GNOME.org
 

Re: problem connecting EAP/TLS wireless network

Thanks for the responding. 
I'm using ndiswrapper 1.18 and the Linksys driver is 3.90.36.0. I
understand the ndiswrapper is not the latest, however I assume it should
be OK since it works fine with my home network.
I'll try to compile the latest from source.

On Fri, 2006-09-22 at 17:50 -0400, Dan Williams wrote:
> On Fri, 2006-09-22 at 13:39 -0700, Arnold Wang wrote:
> > I'm having trouble to connect to my company's EAP/TLS wireless network
> > using NM. I'm running FC5 on my laptop and the NIC is Linksys WPC54G
> > using ndiswrapper driver. The NM is 0.6.4. The wpa_supplicant driver is
> > 0.4.8.
> > This combination works great with my home WPA2/AES wireless network. The
> > problem is with my company's EAS/TLS network. When I tried to connect to
> > the network, I was prompted to enter the WEP key. According to my
> > understanding of EAP/TLS, the keys are dynamically generated. I
> > shouldn't be prompted at all.
> 
> It looks like you need a better version of ndiswrapper, if that's what
> you're using for your card.  What version do you have?
> 
> Dan
> 
> 
> > I configured the software components in the following:
> > ------
> > /etc/sysconfig/wpa_supplicant:
> > # wlan0 and wifi0
> > # INTERFACES="-iwlan0 -iwifi0"
> > INTERFACES="-iwlan0"
> > # ndiswrapper and prism
> > # DRIVERS="-Dndiswrapper -Dprism"
> > DRIVERS="-Dndiswrapper"
> > -----
> > /etc/wpa_supplicant/wpa_supplicant.conf
> > ctrl_interface=/var/run/wpa_supplicant
> > ctrl_interface_group=wheel
> > ap_scan=2
> > 
> > network={
> >         ssid="any"
> >         key_mgmt=NONE
> > }
> > -----
> > NM configuration:
> > Network Name:	qrslan(SSID)
> > Wireless Security: WPA Enterprise
> > EAP:	TLS
> > Key Type:	Dynamic WEP
> > identity:	awang itlogon com(ID for RADIUS)
> > I have all the certificates configured as well.
> > The followings are the error messages I can find, which don't tell much:
> > ------
> > /var/log/messages:
> > Sep 22 13:27:10 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0) started...
> > Sep 22 13:27:10 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
> > Sep 22 13:27:10 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0) Stage 1 of 5 (Device Prepare) started...
> > Sep 22 13:27:10 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0) Stage 2 of 5 (Device Configure) scheduled...
> > Sep 22 13:27:10 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0) Stage 1 of 5 (Device Prepare) complete.
> > Sep 22 13:27:10 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0) Stage 2 of 5 (Device Configure) starting...
> > Sep 22 13:27:10 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0/wireless): access point 'qrslan' is encrypted, but NO valid key
> > exists.  New key needed.
> > Sep 22 13:27:10 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0) New wireless user key requested for network 'qrslan'.
> > Sep 22 13:27:10 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0) Stage 2 of 5 (Device Configure) complete.
> > Sep 22 13:27:33 arnoldw2 NetworkManager: <information>  Activation
> > (wlan0) New wireless user key request for network 'qrslan' was canceled.
> > (I clicked cancel on the prompt)
> > ---debug messages when I started wpa_supplicant manually
> > Initializing interface 'wlan0' conf
> > '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'ndiswrapper'
> > ctrl_interface 'N/A'
> > Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ->
> > '/etc/wpa_supplicant/wpa_supplicant.conf'
> > Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
> > ctrl_interface='/var/run/wpa_supplicant'
> > ctrl_interface_group=10 (from group name 'wheel')
> > ap_scan=1
> > Line: 5 - start of a new network block
> > ssid - hexdump_ascii(len=3):
> >      61 6e 79                                          any
> > key_mgmt: 0x4
> > Priority group 0
> >    id=0 ssid='any'
> > Initializing interface (2) 'wlan0'
> > EAPOL: SUPP_PAE entering state DISCONNECTED
> > EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> > EAPOL: SUPP_BE entering state INITIALIZE
> > EAP: EAP entering state DISABLED
> > EAPOL: External notification - portEnabled=0
> > EAPOL: External notification - portValid=0
> > SIOCGIWRANGE: WE(compiled)=20 WE(source)=18 enc_capa=0xf
> >   capabilities: key_mgmt 0xf enc 0xf
> > Own MAC address: 00:0c:41:e3:ca:ad
> > Driver does not support WPA.
> > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
> > Setting scan request: 0 sec 100000 usec
> > Added interface wlan0
> > Wireless event: cmd=0x8b06 len=8
> > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
> > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
> > State: DISCONNECTED -> SCANNING
> > Starting AP scan (broadcast SSID)
> > Scan timeout - try to get results
> > Received 607 bytes of scan results (3 BSSes)
> > Scan results: 3
> > Selecting BSS from priority group 0
> > 0: 00:0f:24:b6:9c:10 ssid='qrslan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
> >    skip - no WPA/RSN IE
