NM 0.7 can't connect to WPA network

[Joel Goguen <jgoguen jgoguen ca>]

I built NM 0.7 from SVN (current as of this morning) and when I try to 
connect to a WPA network, I get these messages.  Unfortunately, I'm not 
certain where to even begin looking to debug this, but hopefully some 
info about the network itself is a start.  The SSID contains only 
alphanumeric characters, but the passphrase contains non-alphanumeric 
characters, including # and !.  It's WPA/TKIP.  The same thing also 
happens on a WPA-Enterprise network using TTLS/PAP.  In this case, both 
the SSID and passphrase contain non-alphanumeric characters, including ! 
and @.  I'm running Ubuntu 7.10 and the driver is madwifi 0.9.3.  Both 
these networks worked perfectly using NM 0.6.5.

Any pointers on where to look to help debug this or suggestions to get 
this working would be greatly appreciated.

[jgoguen hermes:~/Code/network-manager-applet]$ sudo 
/usr/sbin/NetworkManager 
--pid-file=/var/run/NetworkManager/NetworkManager.pid --no-daemon
NetworkManager: <info>  starting...
NetworkManager: <info>  eth0: Device is fully-supported using driver 'sky2'.
NetworkManager: <info>  (eth0): exporting device as 
/org/freedesktop/Hal/devices/net_00_17_f2_2b_c6_20
NetworkManager: <info>  Now managing wired Ethernet (802.3) device 'eth0'.
NetworkManager: <info>  Bringing up device eth0
NetworkManager: <info>  Deactivating device eth0.
NetworkManager: <info>  ath0: Device is fully-supported using driver 
'ath_pci'.
NetworkManager: <info>  (ath0): exporting device as 
/org/freedesktop/Hal/devices/net_00_16_cb_bc_a6_4b
NetworkManager: <info>  Now managing wireless (802.11) device 'ath0'.
NetworkManager: <info>  Bringing up device ath0
NetworkManager: <info>  Deactivating device ath0.
NetworkManager: <info>  (eth0) supplicant interface is now in state 2 
(from 1).
NetworkManager: <info>  (ath0) supplicant interface is now in state 2 
(from 1).
NetworkManager: <info>  User request for activation of ath0.
NetworkManager: <info>  Activating device ath0
NetworkManager: <info>  Activation (ath0) Stage 1 of 5 (Device Prepare) 
scheduled...
NetworkManager: <info>  Activation (ath0) Stage 1 of 5 (Device Prepare) 
started...
NetworkManager: <info>  Activation (ath0) Stage 2 of 5 (Device 
Configure) scheduled...
NetworkManager: <info>  Activation (ath0) Stage 1 of 5 (Device Prepare) 
complete.
NetworkManager: <info>  Activation (ath0) Stage 2 of 5 (Device 
Configure) starting...
NetworkManager: <info>  Activation (ath0/wireless): access point 'Auto 
GamerCorner' has security, but secrets are required.
NetworkManager: <info>  Activation (ath0) Stage 2 of 5 (Device 
Configure) complete.
NetworkManager: <WARN>  get_secrets_cb(): Couldn't get connection 
secrets: applet.c.3297 (get_secrets_dialog_response_cb): failed to hash 
setting '802-11-wireless-security'..
NetworkManager: <info>  Activation (ath0) failed for access point 
(GamerCorner)
NetworkManager: <info>  Marking connection 'Auto GamerCorner' invalid.
NetworkManager: <info>  Activation (ath0) failed.
NetworkManager: <info>  Deactivating device ath0.

---------------------------------------------------

[jgoguen hermes:~/Code/network-manager-applet]$ nm-applet --sm-disable

** (nm-applet:4949): WARNING **: No connections defined

** (nm-applet:4949): WARNING **: No networks found in the configuration 
database
** Message: <info>  No keyring secrets found for Auto 
GamerCorner/802-11-wireless-security; ask the user

** Message: <info>  Got setting name: 802-11-wireless-security


** (nm-applet:4949): CRITICAL **: nm_setting_to_hash: assertion 
`NM_IS_SETTING (setting)' failed

** (nm-applet:4949): WARNING **: applet.c.3295 
(get_secrets_dialog_response_cb): failed to hash setting 
'802-11-wireless-security'.


--
Joel Goguen
http://jgoguen.ca/
The goal of Computer Science is to build something that
will last at least until we've finished building it.