Re: [GnomeMeeting-list] Gnomemeeting crashes suddenly



What version of GnomeMeeting?
0.93.0?
0.85.1
Can you provide a stack trace in gdb? It is probably a bug in pwlib or
GnomeMeeting triggered by a malfunction of your video driver. What is
your video driver? It can also be a conflict between installed OpenH323
and PWlib libraries. It happens when you are using conflicting libraries
that were not compiled together, or when you install things using
--force.

This is the debug tracer that I received at the moment I received the segmentation fault error. The version of Gnomemeeting I am running is 0.85.1, it is the latest binary stable version of Linux-mandrake 8.2.

(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...[New Thread 1024 (LWP 2856)]

0x41588409 in wait4 () from /lib/libc.so.6
#0  0x41588409 in wait4 () from /lib/libc.so.6
#1  0x4160798c in __check_rhosts_file () from /lib/libc.so.6
#2  0x40e33d56 in waitpid (pid=2915, stat_loc=0xbf7ff5bc, options=0)
    at wrapsyscall.c:172
#3  0x40fadeb9 in gnome_icon_entry_get_type () from /usr/lib/libgnomeui.so.32
#4  0x414fb478 in killpg () from /lib/libc.so.6
#5  0x40e30df0 in __pthread_wait_for_restart_signal (self=0xbf7ffc00)
    at pthread.c:969
#6  0x40e2cf4c in pthread_cond_wait (cond=0x81657f0, mutex=0x81657d8)
    at restart.h:34
#7  0x40c851aa in PSyncPoint::Wait () from /usr/lib/libpt.so.1
[New Thread 2049 (LWP 2859)]

Here is the dmesg reported:

[nogueira nogueira nogueira]$ dmesg | more
Linux version 2.4.18-6mdk (quintela bi mandrakesoft com) (gcc version 2.96 20000731 (Mandrake Linux 8.2 2.96-0.76mdk)) #1 Fri Mar 15 02:59:08 CET 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000037ffd000 (usable)
 BIOS-e820: 0000000037ffd000 - 0000000037fff000 (ACPI data)
 BIOS-e820: 0000000037fff000 - 0000000038000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
hm, page 37ffd000 reserved twice.
On node 0 totalpages: 229373
zone(0): 4096 pages.
zone(1): 225277 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=308 devfs=mount hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 801.835 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1599.07 BogoMIPS
Memory: 900596k/917492k available (1170k kernel code, 16508k reserved, 332k data, 260k init, 0k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch atnf csiro au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf06b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0596] at 00:04.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: Card 'OPL3-SAX Sound Board'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.10 (20020120) Richard Gooch (rgooch atnf csiro au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xe2000000, mapped to 0xf8800000, size 16320k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:03b8
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 53754 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci00:04.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALLlct20 20, ATA DISK drive
hdb: QUANTUM FIREBALLlct08 08, ATA DISK drive
hdc: Hewlett-Packard CD-Writer Plus 8200, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63, UDMA(33)
hdb: 16514064 sectors (8455 MB) w/418KiB Cache, CHS=1027/255/63, UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 p12 > p3
 /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 p8 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing....done.
Freeing initrd memory: 73k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 260k freed
Real Time Clock Driver v1.10e
Adding Swap: 265032k swap-space (priority -1)
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
ad1848: No ISAPnP cards found, trying standard ones...
opl3sa2: Activated ISA PnP card 0 (active=1)
opl3sa2: chipset version = 0x4
opl3sa2: Found OPL3-SA3 (YMF715E or YMF719E)
opl3sa2: 1 PnP card(s) found.
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: IOMEGA    Model: ZIP 100           Rev: 14.A
  Type:   Direct-Access                      ANSI SCSI revision: 00
  Vendor: HP        Model: CD-Writer+ 8200   Rev: 1.0f
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 196608 512-byte hdwr sectors (101 MB)
sda: Write Protect is off
 /dev/scsi/host0/bus0/target0/lun0: p4
sis900.c: v1.08.02 11/30/2001
PCI: Found IRQ 10 for device 00:0b.0
eth0: SiS 900 Internal MII PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 10, 00:40:33:aa:9e:59.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 03:23:39 Mar 15 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:04.2
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x553/0x202) is not claimed by any active driver.Linux video capture interface: v1.00
usb.c: registered new driver stv680
stv680.c: [stv680_probe:1555] STV(i): STV0680 camera found.
stv680.c: [stv680_probe:1583] STV(i): registered new video device: video0
stv680.c: [usb_stv680_init:1656] STV(i): usb camera driver version v0.24 registering
stv680.c: STV0680 USB Camera Driver v0.24
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0x3f0/0x2004) is not claimed by any active driver.
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1
printer.c: v0.8:USB Printer Device Class driver
eth0: Media Link On 100mbps full-duplex
Installing knfsd (copyright (C) 1996 okir monad swb de).
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
lp0: compatibility mode
lp0: compatibility mode
lp0: compatibility mode
Splash status on console 0 changed to off
stv680.c: [stv_init:428] STV(i): QVGA is supported
stv680.c: [stv_init:444] STV(i): Camera has 0 pictures.
stv680.c: [stv_init:475] STV(i): Video Mode set to QVGA
stv680.c: [stv_init:428] STV(i): QVGA is supported
stv680.c: [stv_init:444] STV(i): Camera has 0 pictures.
stv680.c: [stv_init:475] STV(i): Video Mode set to QVGA
stv680.c: [stv_init:428] STV(i): QVGA is supported
stv680.c: [stv_init:444] STV(i): Camera has 0 pictures.
stv680.c: [stv_init:475] STV(i): Video Mode set to QVGA
stv680.c: [stv_init:428] STV(i): QVGA is supported
stv680.c: [stv_init:444] STV(i): Camera has 0 pictures.
stv680.c: [stv_init:475] STV(i): Video Mode set to QVGA
Unable to handle kernel paging request at virtual address f989b000
 printing eip:
f99908f1
*pde = 01e24067
*pte = 00000000
Oops: 0002
CPU:    0
EIP:    0010:[<f99908f1>]    Not tainted
EFLAGS: 00210206
eax: 00000000   ebx: 0004a400   ecx: 0000414e   edx: 00000000
esi: 0004a400   edi: f989b000   ebp: 00000160   esp: e71ebd68
ds: 0018   es: 0018   ss: 0018
Process gnomemeeting (pid: 2862, stackpage=e71eb000)
Stack: 00018c00 e3060000 01808205 000000a1 e3096a40 c0105a20 f1366000 f1366000
       f61f08c0 f1366000 f1367efc c0114de8 f9861138 f6bc12e4 00000000 00000120
       00000142 00000000 f6bc1208 f6bc1200 e71ea000 00000001 f99910ee f6bc1200
Call Trace: [<c0105a20>] [<c0114de8>] [<f99910ee>] [<f9991cbe>] [<c0218137>]
   [<c01d6ffb>] [<c01d7183>] [<c021a0ea>] [<c0114aa4>] [<c01149d0>] [<c01421b6>]
   [<c01d3f9a>] [<c0142680>] [<f998c261>] [<c0141617>] [<c0106f23>]