> > 1: 00:0f:24:1d:0f:50 ssid='qrslan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
> >    skip - no WPA/RSN IE
> > 2: 00:06:25:a0:d1:98 ssid='HelpDesk' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
> >    skip - no WPA/RSN IE
> > No suitable AP found.
> > Setting scan request: 5 sec 0 usec
> > Wireless event: cmd=0x8b1a len=8
> > Wireless event: cmd=0x8b15 len=20
> > Wireless event: new AP: 00:00:00:00:00:00
> > Added BSSID 00:00:00:00:00:00 into blacklist
> > State: SCANNING -> DISCONNECTED
> > EAPOL: External notification - portEnabled=0
> > EAPOL: External notification - portValid=0
> > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
> > Wireless event: cmd=0x8b2a len=8
> > Wireless event: cmd=0x8b06 len=8
> > Wireless event: cmd=0x8c07 len=40
> > AssocReq IE wireless event - hexdump(len=32): 00 08 48 65 6c 70 44 65 73
> > 6b 01 04 82 84 0b 16 dd 06 00 40 96 01 01 00 dd 06 00 10 18 02 00 00
> > Wireless event: cmd=0x8c08 len=14
> > AssocResp IE wireless event - hexdump(len=6): 01 04 82 84 0b 16
> > Wireless event: cmd=0x8b15 len=20
> > Wireless event: new AP: 00:06:25:a0:d1:98
> > Association info event
> > req_ies - hexdump(len=32): 00 08 48 65 6c 70 44 65 73 6b 01 04 82 84 0b
> > 16 dd 06 00 40 96 01 01 00 dd 06 00 10 18 02 00 00
> > resp_ies - hexdump(len=6): 01 04 82 84 0b 16
> > WPA: clearing own WPA/RSN IE
> > State: DISCONNECTED -> ASSOCIATED
> > Associated to a new BSS: BSSID=00:06:25:a0:d1:98
> > No keys have been configured - skip key clearing
> > No network configuration found for the current AP
> > State: ASSOCIATED -> DISCONNECTED
> > No keys have been configured - skip key clearing
> > EAPOL: External notification - portEnabled=0
> > EAPOL: External notification - portValid=0
> > State: DISCONNECTED -> SCANNING
> > Starting AP scan (broadcast SSID)
> > Wireless event: cmd=0x8b1a len=8
> > Wireless event: cmd=0x8b15 len=20
> > Wireless event: new AP: 00:00:00:00:00:00
> > Added BSSID 00:06:25:a0:d1:98 into blacklist
> > State: SCANNING -> DISCONNECTED
> > EAPOL: External notification - portEnabled=0
> > EAPOL: External notification - portValid=0
> > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
> > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
> > Wireless event: cmd=0x8b2a len=8
> > Wireless event: cmd=0x8b06 len=8
> > Wireless event: cmd=0x8c07 len=40
> > AssocReq IE wireless event - hexdump(len=32): 00 08 48 65 6c 70 44 65 73
> > 6b 01 04 82 84 0b 16 dd 06 00 40 96 01 01 00 dd 06 00 10 18 02 00 00
> > Wireless event: cmd=0x8c08 len=14
> > AssocResp IE wireless event - hexdump(len=6): 01 04 82 84 0b 16
> > Wireless event: cmd=0x8b15 len=20
> > Wireless event: new AP: 00:06:25:a0:d1:98
> > Association info event
> > req_ies - hexdump(len=32): 00 08 48 65 6c 70 44 65 73 6b 01 04 82 84 0b
> > 16 dd 06 00 40 96 01 01 00 dd 06 00 10 18 02 00 00
> > resp_ies - hexdump(len=6): 01 04 82 84 0b 16
> > WPA: clearing own WPA/RSN IE
> > State: DISCONNECTED -> ASSOCIATED
> > Associated to a new BSS: BSSID=00:06:25:a0:d1:98
> > No keys have been configured - skip key clearing
> > No network configuration found for the current AP
> > State: ASSOCIATED -> DISCONNECTED
> > No keys have been configured - skip key clearing
> > EAPOL: External notification - portEnabled=0
> > EAPOL: External notification - portValid=0
> > Scan timeout - try to get results
> > Received 607 bytes of scan results (3 BSSes)
> > Scan results: 3
> > Selecting BSS from priority group 0
> > 0: 00:0f:24:b6:9c:10 ssid='qrslan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
> >    skip - no WPA/RSN IE
> > 1: 00:0f:24:1d:0f:50 ssid='qrslan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
> >    skip - no WPA/RSN IE
> > 2: 00:06:25:a0:d1:98 ssid='HelpDesk' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
> >    skip - no WPA/RSN IE
> > No APs found - clear blacklist and try again
> > Removed BSSID 00:06:25:a0:d1:98 from blacklist (clear)
> > Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
> > Selecting BSS from priority group 0
> > 0: 00:0f:24:b6:9c:10 ssid='qrslan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
> >    skip - no WPA/RSN IE
> > 1: 00:0f:24:1d:0f:50 ssid='qrslan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
> >    skip - no WPA/RSN IE
> > 2: 00:06:25:a0:d1:98 ssid='HelpDesk' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
> >    skip - no WPA/RSN IE
> > No suitable AP found.
> > Setting scan request: 5 sec 0 usec
> > CTRL-EVENT-TERMINATING - signal 2 received
> > Removing interface wlan0
> > State: DISCONNECTED -> DISCONNECTED
> > No keys have been configured - skip key clearing
> > EAPOL: External notification - portEnabled=0
> > EAPOL: External notification - portValid=0
> > No keys have been configured - skip key clearing
> > Cancelling scan request
> > 
> > 
> > 
> > 
> > 
> > 
> > _______________________________________________
> > NetworkManager-list mailing list
> > NetworkManager-list gnome org
> > http://mail.gnome.org/mailman/listinfo/networkmanager-list
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]