Robert Love wrote: > On Fri, 2006-02-03 at 15:04 +0100, Michael Biebl wrote: > >> There seems to be no --rundir argument for ./configure, at least not >> in the version I have. I have used --localstatedir instead, but that >> doesn't help all the same. >> Here is my complete configure line: > > Yah, there is no --rundir. I have the rundir set using the > localstatedir, so you want to do --localstatedir=/var (not /var/run), or > whatever is your usual localstatedir argument. You were right, setting it to /var fixed it. Now nm successfully connects to wpa_supplicant. Unfortunately I still can't get a connection. The dmesg log is filled with ipw2100: Fatal interrupt. Scheduling firmware restart. messages and NetworkManager times out after 90 secs (I increased the timeout from 20 to 90s). Again, I attached a log. I use kernel 2.6.15.2, the in kernel ipw2100 driver with the small wext16vs18 patch and the newest 1.3 firmware. Searching google this seems to be a known issue but I couldn't find a fix. Do you have any ideas how to fix this or what exactly is going wrong here? Thanks, Michael -- Why is it that all of the instruments seeking intelligent life in the universe are pointed away from Earth?
Feb 3 16:26:22 pluto NetworkManager: <information> Activation (wlan0) started... Feb 3 16:26:22 pluto NetworkManager: <information> Activation (wlan0) Stage 1 (Device Prepare) scheduled... Feb 3 16:26:22 pluto NetworkManager: <information> Activation (wlan0) Stage 1 (Device Prepare) started... Feb 3 16:26:22 pluto NetworkManager: <information> Activation (wlan0) Stage 2 (Device Configure) scheduled... Feb 3 16:26:22 pluto NetworkManager: <information> Activation (wlan0) Stage 1 (Device Prepare) complete. Feb 3 16:26:22 pluto NetworkManager: <information> Activation (wlan0) Stage 2 (Device Configure) starting... Feb 3 16:26:22 pluto NetworkManager: <information> Activation (wlan0/wireless): access point 'wgrouter' is encrypted, but NO valid key exists. New key needed. Feb 3 16:26:22 pluto NetworkManager: <information> Activation (wlan0) New wireless user key requested for network 'wgrout er'. Feb 3 16:26:22 pluto NetworkManager: <information> Activation (wlan0) Stage 2 (Device Configure) complete. Feb 3 16:26:26 pluto NetworkManager: <information> Activation (wlan0) New wireless user key for network 'wgrouter' receiv ed. Feb 3 16:26:26 pluto NetworkManager: <information> Activation (wlan0) Stage 1 (Device Prepare) scheduled... Feb 3 16:26:26 pluto NetworkManager: <information> Activation (wlan0) Stage 1 (Device Prepare) started... Feb 3 16:26:26 pluto NetworkManager: <information> Activation (wlan0) Stage 2 (Device Configure) scheduled... Feb 3 16:26:26 pluto NetworkManager: <information> Activation (wlan0) Stage 1 (Device Prepare) complete. Feb 3 16:26:26 pluto NetworkManager: <information> Activation (wlan0) Stage 2 (Device Configure) starting... Feb 3 16:26:26 pluto NetworkManager: <information> Activation (wlan0/wireless): access point 'wgrouter' is encrypted, and a key exists. No new key needed. Feb 3 16:26:27 pluto NetworkManager: <information> SUP: sending command 'INTERFACE_ADD wlan0 wext /var/r un/wpa_supplicant ' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: response was 'OK' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: sending command 'AP_SCAN 2' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: response was 'OK' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: sending command 'ADD_NETWORK' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: response was '0 ' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid 7767726f75746572' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: response was 'OK' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 proto WPA' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: response was 'OK' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 key_mgmt WPA-PSK' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: response was 'OK' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 psk *****' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: response was 'OK' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0' Feb 3 16:26:27 pluto NetworkManager: <information> SUP: response was 'OK' Feb 3 16:26:27 pluto NetworkManager: <information> Activation (wlan0) Stage 2 (Device Configure) complete. Feb 3 16:26:30 pluto kernel: ipw2100: Fatal interrupt. Scheduling firmware restart. Feb 3 16:26:31 pluto kernel: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Feb 3 16:26:42 pluto kernel: wlan0: no IPv6 routers present Feb 3 16:26:42 pluto kernel: ipw2100: Fatal interrupt. Scheduling firmware restart. Feb 3 16:26:50 pluto NetworkManager: <information> wlan0: link timed out. Feb 3 16:27:51 pluto kernel: ipw2100: Fatal interrupt. Scheduling firmware restart. Feb 3 16:27:57 pluto NetworkManager: <information> Activation (wlan0/wireless): association took too long (>90s), failing activation. Feb 3 16:27:57 pluto NetworkManager: <information> Activation (wlan0) failure scheduled... Feb 3 16:27:57 pluto NetworkManager: <information> Activation (wlan0) failed for access point (wgrouter) Feb 3 16:27:57 pluto NetworkManager: <information> Activation (wlan0) failed. Feb 3 16:27:57 pluto NetworkManager: <information> Deactivating device wlan0.
Attachment:
signature.asc
Description: OpenPGP digital signature