Code: f3 ab f6 c3 02 74 02 66 ab f6 c3 01 74 01 aa 8b 74 24 3c c7
[nogueira nogueira nogueira]$


My cam is a AIPTEK Dual-Mod plugged in a USB port. I Guess that my main problem is the fact that the version I am running, is too old, despite it is the last one in Linux-Mandrake 8.2 stable repository.

Sincerely

Antonio Carlos Ribeiro Nogueira


Damien Sandras wrote:
le jeu 18-07-2002 à 14:05, Antonio Carlos Ribeiro Nogueira a écrit :
I don't know what is happening, but I am trying to run Gnomemeeting 
under Linux-Mandrake 8.2 in a Pentium III 850 MHz, with at
least 4Gb of HD allowable space, connected a LAN fairly fast. Well,

What version of GnomeMeeting?
0.93.0?

first I as soon Gnomemeeting pops up, I receive the following message:
"No gatekeeper found". I don't know how to configure "H.323 Gatekeeper
Settings". What must input in the "Gatekeeper host" and in the
"Gatekeeper ID" box? Please, if it exisits especific numbers (IP's) or

If you don't have a gatekeeper, then you should not choose to register
to it. You should select "Do not register to a gatekeeper", which is the
default option.

Machine Names, please give me some numbers of examples I can use. May I 
leave them blank?
After that I found a ILS Directory "netmeeting.cable.net.co" I met a lot
of people logged on. But when I call some of them, I receive the
following error message: "Error while opening video device /dev/video0/,
channel 1 A teste image will be transmitted. When the my image starts to

It is because you have no video camera for device /dev/video0, channel
1. Channel 0 is a more common setting. Channel 1 is in general not for
webcam, but is for TV cards. You should use default settings.

be transmitted, Gnomemeeting crashes. The smae happens when I try to see 
my self image. I can get the image for a very short time and then
Gnomemeeting crashes reporting me an "Segmentation Fault" and telling me

Can you provide a stack trace in gdb? It is probably a bug in pwlib or
GnomeMeeting triggered by a malfunction of your video driver. What is
your video driver? It can also be a conflict between installed OpenH323
and PWlib libraries. It happens when you are using conflicting libraries
that were not compiled together, or when you install things using
--force.

to go to visit the Homepage of "Gnome  Application Crash" for more 
information. I am not being able to send messages. I digit and send the
messages, but they don't arrives to the other people. But I am receiving
the images of the remote machines I am connected. When I use xawtv the
cam is working fine also. I can see my self image also without crashing.
Hope you may help me

Without stack trace it is very difficult. Nobody never reported any
crash due to video problems since the begin GnomeMeeting. If you provide
the video driver and the version of GnomeMeeting you are using, perhaps
we can help. Also, the last release of GnomeMeeting 0.93, you should at
least upgrade to this version and see if the problem still occurs. Huge
improvements have been made in GnomeMeeting 0.93 (which requires Gnome2
libraries).

-- 

_/_/_/_/ _/_/_/_/_/_/_/ _/_/_/ Prof. Antonio Carlos R. Nogueira, Dr. Eng.
_/ _/ _/ _/ _/ Departamento de Eng. Mecânica
_/_/_/ _/ _/ _/ _/ UFSC Universidade Federal de Santa Catarina
_/ _/ _/ _/ _/ 88.040-900 - Florianópolis - SC.
_/_/_/_/ _/ _/ _/ _/_/_/_/ BRASIL
Phone: 55-48-331-9264
Fax : 55-48-234-1519



_______________________________________________
Gnomemeeting-list mailing list
Gnomemeeting-list gnome org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list


_______________________________________________
Gnomemeeting-list mailing list
Gnomemeeting-list gnome org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



-- 

    _/_/_/_/ _/_/_/_/_/_/_/  _/_/_/  Prof. Antonio Carlos R. Nogueira, Dr. Eng.
   _/           _/  _/  _/  _/       Departamento de Eng. Mecânica
  _/_/_/       _/  _/  _/  _/ UFSC   Universidade Federal de Santa Catarina
 _/           _/  _/  _/  _/         88.040-900 - Florianópolis - SC.
_/_/_/_/     _/  _/  _/  _/_/_/_/    BRASIL
                                             Phone: 55-48-331-9264
                                             Fax  : 55-48-234-1519




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]