Re: gsm support for nokia 6680

[Daniel Qarras <dqarras yahoo com>]

Hi!

> > I tried this with my Nokia 6021 but it didn't help. Actually ATDT
> > works ok with Nokia 6021 when trying with wvdial. I think you
> > might want to check with wvdial, too, is it really so that your
> > 6680 does not support ATDT?
> > 
> > https://bugzilla.redhat.com/show_bug.cgi?id=296851
> 
> Do you use username and password ? Because one critical thing I
> forgot to tell in my email was that I had to set noauth in gconf for
> it to work

Username/password are defined in my wvdial.conf but they're not used
(they can be anything, ppp/peers/wvdial has option noauth). The problem
I see with NM is however hit before entering to that phase as the
serial commands fail randomly. Details can be found from the bottom of
the above bug report.

Fo reference, the working wvdial.conf is below.

[Dialer Defaults]
Baud = 230400
Init1 = ATZ E0
Init2 = AT+CPIN?
Init3 = AT+CREG?
Init4 = AT+COPS?
Dial Command = ATDT

[Dialer gprs]
Modem = /dev/ttyACM0
Phone = *99#
Username = A
Password = B

Thanks!




      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs