It says:
iMay:~ may$ autoconf --version
autoconf (GNU Autoconf) 2.65
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+/Autoconf: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>,
<http://gnu.org/licenses/exceptions.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by David J. MacKenzie and Akim Demaille.
iMay:~ may$ which autoconf
/opt/local/bin/autoconf
iMay:~ may$
On 3/23/10 6:03 PM, Shawn Bakhtiar wrote:
Sounds like a path issue....
what does your autoconf --version say.
bash-3.2$ autoconf --version
autoconf (GNU Autoconf) 2.63
then what does which autoconf say
bash-3.2$ which autoconf
/Users/shawn/gtk/inst/bin/autoconf
> Date: Tue, 23 Mar 2010 12:23:18 +0100
> From: phoebus apollonus net
> To: gtk-osx-users lists sourceforge net
> Subject: [Gtk-osx-users] Autoconf 2.54 or better not found
>
> Hey guys,
>
> i've been trying to build some stuff on my mac and I'm on the
beginning.
> I did jhbuild and it succeded.
> The, on "jhbuild bootstrap" I have problem- "autoconf 2.54 or
better
> could not be found":
>
> make[2]: Nothing to be done for `install-exec-am'.
> make[2]: Nothing to be done for `install-data-am'.
> *** Checking out automake-1.7 *** [3/7]
> *** Configuring automake-1.7 *** [3/7]
> ./configure --prefix /Users/may/gtk/inst --libdir
> '/Users/may/gtk/inst/lib' --disable-static
> checking for a BSD-compatible install...
/Users/may/.local/bin/install-check
> checking whether build environment is sane... yes
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for perl... /usr/bin/perl
> checking for tex... no
> configure: error: Autoconf 2.54 or better is required.
> Is it installed? Is it in your PATH? (try running `autoconf
--version')
> Is it working? See also config.log for error messages before this
one.
> *** Error during phase configure of automake-1.7: ########## Error
> running ./configure --prefix /Users/may/gtk/inst --libdir
> '/Users/may/gtk/inst/lib' --disable-static *** [3/7]
>
>
> CONFIG.LOG:
>
> Processor type: i486 (Intel 80486)
> Processors active: 0 1
> Primary memory available: 4.00 gigabytes
> Default processor set: 113 tasks, 356 threads, 2 processors
> Load average: 2.81, Mach factor: 0.67
> /bin/machine = unknown
> /usr/bin/oslevel = unknown
> /bin/universe = unknown
>
> PATH: /Users/may/gtk/inst/bin
> PATH: /opt/local/bin
> PATH: /opt/local/sbin
> PATH: /sw/bin
> PATH: /sw/sbin
> PATH: /usr/bin
> PATH: /bin
> PATH: /usr/sbin
> PATH: /sbin
> PATH: /usr/local/bin
> PATH: /usr/X11/bin
> PATH: /usr/X11R6/bin
>
>
> ## ----------- ##
> ## Core tests. ##
> ## ----------- ##
>
> configure:1285: checking for a BSD-compatible install
> configure:1340: result: /Users/may/.local/bin/install-check
> configure:1351: checking whether build environment is sane
> configure:1394: result: yes
> configure:1427: checking for gawk
> configure:1443: found /usr/local/bin/gawk
> configure:1453: result: gawk
> configure:1463: checking whether make sets $(MAKE)
> configure:1483: result: yes
> configure:1669: checking for perl
> configure:1699: result: /usr/bin/perl
> configure:1720: checking for tex
> configure:1749: result: no
> configure:1759: cd conftest && eval autoconf -o /dev/null
conftest.ac
> autom4te: need GNU m4 1.4 or later: /Users/may/gtk/inst/bin/m4
> configure:1762: $? = 1
> configure:1766: error: Autoconf 2.54 or better is required.
> Is it installed? Is it in your PATH? (try running `autoconf
--version')
> Is it working? See also config.log for error messages before this
one.
