the light does come on.
> 
> I have 0.7~~svn20081018t105859-0ubuntu2~nm4 from the PPA on Intrepid.
> 
> Thanks for your help.
> 
> -James
> 
> 
> On Thu, 2008-11-06 at 07:35 -0500, Dan Williams wrote:
> > On Wed, 2008-11-05 at 15:36 -0700, James Ward wrote:
> > > Hi,
> > > 
> > > I just recently upgraded to the Lenovo W500 laptop which has a built-in
> > > Ericsson F2507g WAN card.  Unfortunately I can't get this new card to
> > > work with NM because it needs to be turned on first.  There is a thread
> > > about how to do this manually on Ubuntu:
> > > http://ubuntuforums.org/showthread.php?t=934013
> > 
> > NetworkManager does turn the card on with CFUN=1 already.  I'll need
> > serial debug logging enabled to figure out what's going on with your
> > card.  Stop NM, then as root run it like:
> > 
> > NM_SERIAL_DEBUG=1 /usr/sbin/NetworkManager --no-daemon
> > 
> > and try a connection.  Attach the output of NM so we can figure out
> > what's actually going wrong here.
> > 
> > Dan
> > 
> > > My sim card doesn't require a password like the newer ones so this
> > > should be pretty simple.  But I can't seem to make it work.  I'm using
> > > the Ubuntu NM PPA.  Any ideas?
> > > 
> > > Thanks.
> > > 
> > > -James
> > > 
> > > _______________________________________________
> > > NetworkManager-list mailing list
> > > NetworkManager-list gnome org
> > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> > 
>