Re: Re: Please help: gpilotd network sync (some progress)

[Giuseppe Castagna <Giuseppe Castagna ens fr>]

Hello sorry for starting a new thread but since I just subscribed I have
no mail to answer to. 

I have exactly the same problems as Andreas

> the story gets interesting now. I compiled the gnome-pilot from the
sources
> and inserting a line into gpilotd.c for the UX50 which has device id 0x0144:
> >>"Vendor=054c ProdID=0144", /* Sony Clie UX50 */
> 
> 

I also added a line TRUE in product_net right below


> Since i did that, the pi-nredir -p works for the UX50 ! WOW!
> 
> [andreas MediaServer gnome-pilot.d]$ pi-nredir -p /dev/ttyUSB0 
> 
>    Port not connected, sleeping for 2 seconds, 2 retries..
>    Listening to port: /dev/ttyUSB0
> 
>    Please press the HotSync button now... Connected
> 
>         Trying 192.168.1.100... Connected
> 
> WOW WOW WOW!!!
> 
> And if i run immediately after the pi-nredir the network sync from the UX50
> i get an WARNING from gpilotd "unknown pilot - no pilot matches ID -
> 17329724 use gnomecc ..." 
> 
> 

For me the error is different.
The pi-nredir after having connected ends up with

  Error accepting data on /dev/ttyUSB0

while the gpilotd daemon tells me 

gpilotd-Message: setting PILOTRATE=115200
(gpilotd:4601): gpilotd-WARNING **: An error occured while getting the pilot's system data


> But it works only once after i have run this pi-nredir, don't know if this
> is really a success or not. 
> 

Useless to say that with the standard 2.0.10 nothing happens, 
but that everything works with pilot-xfer, multisyc etc etc ... 

There is a new bug in bugzilla about it.

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=119657

so it seems that we are at least 4 persons having this problem

Thanks a lot for your help.


---Beppe---