Re: Mandriva 2008 and libusb

[Frederic Crozat <fcrozat mandriva com>]

Le mercredi 31 octobre 2007 à 07:44 +1100, Andrew Greig a écrit :
> On Tue, 2007-10-30 at 17:56 +0100, Frederic Crozat wrote:
> > Le mardi 30 octobre 2007 à 21:19 +1100, Andrew Greig a écrit :
> > > Hi all,
> > > 
> > > I understand that a Palm LifeDrive should sync "out of the box" with
> > > Mandriva 2007+later under libusb. I have tried under 2007, 2007.1 and
> > > now 2008 without success.  In my desperation to use my business tool I
> > > reverted to the visor module under 2007.1 and it was very reliable. I
> > > have upgraded to Mandriva 2008 and I am otherwise pleased with it, but
> > > sync is really a major irritation.
> > > 
> > > bash-3.2$ cat /proc/bus/usb/devices (snip)
> > > T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0
> > > D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > > P:  Vendor=0830 ProdID=0061 Rev= 1.00
> > > S:  Manufacturer=palmOne, Inc.
> > > S:  Product=palmOne Handheld
> > > S:  SerialNumber=PVG0M635V3E1
> > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=500mA
> > > I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> > > E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=1250us
> > > E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > > E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > > E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > > (/snip)
> > > 
> > > As you can see the Palm LifeDrive is detected but it will not sync under
> > > libusb0.1_4.
> > > 
> > > For some reason the visor module was loaded and I ran rmmod visor,
> > > before trying the usb: setting.
> > > 
> > > If I have missed something glaringly obvious, please be gentle;-)
> > 
> > So, it looks like pilot-link doesn't detect your Lifedrive.
> > 
> > Try running (and make sure visor module is NOT loaded) :
> > PILOT_DEBUG=DEV PILOT_DEBUG_LEVEL=DEBUG PILOT_LOG=1
> > PILOT_LOGFILE=/tmp/your_pilot_log_file pilot-xfer -p usb: -l 
> > 
> > so we can see why it doesn't work.
> 
> Thanks Frederic,
> 
> [root andrew log]# PILOT_DEBUG=DEV PILOT_DEBUG_LEVEL=DEBUG PILOT_LOG=1
> PILOT_LOGFILE=/tmp/Andrew_Greig_log_file pilot-xfer -p usb: -l
> 
>    Listening for incoming connection on usb:... usb_set_debug: Setting
> debugging level to 2 (on)
> usb_set_debug: Setting debugging level to 0 (off)
> usb_set_debug: Setting debugging level to 2 (on)
> usb_set_debug: Setting debugging level to 0 (off)
> usb_set_debug: Setting debugging level to 2 (on)
> usb_set_debug: Setting debugging level to 0 (off)
> usb_set_debug: Setting debugging level to 2 (on)
> usb_set_debug: Setting debugging level to 0 (off)
> usb_set_debug: Setting debugging level to 2 (on)
> usb_set_debug: Setting debugging level to 0 (off)
> usb_set_debug: Setting debugging level to 2 (on)
>  etc..... till pilot times out
> 
> Here is the log:
> libusb.c 379 (u_open).
> libusb.c 387 (u_open).
> libusb.c 415 (u_wait_for_device).
> libusb.c: checking device 0x8058d08
> libusb.c: checking device 0x8059dd0
> libusb.c: checking device 0x805be90
> libusb.c: 132, 0x0830 0x0061.
> libusb.c: trying to open device 0x805be90
> libusb.c: USB_handle=0x8053e10
> usb: PALM_GET_EXT_CONNECTION_INFORMATION, num_ports=1,
> endpoint_numbers_different=1
>         [0] port_function_id='Lsfr'
>         [0] port=2
>         [0] endpoint_info=98
> usb: PALM_GET_EXT_CONNECTION_INFORMATION - no hotsync port found.
> libusb.c: USB configure failed for familar device: 0x0830 0x0061.
> (LifeDrive issue?)

I think, from the log, it is quite clear now : there is an issue in
pilot-link through libusb with LifeDrive and you are hitting it.

Maybe David Desrosiers will have a clue about it ?

-- 
Frederic Crozat <fcrozat mandriva com>
Mandriva