Re: [GnomeMeeting-devel-list] GM and esd

[Damien Sandras <dsandras seconix com>]

Le lundi 12 décembre 2005 à 15:36 +0100, Christoph Lukas a écrit :
> Hi Damien,
> 
> thanks for your response.
> 
> > > * GM does not seem to be able to handle the audio device when esd is
> > > running.
> > > 
> > 
> > I have tried here, and ESD is correctly suspended by GM. Perhaps your
> > problem is different?
> 
> I had to choose 'Default' instead of 'Intel 82801DB-ICH4' for both audio
> devices in the GM settings to make it work with esd.

Very weird, your distribution perhaps has a special setup using DMIX (it
will most probably add much latency and give a worse quality than using
the device directly).

> 
> But one minor problem remains in this setup:
> If 'Default' is chosen for both devices the incoming audio data has a
> delay of about a quarter to half a second while the outgoing data seems
> to have no delay. The jitter buffer slowly increases to its maximum
> allowed value of 500 ms. This is independent of esd running or not and
> can not be observed if the Intel devices are chosen instead of Default.
> 

It is because of DMIX (see above).

> Thanks in advance,
> Christoph
> 
> 
> 
> _______________________________________________
> Gnomemeeting-devel-list mailing list
> Gnomemeeting-devel-list gnome org
> http://mail.gnome.org/mailman/listinfo/gnomemeeting-devel-list
-- 
 _      Damien Sandras
(o-     
//\     GnomeMeeting: http://www.gnomemeeting.org/
v_/_    FOSDEM 2006 : http://www.fosdem.org
        SIP Phone   : sip:dsandras gnomemeeting net 
                      sip:600000 gnomemeeting net