[GnomeMeeting-devel-list] Quicknet / MicroTelco code updated

[Damien Sandras <dsandras seconix com>]

To all Quicknet and MicroTelco users:

The code has been updated, cleaned and enhanced. It has been tested and
proved to work with the classic IXJ driver due to the fact that NIXJ
doesn't work on my machine. However, I would like tests reports with
NIXJ too.

Here is a short list of tests to do:
- Do the same tests with Quicknet Output Device being POTS or headset.
Don't forget to change the appropriate option in the preferences to
reflect what type of device you have connected to the Quicknet card.

- When calling somebody you should hear a dial tone using POTS and
headset as output.

- When a call ends you should hear a busy tone using a POTS until you
put the phone on hook, and a busy tone during 3 seconds if you are using
a headset.

- The sliders in the Control Panel -> Audio section should modify the
volumes

- You should hear a ring when you are called when using a POTS, and
nothing when using a headset. 

- Playing with the PC-To-Phone configuration dialog should
register/unregister you from the MicroTelco gatekeeper.

- You should have no problem changing the plugin type during a call and
switch from Quicknet to anything else.

I'm mostly interested in tests done with a recent version of NIXJ.

Thank you,
-- 
 _      Damien Sandras
(o-     
//\     It-Optics s.a.
v_/_    GnomeMeeting: http://www.gnomemeeting.org/
        FOSDEM 2004:  http://www.fosdem.org
        H.323 phone:  callto:ils.seconix.com/dsandras seconix com