Re: [GnomeMeeting-list] multi point conferences



Hi...

as I read in this list I have to install OpenMcu to make multi conference
calls. Im using Gnomemeeting 0.12.2 ( which works fine for 2 users ) and
OpenMCU 1.0.12 but Im not able to set up a call. 

First I start the OpenMCU (./openmcu --vidoelarge --no-gatekeeper --username
"Server" --video --defaultroom "Video" --videotransmit)
then I connect from a different PC (in my own lan) to this Server, which
recognizes the incoming call:

Incoming H323 Call from PC 1 [192.168.0.1] has not selected a room.
Using room Video as the default. Accepting call from PC 1 [192.168.0.1]
using Gnomemeeting /0.12.2 with room ID Video. Not adding member
ip$192.168.0.1:32777/4956 to its own list
Started logical channel: sending MS-GSM {sw}<1>
Started logical channel: sending H.261-CIF <4>
Started logical channel: receiving MS-GSM{sw}<2>
Started logical channel: receiving H.261-CIF<6>

Video for postion 0: "192.168.0.1"
Video for postion 1: ""
Video for postion 2: ""
Video for postion 3: ""

Then same precedure with 2nd PC:

Accepting Call from Rechner 2 [192.168.0.2] using Gnomemeeting /0.12.2 with
room id Video.

Video for postion 0: "192.168.0.1"
Video for postion 1: ""
Video for postion 2: ""
Video for postion 3: ""

sometimes the 2nd PC is recognized:
Video for postion 0: "192.168.0.1"
Video for postion 1: "192.168.0.2"
Video for postion 2: ""
Video for postion 3: ""

but always the same problem:
PC 1 receives for the remote picture just a plain green backround image.
PC 2 receives a freezed image of its own cam!

Im lost, please help me.

Thanx a lot!

Regards Flo

-- 
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]