CVS 2-2 nmtest results



NM running. Hover NMApplet icons reads ... (86%). The signal strength bar is empty. There are two AP's in range but one is marginal.

[root localhost test]# iwlist eth1 scan
eth1      Scan completed :
         Cell 01 - Address: 00:0F:90:7B:30:A0
                   ESSID:"<hidden>"
                   Protocol:IEEE 802.11b
                   Mode:Master
                   Channel:1
                   Encryption key:on
                   Bit Rate:11 Mb/s
                   Extra: Rates (Mb/s): 1 2 5.5 11
                   Signal level=-70 dBm
                   Extra: Last beacon: 21ms ago
         Cell 02 - Address: 00:0F:90:7B:32:D0
                   ESSID:"<hidden>"
                   Protocol:IEEE 802.11b
                   Mode:Master
                   Channel:6
                   Encryption key:on
                   Bit Rate:11 Mb/s
                   Extra: Rates (Mb/s): 1 2 5.5 11
                   Signal level=-50 dBm
                   Extra: Last beacon: 4ms ago

Here is the test Dan requested.
[root localhost test]# ./nmtest
NM Status: 'connected'
Active device: '/org/freedesktop/NetworkManager/Devices/eth1'
Active device name: 'eth1'
Devices:
  /org/freedesktop/NetworkManager/Devices/eth0
      Device type: wired

  /org/freedesktop/NetworkManager/Devices/eth1
      Device type: wireless
      Strength: 86%
Active Network: '/org/freedesktop/NetworkManager/Devices/eth1/Networks/cuairnet'
      Networks:
/org/freedesktop/NetworkManager/Devices/eth1/Networks/cuairnet (cuairnet) Strength: 0% /org/freedesktop/NetworkManager/Devices/eth1/Networks/cuairnet (cuairnet) Strength: 0%

--
Bill Moss
Professor, Mathematical Sciences
Clemson University




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]