>
> ## ---------------- ##
> ## Cache variables. ##
> ## ---------------- ##
>
> ac_cv_env_build_alias_set=
> ac_cv_env_build_alias_value=
> ac_cv_env_host_alias_set=
> ac_cv_env_host_alias_value=
> ac_cv_env_target_alias_set=
> ac_cv_env_target_alias_value=
> ac_cv_path_PERL=/usr/bin/perl
> ac_cv_prog_AWK=gawk
> ac_cv_prog_make_make_set=yes
>
> ## ----------------- ##
> ## Output variables. ##
> ## ----------------- ##
>
> ACLOCAL='perllibdir=./lib
/Users/may/gtk/source/automake-1.7.9/aclocal
> --acdir=m4 -I /Users/may/gtk/source/automake-1.7.9/m4'
> AMTAR='${SHELL} /Users/may/gtk/source/automake-1.7.9/lib/missing
--run tar'
> APIVERSION='1.7'
> AUTOCONF='${SHELL}
/Users/may/gtk/source/automake-1.7.9/lib/missing
> --run autoconf'
> AUTOHEADER='${SHELL}
/Users/may/gtk/source/automake-1.7.9/lib/missing
> --run autoheader'
> AUTOMAKE='perllibdir=./lib
/Users/may/gtk/source/automake-1.7.9/automake
> --libdir=lib'
> AWK='gawk'
> CYGPATH_W='echo'
> DEFS=''
> ECHO_C=''
> ECHO_N='-n'
> ECHO_T=''
> EGREP=''
> FGREP=''
> INSTALL_DATA='${INSTALL} -m 644'
> INSTALL_PROGRAM='${INSTALL}'
> INSTALL_SCRIPT='${INSTALL}'
> INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
> LIBOBJS=''
> LIBS=''
> LN=''
> LTLIBOBJS=''
> MAKEINFO='${SHELL}
/Users/may/gtk/source/automake-1.7.9/lib/missing
> --run makeinfo'
> PACKAGE='automake'
> PACKAGE_BUGREPORT='bug-automake gnu org'
> PACKAGE_NAME='GNU Automake'
> PACKAGE_STRING='GNU Automake 1.7.9'
> PACKAGE_TARNAME='automake'
> PACKAGE_VERSION='1.7.9'
> PATH_SEPARATOR=':'
> PERL='/usr/bin/perl'
> SET_MAKE=''
> SHELL='/bin/sh'
> STRIP=''
> TEX=''
> VERSION='1.7.9'
> ac_ct_STRIP=''
> am__leading_dot='.'
> bindir='${exec_prefix}/bin'
> build_alias=''
> datadir='${prefix}/share'
> exec_prefix='NONE'
> host_alias=''
> includedir='${prefix}/include'
> infodir='${prefix}/info'
> install_sh='/Users/may/gtk/source/automake-1.7.9/lib/install-sh'
> libdir='/Users/may/gtk/inst/lib'
> libexecdir='${exec_prefix}/libexec'
> localstatedir='${prefix}/var'
> mandir='${prefix}/man'
> oldincludedir='/usr/include'
> pkgvdatadir='${datadir}/automake-1.7'
> prefix='/Users/may/gtk/inst'
> program_transform_name='s,x,x,'
> sbindir='${exec_prefix}/sbin'
> sharedstatedir='${prefix}/com'
> sysconfdir='${prefix}/etc'
> target_alias=''
>
> ## ----------- ##
> ## confdefs.h. ##
> ## ----------- ##
>
> #define PACKAGE "automake"
> #define PACKAGE_BUGREPORT "bug-automake gnu org"
> #define PACKAGE_NAME "GNU Automake"
> #define PACKAGE_STRING "GNU Automake 1.7.9"
> #define PACKAGE_TARNAME "automake"
> #define PACKAGE_VERSION "1.7.9"
> #define VERSION "1.7.9"
>
> configure: exit 1
>
>
> System:
> bash-3.2$ uname -a
> Darwin xxxxxxxxxxxxxx 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul
15
> 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 i386
>
>
------------------------------------------------------------------------------
> Download Intel® Parallel Studio Eval
> Try the new software tools for yourself. Speed compiling, find bugs
> proactively, and fine-tune applications for parallel performance.
> See why Intel Parallel Studio got high marks during beta.
> http://p.sf.net/sfu/intel-sw-dev
> _______________________________________________
> Gtk-osx-users mailing list
> Gtk-osx-users lists sourceforge net
> https://lists.sourceforge.net/lists/listinfo/gtk-osx-users
|
